• 한국정보시스템학회지:정보시스템연구
• /
• 제14권2호
• /
• pp.293-317
• /
• 2005

Female customers form a major customer group for Internet shopping and their trust on Internet stores seems to be significantly related with their transactions. This paper focuses on female customers' trust on Internet stores, hypothesizing that online service quality has a positive impact on trust and that trust, in turn, together with service quality has a positive effect on loyalty. We investigate trust from three dimensions(benevolence, integrity, and ability) and at the same time, unlike existing research, treat service quality to have five dimensions (intangibles, reliability, responsiveness, assurance, and empathy) as known in SERVQUAL(Parasuraman et al., 1988). Survey data is obtained from the female college student sample. Our research model is justified in terms of construct validity, internal consistency, and goodness of fit. Research hypotheses are tested using SEM(Structural Equation Modeling). The results are as follows: First, assurance and empathy dimensions of service quality have significant impacts on benevolence/integrity dimension of trust. Second, out of the five service quality dimensions, only assurance has a positive effect on ability dimension of trust. Third, assurance dimension of service quality and ability dimension of trust are positively related with customer loyalty. The most important factors for female customers' loyalty are found to be assurance(service quality) and ability(trust). The significance of assurance is in line with findings from existing research. But its relationship with the trust dimensions is uncovered in this research, and the only dimension that impacts on ability is assurance. We find that female customers build trust about internet stores based on their ability rather than on their benevolence/integrity and that the female customers' perception on the internet stores' ability can be improved by higher service quality from the aspect of assurance. Importantly enough, these findings offer practical guidelines to Internet stores to boost female customers' loyalty.

• 제어로봇시스템학회논문지
• /
• 제14권4호
• /
• pp.327-331
• /
• 2008

An in-line wet etch/cleaning system was established for the research and development in wet etch process as a formation of electrode such as metal or transparent conductive oxide layer. A reverse moving system was equipped in the in-line wet etch/cleaning system for the alternating motion of glass substrate in a wet etch bath of the system. Therefore, it was possible for the glass substrate to be moved back and forth and it was possible to reduce the size of the system by using the reversing moving system. For the effect of the alternating motion of substrate on the etch rate in the in-line wet etch bath, indium tin oxide(ITO) patterns were obtained through wet etch process in the in-line system in which the substrate was moved back and forth. From the CD(critical dimension) skews resulted from the ADI CD and ACI CD of the ITO patterns, it was concluded that the alternating motion of glass substrate are possible to be applied to the mass production of wet etch process.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.271-276
• /
• 2006

Railroads made many contribution to modernization being developed so quickly as public transportation, but after middle of 20 century, its qualities are getting low because of focusing on the investment and development of cars and airplanes. Its role which is getting the excellent merits on the mass transportation, rapid transit. safety, state period, energy efficiency, and prevention of environmental pollution has been reconsidered. Element of horizontal alignment In an existing railroad line is needed as basic materials, when it will be improved or moved. If its design drawing was lost or damaged, it is impossible to recover. It is riot easy to repair for it as disasters. We must understand an existing railroad line to bring a function included a basic geography situation. In this studies we acquire, analyze. and handle the digital picture of railroads and then reappear shape of three dimension. But also we want to contribute to establish the facilities information choosing materials of existing railroad line in outputting the alignment element by reverse.

