고온자전연소법에 의한 질화알루미늄 합성에 있어서, 반응물(Al) 형상과 희석제(AlN) 입도 등의 형상학적 조건이 반응생성물에 미치는 영향을 조사하였다. 평균 입경(34$\mu$m)이 같은 두 종류의 Al 분말(입상, 편상)과 평균입경이 다른 4종류의 AM분말을 희석제로 사웅하여 반응 성형체를 준비하였다. 반응성형체의 충진밀도는 이론밀도의 $35\%로 고정하였고, 초기 질소압은 $1\~10MPa$, 희석을은 $0.4\~0.7$로 변화시키면서 반응을 실시하였다. 반응물과 희석제의 입도를 비슷하게 조절함으로써, 상대적으로 질소압이 낮은 1MPa의 조건에서도 순도 $98\% 이상, 입경 수십 $\mu$m의 AlN 합성이 가능함을 확인하였다. 이러한 고순도, 고입경화는 연소파 진행 후, 성형체 내부로 질소가스 투입 용이성의 차이에 의한 현상이라고 판단된다.
황화이온검출기로서 2가지 형태의 연속 flow-through 전극계의 분석적 감응성질을 조사하고, 최적조건에서 그들의 감응특성을 직접 비교하였다. 두 검출계에 있어서 측정한 봉우리전위를 황화이온농도의 대수값과 관련지웠으며, 적어도 시간당 20개의 시료를 정량할 수 있었다. pH전극법에서는 투석기를 지나 흘러가는 recipient stream의 pH를 측정하였다. 장치는 연속흐름형의 기체투석기가 관형 polymer 막전극과 연결되도록 설계되어 있다. 이 방법의 최적실험조건은 recipient $5.0 {\times} 10^{-5} M NaOH + 5.0 {\times} 10^{-3} M$ NaCl과 diluent 0.10M $H_2SO_4$이며, recipient stream, diluent stream 및 시료의 유속은 모두 1.0ml/min이다. 황화이온 전극법에서는 시판하는 황화이온선택성 전극을 flow-through cell 속의 황화이온을 검출하는 데에 썼다. 이 방법의 최적실험조건인 황화이온 산화방지 완충제(1.0M NaOH 용액에 3.5g 아스코르브산과 7.6g $Na_2EDTA$를 용해)와 시료의 유속은 각각 1.4 ml/min와 1.0 ml/min이다.
본 논문에서는 석탄으로부터 생성된 합성천연가스(SNG)의 다양한 연료 조성에 대한 배기가스 배출 특성 및 희석제에 대한 NOx배출 저감에 대해 기술하였다. 예혼합거리가 짧은 부분 예혼합 가스터빈 연소기에서 SNG 연료조성에서의 수소 비율과 입열량, 당량비를 조절해 가며 연소특성을 관찰하였다. 수소 비율에 따른 NOx 배출지수는 유사하게 나타났고, 화염가시화를 통해 화염의 특성을 파악할 수 있었다. CO 배출의 경우 당량비 1 구간에서 특이점이 나타났으며, 이를 화염의 자발광 이미지와 자발광 강도를 통하여 원인을 파악할 수 있었다. 또한 높은 NOx 배출을 저감하기 위하여 질소($N_2$)와 이산화탄소($CO_2$) 희석제를 사용하여 희석제 공급량에 대한 저감 효과를 파악하였다. 이로부터 희석제의 비열과 열용량이 연소로부터 발생한 연소열을 흡수하여 열화에 의한 NOx 배출을 저감하는 효과를 확인하였다.
본 연구에서는 headspace-solid phase microextraction(HS-SPME)-GC/MS법을 이용하여 PVC 벽지의 원자재에서 방출되는 TVOC를 분석하여 기여도를 평가하였다. 시료로 사용한 원자재는 6종으로 희석제, 안정제, 가소제, 충전제, 발포제와 PVC 레진이다. 각 원자재 시료를 22 mL 바이알에 9 mL씩 취한뒤 $100^{\circ}C$에서 1시간동안 평형을 이룬 다음 $75{\mu}m$ Carboxen-PDMS 화이버로 $25^{\circ}C$에서 1시간 흡착하여 GC/MS로 분석하였다. 정성결과 toluene, ethylbenzene 그리고 xylene과 같은 방향족 화합물과 acetone, methoxyacetone, 2-butanone 등의 케톤류와 nonane, decane, undecane 등의 알켄류가 검출되었다. 그 밖에도 ethanol, butanol 등의 알콜류와 알데히드류 등이 검출되었다. TVOC 방출량은 희석제 $54.20{\mu}g/g$, 안정제 $32.88{\mu}g/g$, 가소제 $0.50{\mu}g/g$, PVC 레진 $0.88{\mu}g/g$, 발포제 $0.22{\mu}g/g$, 충전제가 $0.11{\mu}g/g$로 나타났다. 각 원자재의 TVOC 방출량과 배합비를 고려한 TVOC 기여도는 희석제 0.708, 안정제 0.129, PVC 레진 0.115 순으로 높게 나타났다. 따라서 희석제와 안정제, PVC레진의 질적인 개선을 통해 TVOC 방출량을 줄이는 노력이 필요하다. 또한 본 연구에서 개발한 HS-SPME-GC/MS 방법은 원자재의 TVOC 분석에 유용하게 사용될 것으로 생각된다.
For the vehicle of UV ink formulated with prepolymer and/or reactive diluent, according to change photoinitiator concentration, we measured viscoelasticity of films of bisphenol A diacrylate cured by UV irrdiation, investigated dynamic characteristics and structural changes.
