• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.692-699
• /
• 2000

We build and analyze some types of queueing model to discuss capacity dimensioning of access links of a LAN interworking unit connected to the Internet backbone network. We assume that the IWU has a FIFO buffer to transmit IP packets to the Internet through the backbone. In order to analyze the system, we use a Poisson process and an MMPP process as input traffic models of IP packets and we use a general service time distribution as a service time model. But we use both an exponential service time and a deterministic service time in numerical examples for simple and efficient performance comparisons. As performance measures, we obtain the packet loss probability and the mean packet delay. We present some numerical results to show the effect of arrival rate, buffer size and link capacity on packet loss and mean delay.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.49-55
• /
• 2004

This paper presents the mechanical and thermal stress analysis of a disposal canister to provide basic information for dimensioning the canister and configuration of the canister components. The structural stress analysis is carried out using a finite element analysis code, NISA, and focused on the structural strength of the canister against the expected external pressures due to the swelling of the bentonite buffer and the hydrostatic head, and the thermal load build up in the container.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3B
• /
• pp.225-234
• /
• 2009

Recently IPTV service is penetrating to the ordinary home users very swiftly. One of the first phase of IPTV service is considered to be VoD, and a nationwide availability of the VoD service imposes tremendous pressure to the network resource due to its requirements for the broad bandwidth, the inherent nature of unicast technology, and the large scalability, etc. This work suggests a novel and practical method to the design of network resource for the VoD service. Especially, we explore the distributed content storage problem that takes into account the popularity of the video contents and its corresponding link dimensioning problem that takes into account the grade of service for the flow level quality of service about the VoD service. By assuming a realistic topology for the nationwide IP backbone network of Korea, which is a typical tree topology, we suggest an analytic method for the design of VoD service.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.798-803
• /
• 1988

This paper is concerned with a computer-aided supporting system to a systematic check of mechanical drawings. The problems treated in this paper are limited to the checking of the omissions and mis-writings of dimensioning in the mechanical drawings made by a CAD system. A drawing check system has been made up on a personal computer with Basic and Pascal. The feasibility of the proposed drawing check system is confirmed for omissions and mis-writings of dimensioning in mechanical drawings.

• Computers and Concrete
• /
• v.2 no.2
• /
• pp.111-123
• /
• 2005

The ductility of reinforced concrete bearing walls subjected to high axial loading and moment can be enhanced by improving the deformability of the compression zone or by reducing the neutral axis depth. The current state-of-the-art procedure evaluating the confinement effect prompts a consideration of the spaces between the transverse and longitudinal reinforcing bars, and a provision of tie bars. At the same time, consideration must also be given to the thickness of the walls. However, such considerations indicate that the confinement effect cannot be expected with the current practice of detailing wall ends in Korea. As an alternative, a comprehensive method for dimensioning boundary elements is proposed so that the entire section of a boundary element can stay within the compression zone when the full flexural strength of the wall is developed. In this comprehensive method, the once predominant code approach for determining the compression zone has been advanced by considering the rectangular stress block parameters varying with the extreme compression fiber strain. Moreover, the size of boundary elements can also be determined in relation to the architectural requirement.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.183-188
• /
• 2014

Solenoid operated electromagnetic control valve (ECV) using in an external variable displacement swash plate type compressor is widely used for air conditioning control system because of its low energy consumption and high efficient characteristics. ECV controls the entire vehicle air conditioning system by means of a pulse width modulation (PWM) system that supplied from an external controller. Different pressure ports located within ECV has important functions to control the air/refrigerant flow through its internal passages. The flow paths are preciously maintained with acceptable ranges of leakage (gap) between the parts inside it which is followed by effective design and critical dimensioning of its internal features. Therefore, it saves energy losses from the solenoid operation as well as ensures the balance of forces within it. The research paper highlights analysis of the leakages (at different pressure ports) and dimensioning tolerance factors that affects the ECV performance.

• 기술발표회
• /
• s.2006
• /
• pp.220-231
• /
• 2006

Debris flows are a natural hazard which looks like a combination of flood, land and rock slide. Large rainfall in July 2006 produced several large scale debris flows and many small debris flows that resulted in loss of life and considerable property and highway damage, as was widely reported in the national media. The hazard "debris flow" is still insufficiently researched Furthermore debris flows are very hard to predict. In this paper, a general over view of the debris flow problems along the highway, a generic way for the design and dimensioning of flexible barrier systems will be presented. A brief description of the various unique barrier types will be provided, too. The future for these barrier concepts looks promising because these barriers represent the state of art for such applications and are superior to many other available options.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2019.05a
• /
• pp.167-168
• /
• 2019

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.9-17
• /
• 2003

In this paper we proposea method for estimating the bandwidth in next-generation If network. Especially, we concentrate on the edge routers accommodating the VoIP connections as well as a group of data connections. Bandwidth dimensioning is carried out at call level and packet level for voice traffic in the next-generation IP network. The model incorporates the statistical estimation approach at a call level for obtaining the number of voice connections simultaneously in the active mode. The call level model incorporates a statistical technique to compute the statistics of the number of active connections such as the mean and variance of the simultaneously connected calls in the network. The packet level model represents a load map for voice and data traffic by using non-preemptive M/G/1 queuing model with strict priority for voice over data buffer, From the proposed traffic model, we can derive a graph for upper bounds on the traffic load in terms of bandwidth for voice and data connections. Via numerical experiments we illustrate the implication of the work.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.185-186
• /
• 2005