• 마이크로전자및패키징학회지
• /
• 제4권2호
• /
• pp.25-32
• /
• 1997

대용량, 고속 정보처리가 요구되는 System의 모듈은 Data 처리의 고속성 및 회로의 고집적이 가능한 MCM의 형태로 구현되어 ATM, GPS 및 PCS 등의 분야에 광범위하게 응 용되고 있다. 위와 같은 High Speed 응용분야에서의 System 성능은 Interconnect Line의 전달지연, 임피던스 부정합에 의한 신호 반사 손실. 신호선 간의 Crosstalk, Ground Bounce 등의 현상에 대한 최적화 여부에 결정적인 영향을 받는다. 그러나 Interconnect의 특성상 정 형이 존재하지 않으므로 추상적인 Library를 구축하는 형식으로 접근할 수밖에 없으며 이를 위하여 여러기본 구조를 정의한후 각 Dimension을 변수로 두고 해석 결과를 합성하여 Database화하는 접근방식이다. 본 논문에서는 MCM-D 공정을 이용하여 Interconnect Line 특성을 분석하고 Database화 하기 위한 Test Pattern을 구현하고 Time Domain reflectometry(TDR)을 이용하여 그특성들을 측정 분석하였다. Test pattern 제작은 MCM-D 공정으로 최소선폭 27$\mu$m, Via Hole 75$\mu$m으로 형성하였고 2 Layer Signal과 GND로 총 3Layer를 구현하였다. 특성분석을 위해 TDR장비와 모데링 및 Simulation S/W인 IPA 510 을 사용하였다. 이를 통해 MCM-D를 이용한 공정에서 Interconcet Line의 고주파 특성을 측정하고 정량화하여 LIbrary를 제작할수 있었다.

• Structural Engineering and Mechanics
• /
• 제25권5호
• /
• pp.565-576
• /
• 2007

The article describes a technique for the measurement of the level of complexity of fracture surfaces by the method of vertical sections, and a performed statistical analysis of the effect of profile lines on the fractographic and fractal parameters of fractures, i.e. the profile line development factor, $R_L$, and the fracture surface development factor, $R_S$, (as defined by the cycloid method), as well as the fractal dimension, $D_C$, (as determined by the chord method), and the fractal dimension, $D_{BC}$, (as determined by the box method). The above-mentioned parameters were determined for fracture surfaces of basalt and gravel concretes, respectively, which had previously been subjected to fracture toughness tests. The concretes were made from mixtures of a water/cement ratio ranging from 0.41 to 0.61 and with a variable fraction of coarse aggregate to fine aggregate, $C_{agg.}/F_{agg.}$, in the range from 1.5 to 3.5. Basalt and gravel aggregate of a fraction to maximum 16 mm were used to the tests. Based on the performed analysis it has been established that the necessary number of concrete fracture profile lines, which assures the reliability of obtained testing results, should amount to 12.

• 정보관리학회지
• /
• 제19권3호
• /
• pp.237-261
• /
• 2002

본 연구는 기대와 성과간의 비교를 통하여 이용자 관점에서 도서관 온라인 서비스에 대한 품질을 평가하였다. 이를 위해 22개 SERVQUAL 문항에 정보품질에 관련된 7개 항목을 추가하여 총29개의 측정항목을 개발하였고, 대덕연구단지내의 한 연구 도서관을 대상으로 온라인 설문을 실시하여 데이터를 수집하였다. 요인분석 결과 온라인 서비스의 품질을 결정하는 요소인 서비스차원은 5개로 묶여졌고, 정보품질 차원은 별개로 분리되어 나타났다. IPA(Importance Performance Analysis) 분석결과 정보품질, 신뢰성, 그리고 보증성이 중요한 서비스 요소임이 밝혀졌고, 다중회귀분석 결과 이용자의 만족에 가장 커다란 영향을 미치는 서비스 요소로는 유형성과 정보품질인 것으로 규명되었다.

