• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.336-336
• /
• 2011

AMOLED에 대한 관심이 높아짐에 따라 LTPS (Low Temperature Poly Silicon) TFT에 대한 연구가 활발히 이루어지고 있다. 다결정 실리콘은 단결정 실리콘에 비해 100 cm2/V 이상의 이동도를 보이는 우수한 특성으로 인해 AMOLED 디스플레이에 적합하며 여러 기업에서 LTPS 공정을 이용한 TFT제작을 연구 중이다. LTPS 공정은 현재 ELA (Excimer Laser Annealing) 방식으로 대면적 유리기판에 ELA 방법을 적용함에 있어 설비투자 비용이 지나치게 높아진다는 단점을 가지고 있다. 설비투자 비용의 문제점을 해결하기 위해 Diode Laser을 이용하여 Annealing하는 방법에 대해 연구하였다. 본 연구는 Diode Laser Annealing 방식을 이용하여 poly-Si을 구현하였다. 단결정 실리콘을 제작하기 위해 ICP-CVD장비를 이용하여 150$^{\circ}C$에서 SiH4, He2 혼합, He/SiH4의 flow rate는 20/2[sccm], RF power는 400 W에서 700 W으로 가변, 증착 압력은 25mTorr으로 하였다. 940 nm 파장의 30 W Diode Laser를 8 mm Spot Size로 a-Si에 순간 조사하여 결정화, 그 결과 grain을 형성한 polycrystalline 구조를 확인하였다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권2호
• /
• pp.141-146
• /
• 2021

This study aimed to explore whether photodynamic therapy using Radachlorin and diode laser is an effective inhibitor of Candida albicans. Suspensions of Candida albicans were obtained, inoculated in petri dishes with Radachlorin, and incubated for 30 min. Then, the laser light of a diode laser was irradiated at at energy densities of 3 J/cm², 5 J/cm², 7 J/cm². As a result, Candida albicans showed a killing rate of 91.5% at an energy density of 7 J/cm². This study found that photodynamic therapy using a Radachlorin and diode laser was effective for the inhibition of Candida albicans.

• 대한의생명과학회지
• /
• 제15권1호
• /
• pp.81-86
• /
• 2009

Lasers are necessity in our life related to the fields of medicine and cosmetic surgery. With 808 nm diode laser and $CO_2$ laser, we made some wounds on a dorsum of rat by laser irradiation. All of irradiations shows thermal effects on the whole region of skin tissues. They make wound damage depending on laser power and irradiation time. Because a collagen is plays an important role in tissue repair, we studied collagen accumulation in wound tissue. For wound healing, collagen accumulation was found in the near region of damage in epidermis and dermis layer of the rat skin. In case of the quantitative analysis of collagen in wound tissue, the amount of collagen in wound tissue by $CO_2$ laser irradiation is higher than that of 808 nm diode laser irradiation. And re-epithelialization was significantly faster in wound by $CO_2$ laser irradiation compared with that of 808 nm diode laser irradiation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.203-206
• /
• 2002

We implemented 2.5Gbps optical transponder by using uncooled laser diode and measured temperature effects of 2.5Gbps uncooled laser diode, such as optial power vs. injection current, extinction ratio, and power penaty.

• Bulletin of the Korean Chemical Society
• /
• 제19권8호
• /
• pp.822-824
• /
• 1998

The simple and convenient measurement of the dissociation constant of an indicator, thymol blue, was achieved by using a portable diode-laser/fiber-optic thermal lensing spectroscopy, which consisted of a visible diode laser, a photodiode, and an optical fiber. It gives comparable results to the cited value obtained from a conventional UV/VIS spectroscopy.

• 한국군사과학기술학회지
• /
• 제10권4호
• /
• pp.152-159
• /
• 2007

In this paper, a new design technique on the LRF which is useful for low power laser and a CBDA(Cummulative Binary Detection Algorithm) is proposed. The LD(Laser Diode) and Si-APD(Silicon Avalanche Photo Diode) are used for saving a power. In order to prove the detection range, the Si-APD binary data are accumulated before the range computation and the range finding algorithm. A prototype of the proposed DLRF(Diode Laser Range Finder) system was made and tested. An experimental result shows that the DLRF system have the same detection range using a less power(almost 1/32) than an usual military LRF. The proposed DLRF can be applied to the Unmanned Vehicles, Robot and Future Combat System of a tiny size and a low power LRF.

• 한국연소학회지
• /
• 제11권3호
• /
• pp.26-35
• /
• 2006

This work forcus on the development of gas sensor that measure the concentrations of exhaust gas using diode laser, Each diode laser for exhaust gas measurement is set to work at near-IR using both DA and WMS methods. Also use of fiber-coupled optical elements makes such a sensor rugged and easy to align. The results showed that gas concentrations of $O_2$, CO, $CO_2$, NO are accurately measured within ${\pm}2%$ error. The application of WMS method increased the beam intensity 2-3 times higher than DA method. It were experimentally compared WMS (Wavelength Modulation Spectroscopy) with DA (Direct Absorption) for the accuracy.

• 한국연소학회지
• /
• 제17권1호
• /
• pp.12-21
• /
• 2012

Simultaneous measurements of oxygen concentration and temperature using diode laser in the combustion environment are successfully accomplished. A single DFB type diode laser of 760 nm line centre frequency is used and the scanned-wavelength direct absorption spectroscopy method and wavelength modulation spectroscopy method are applied to measure absorption signals below 793 K temperature region. The experimental results show that oxygen concentration are measured within 1% accuracy and temperature are measured within 5% accuracy. This new method of simultaneous measurements of concentration and temperature with a single diode laser shows a great promise.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1663-1667
• /
• 2003

This thesis is on tile development of LD(Laser Diode) chip tester and the control system based on graphical programming language(LabVIEW) to control the equipment. The LD chip tester is used to test the optic power and the optic spectrum of the LD Chip. The emitter size of LD chip and the diameter of the receiver(optic fiber) are very small. Therefore, in order to test each chip precisely, this tester needs high accuracy. However each motion part of the tester could not accomplish hish accuracy due to the limit of the mechanical performance. Hence. an image processing with machine vision was carried out in order to compensate for the error. and also a load test was carried out so as to reduce tile impact of load on chip while the probing motion device is working. The obtained results were within ${\pm}$5$\mu\textrm{m}$ error.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.113-117
• /
• 2017

With the increasing use of high-power laser diode bars (LDBs) and stacked LDBs, the issue of thermal control has become critical, as temperature is related to device efficiency and lifetime, as well as to beam quality. To improve the thermal resistance of an LDB set, we propose and analyze a bypass heat sink with a top canopy structure for an LDB set, instead of adopting a thick submount. The thermal bypassing in the top-canopy structure is efficient, as it avoids the cross-sectional thermal saturation that may exist in a thick submount. The efficient thickness range of the submount in a typical LDB set is guided by the thermal resistance as a function of thickness, and the simulated bypassing efficiency of a canopy is higher than a simple analytical prediction, especially for thinner canopies.