Transactions on Electrical and Electronic Materials
/
제15권2호
/
pp.77-80
/
2014
The effect of reactive diluents on the ac electrical treeing in epoxy/nanosilicate systems was studied, in a needle-plate electrode geometry. Diglycidyl ether of bisphenol A (DGEBA) type epoxy was used as a base resin, and layered silicate was used as a nano-sized filler. Polyglycol (PG) or 1,4-butanediol diglycidyl ether (BDGE) was introduced as a reactive diluent to the DGEBA/nanosilicate system, in order to decrease the viscosity of the nanocomposite system. PG acted as a flexibilizer, and BDGE acted as a chain extender, after the curing reaction. To measure the treeing propagation rate, a constant alternating current (ac) of 10 kV/4.2 mm (60 Hz) was applied to the specimen, in a needle-plate electrode arrangement, at $30^{\circ}C$ of insulating oil bath. When 10 kV/4.2 mm (60 Hz) was applied, the treeing propagate rate in the DGEBA system was $1.10{\times}10^{-3}$ mm/min, and that in the DGEBA/PG system was $1.05{\times}10^{-3}$ mm/min. As 1.5 wt% of nanosilicate was added to the DGEGA/PG system, the propagation rate was $0.33{\times}10^{-3}$ mm/min. This meant that the nano-sized layered silicates would act as good barriers to treeing propagation. The effect of chlorine content was also studied, and it was found that chlorine had a bad effect on the electrical insulation property of the epoxy system.
Pure tantalum powder has been produced by combining Na as a reducing agent, $K_2$TaF$_{7}$ as feed material, KCl and KF as a diluent in a stainless steel (SUS) bomb, using the method of metallothermic reduction. And we examined various types of after-treatment that affect the high purification of powder. A significant amount of impurities contained in recovered powder was removed in various conditions of acid washing. In particular, 20% (HCl + HNO$_3$) was effective in removing heavy metal impurities such as Fe, Cr and Ni, 8% H$_2$SO$_4$ + 8% $Al_2$(SO$_4$)$_3$ in removing fluorides such as K and F from non-reactive feed material, and 2% $H_2O$$_2$ + 1 % HF in removing oxides that formed during reaction. Significant amounts of oxygen and part of light metal impurities could be removed through deoxidation and heat treatment process. On the other hand, because it is difficult to remove completely heavy metal impurities such as Fe, Cr, and Ni through acid washing or heat treatment process if their contents are too high, it is considered desirable to inhibit these impurities from being mixed during the reduction process as much as possible.
The influence of oxygen concentration and CO$_{2}$ as diluent in oxidizer side on soot characteristics was studied by Laser Induced Incandescence, Time Resolved LII and Transmission Electron Microscopy photography in non-premixed co flowing flames. Through the comparison of TEM photographs and the decay rate of LII signal, suitable two delay times of TIRE-LII method and signal sensitivity ($\Delta$S$_{TIRE-LII/) were determined. The effects of O$_{2}$ and CO$_{2}$ as diluent in oxidizer side on soot formation are investigated with these calibrated techniques. The O$_{2}$+CO$_{2}$, N$_{2}$, and [Ar+CO$_{2}$] mixture in co-flow were used to isolate CO2 effects systematically. The number concentration of primary particle and soot volume fraction abruptly decrease by the addition of CO$_{2}$ to the co-flow. This suppression is resulted from the short residence time in inception region because of the late nucleation and the decrease of surface growth distance by the low flame temperature due to the higher thermal capacity and the chemical change of CO$_{2}$ including thermal dissociation. As the oxygen concentration increases, the number concentration of soot particles at the inception region increases and thus this increase of nucleation enhances the growth of soot particle.
The maintenance of physiological activity during dilution is very critical for the accurate enumeration of Vibrio spp. in marine samples. We investigated the effect of various diluents on the recovery of Vibrio parahaemolyticus using the direct plate counting and most probable number (MPN) methods. The effects of NaCl (0.85 and 3%) and pH (from 6.6 to 7.4) in diluents based on distilled water or phosphate buffered saline (PBS) were evaluated with three V. parahaemolyticus strains. PBS-3% NaCl (pH 6.6), as opposed to PBS, was the most effective diluent at maintaining viable cell numbers up to 2 log CFU/g during dilution for direct plate counting using on thiosulfate citrate bile salts sucrose (TCBS) selective agar, as well as minimizing the difference in cell numbers between TCBS and non-selective nutrient agar. It also increased counts of V parahaemolyticus inoculated into oysters relative to PBS (p<0.01), suggesting that PBS-3% NaCl (PH 6.6) can reduce the problem of underestimating V. parhaemolyticus counts using PBS alone.
자주복(Takifugu rubripes) 정자의 액상보존을 위한 기초자료를 얻고자, 수조사육한 전장 43.5-45.1 cm, 체중 1.7-2.0 kg의 2-3년생 자주복 수컷을 재료로 하여, 정자의 액상보존 효과를 연구하였다. 희석액으로 marine fish ringer solution과 1% NaCl을 사용하여 7일간 보존하였을 때, SAI와 정자의 생존율이 각각 1.7과 $59.0\pm1.5%,\;1.6$과$\;56.7\pm6.2%$로 가장 높았다. 정자를 3-5배로 희석하여 보존하였을 때, 가장 높은 SAI와 정자의 생존율을 보였으며, 보존온도로는 0- 5$^{\circ}C$가 적절하였다. SAI와 정자의 생존율을 높이기 위한 항생제로는 neomycin (800 ppm)이 효과적이었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.