• 한국생활과학회지
• /
• 제22권1호
• /
• pp.99-116
• /
• 2013

The purpose of this research is to explore the levels of luxury-frugality consumption of the female consumers and classify their types on luxury-frugality consumption behaviors. Total of 479 on-line questionnaires were surveyed nationwide for this research in February, 2012. Statistical analysis was achieved by using t-test, one-way ANOVA, Duncan's multiple range test, ${\chi}^2$, and Ward' hierarchical cluster analysis with a total of 479 questionnaires. The research results are summarized as follows: First, the overall luxury-frugality consumption average mark of female consumers was 2.44. Second, all surveyed female consumers were classified into four types based on the means scores of two dimension luxury-frugality consumption behaviors. A total 26.51% of female consumers belonged to Type 1 (named as luxury consumption group) where females scored high points on two dimension luxury consumption behaviors. Type 2 (named as excessive consumption group) occupied 32.78% and this group scored low on the luxurious consumption but high on the overconsumption. Type 3 (named as prefer prestige group) occupied 28.39% and this group scored low on the overconsumption but high on the luxurious consumption. Type 4 (named as frugal consumption group) had 12.32% of females whose scores of two dimension luxury-frugality consumption behaviors were low.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.6.1-6.1
• /
• 2011

Nanoscale block copolymer (BCP) patterns have been pursued for applications in sub-30 nm nanolithography. BCP self-assembly processing is scalable and low cost, and is well-suited for integration with existing semiconductor fabrication techniques. However, one of the major technical challenges for BCP self-assembly is limited tunability in pattern geometry, dimension, and functionality. We suggest methods for extending the degree of tunability by choosing highly incompatible polymer blocks and utilizing solvent vapor treatment techniques. Siloxane BCPs have been developed as self-assembling resists due to many advantages such as high etch-selectivity, good etch-resistance, long-range ordering, and reduced line-edge roughness. The large incompatibility leads to extensive degree of pattern tunability since the effective volume fraction can be easily manipulated by solvent-based treatment techniques. Thus, control of the microdomain size, periodicity, and morphology is possible by changing the vapor pressure and the mixing ratio of selective solvents. This allows a range of different pattern geometry such as dots, lines and holes and critical dimension simply by changing the processing conditions of a given block copolymer without changing a polymer chain length. We demonstrate highly extensive tunability (critical dimension ~6~30 nm) of self-assembled patterns prepared by a siloxane BCP with extreme incompatibility.

• 전자공학회논문지CI
• /
• 제38권2호
• /
• pp.27-32
• /
• 2001

본 논문은 패러렐 카메라 모델을 사용한 카메라 캘리브레이션과 3차원 스캐닝 알고리즘에 관한 것이다. 레이저 스트립라인이 스테레오 매칭을 위해 보조적으로 사용하였으나 원리적으로는 불필요하다. 피측정 물체는 스뎀핑모터에 의해 플레이트 위에서 360도 회전하며, 카메라로부터 거리를 측정하여 월드좌표를 구한다. 피측정 물체의 월드좌표는 모델좌표로 변환되며 다수의 군집 모델좌표로부터 모델링을 위한 면을 추출하고 OpenGL을 이용하여 렌더링 한다. 본 알고리즘은 에피폴라 라인의 매칭점의 유효성을 검사하여 잘못된 매칭값을 버리고 무효한 매칭값은 유효한 값으로부터 보간법으로 산출한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2130-2135
• /
• 2007

Operating characteristics of a loop heat pipe (LHP) having a bypass line was investigated experimentally. The LHP had a sintered metal wick as a capillary structure and methanol as a working fluid. The sintered metal wick was made of stainless steel of which the average pore size was 5 ${\mu}m$and porosity of 47%. A bypass line of a small diameter was attached between the vapor escape passage and the liquid reservoir. The dimension of the flat evaporator was $50(L){\times}40(W){\times}30(H)$ mm and that of the condenser was $50(L){\times}40(W){\times}11(H)$ mm. Wall and pipe material of the LHP was stainless steel and heating area was 35(W) mm${\times}$35(L) mm. The inner diameters of vapor and liquid transport lines were 4.0 mm and 2.0 mm, and the lengths of the two lines were both 0.5 m. The LHP was tested for three different tilt angles of horizontal, favorite tilt, and adverse tilt. The thermal load range was up to 290 W at the condenser above evaporation position. Furthermore, the effect of a bypass line on the start-up transient as well as steady-state operation was presented and discussed.