• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.44-48
• /
• 2003

할로겐 난연재료 및 고분자의 연소시 Dioxine의 문제점이 대두되고 있어 유럽국가를 중심으로 할로겐 난연제 사용을 규제하고 있다. 환경과 인체에 대한 안정성을 고려해서 저 유해 가스화, 저 발연화, 저 부식성, 리사이클링 등을 겸비한 제품의 개발로 관심이 모아지고 있는 실정이다. 본 연구에서는 환경친화적인 금속화합(수산화 알루미늄)을 사용하여 연소시 발생할 수 있는 난연성, 무독성, 소연성 등을 함량별로 확인하고 난연재가 증가할수록 취약한 기계적 물성 보완을 위해 moisture cure crosslikable 기술로 케이블절연 및 자켓 피복층 특성을 증가 시켰다. 그러나 수산화알루미늄 함량이 증가할수록 기계적 물성과 기타 특성도 감소하는 경향을 보이고 있어 최적의 난연제 조성함량이 약 130~150 phr정도에서 우수한 결과를 확인하였다. 또한 moisture cure agent는 전선압출 시 표면에 scorch 및 장기 압출에 영향을 주므로 약 1.5~2phr 범위에서 처방하는 것이 우수하다. 원료투입 후 mixing 공정 중에서는 온도관리가 매우 중요하므로 되도록 믹싱 온도를 $130^{\circ}C$ 이하를 유지해야한다. 온도는 수산화알루미늄의 분산성과 케이블 피복압출 시 표면에도 영향을 주기 때문이다 본 연구는 이런 작업방법을 통해 친환경 가교 난연콤파운드가 비(比) 가교된 제품에 비해 특성이 증가되는 것을 입증할 수 있었다.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.3
• /
• pp.41-49
• /
• 2005

Styrofoam as shock-absorbing materials for packaging has been regarded as one of non-biodegradable products leading to soil contamination at a landfill and release of dioxine during its incineration. For avoiding severe burdens on our environments by styrofoam, it must be replaced by environment-friendly materials. In order to evaluate availability of pulp fibers as a substitute for styrofoam, various extrusion processes were applied for making optimal biodegradable products. Then thermomechanical pulp fibers made of Pinus radiata and Pinus rigida were uniformly mixed with other additives such as starch and polyvinyl alcohol prior to expansion. The physical properties of the final products were examined by measuring expansion efficiency, compression strength, and elastic modulus. Wheat starch played a key role to maintain optimal flowing conditions within the barrel of the extruder irrespective of addition of soluble starch and polyvinyl alcohol. However, as the amounts of wheat starch in raw-materials increased, the elastic modulus of the expanded materials greatly increased. High elastic modulus is not suitable as shock-absorbing products for packaging. Thus the wheat starch must be added at a minimum if possible, that is, below 20% based on oven-dried weight of pulp fibers. the elastic modulus of the expanded products was decreased as their moisture contents increased. For the products containing 20% wheat starch, the lowest elastic modulus, 844.64 kPa was obtained under 10% of the moisture content. This was similar to that of styrofoam.

• The Korean Journal of Pesticide Science
• /
• v.10 no.1
• /
• pp.1-6
• /
• 2006

A methodology for the syntheses of carboxanilides using solid support of 4-chloro-3-nitorbenzophenone oxime resin 5 was developed. Condensation of 4-chloro-3-nitorbenzophenone resin 6 with hydroxylamine hydrochloride salt gave oxime resin 5. The reaction of oxime resin 5 with dioxin and oxathiin derivatives 7a-d afforded the corresponding polymer-bound dioxin and oxathiin derivatives 9a-d. These polymer-bound resins 9a-d were treated respectively with aniline in the presence of acetic acid resulted in the corresponding dioxin carboxanilides 10a-d (yield, 5%-quantitative).

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.12
• /
• pp.1280-1286
• /
• 2006

Three different virgin activated carbons made of each coal(Calgon), coconut(Samchully) and wood(Picabiol) based activated carbon(AC) were tested for an adsorption performance of 1,4-dioxane in a continuous adsorption column. Breakthrough behavior was Investigated that the breakthrough points of coal, coconut and wood based AC were observed as 3600 bed volumn(BV), 1440 BV and 144 BV respectively. Adsorption capacity(X/M) of coal, coconut and wood based AC was observed. The reported results of adsorption capacity showed that coal based AC was highest(578.9 ${\mu}g/g$), coconut based AC was intermediate(142.3 ${\mu}g/g$) and wood based AC was lowest(7.4 ${\mu}g/g$) due to increasing specific surface area. Moreover, carbon usage rates(CURs) for coal, coconut and wood based AC had been shown as 0.48 g/day, 1.41 g/day and 6.9 g/day respectively. The constant characteristic of the system, k of coal based AC was found to be 91.5 and k of coconut based AC was found to be 17.9. Removal efficiencies of 1,4-dioxane with different ozonation dosages(2 and 5 mg/L) for 20 min ozonation had been shown 38% and 87% respectively. There was no observation for biological removal of 1.4-dioxane by attached micro-organisms when used(3.1 years and over 5 years) biological activated carbon(BAC) without pretreatment of oxidation were employed. When a combination of ozonation(2 mg/L and 5 mg/L) and BAC process for $10{\sim}30$ min was applied, removal efficiency for 1,4-dioxine increased only $2{\sim}6%$ compared to only applying ozonation. Therefore removal efficiency of BAC process prior to using oxidation was proven to negligible. Consequently, the results presented in this paper provide a better insight into the adsorption performance of 1,4-dioxane. This observation suggests that using virgin activated carbon made of coal is the best selection for removal of 1,4-dioxane in the water treatment for an advanced treatment. It is clear from this research that longer EBCT for ozonation or higher ozone concentration are more effective operation methods for removal of 1,4-dioxane than longer EBCT in the BAC process.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.3
• /
• pp.329-336
• /
• 2006

Iron manufacturing process involves production of various by-product including slag, sludge, sintering and EAF(Electric Arc furnace dust). Some of the by-products such as EAF and sintering dust are disposed of as waste due to their high heavy metal contents. It has been notice for many years that the EAF dust also contain about 65% of Fe(0) and Fe(II) and then the possible utilization of the iron. One possibility is to apply the EAF as a lining material in conjunction with clay or HDPE liners, in waste landfill. The probable reaction between the leachate containing toxic elements such as TCE, PCE dioxine and $Cr^{6+}$ is reduction of the toxic materials in corresponding to the oxidation of the reduced iron and therefore diminishing the toxicity of the leachate. It is, however, prerequisite to evaluate the leaching characteristics of the EAF dust before application. Amelioration of the leachate would be archived only when the level of toxic elements in the treated leachate is less than that of in the untreated leachate. Several leaching techniques were selected to cover different conditions and variable environments including time, pH and contact method. The testing methods include availability test, pH-stat test and continuous column test. Cr and Zn are potentially leachable elements among the trace metals. The pH of the EAF dust is highly alkaline, recording around 12 and Zn is unlikely to be leached under the condition. On the contrary Cr is more leachable under alkaline environment. However, the released Cr should be reduced to $Cr^{3+}$ and then removed as $Cr(OH)_3$. Removal of the Cr is observed in the column test and further study on the specific reaction of Cr and EAF dust is underway.