• Journal of the Korean Magnetics Society
• /
• v.10 no.6
• /
• pp.302-309
• /
• 2000

An MFL (Magnetic Flux Leakage) testing system has been developed in order to inspect the non-metallic inclusions in the thin steel sheets. We have made a differential type flux-gate magnetometer using the measurement of apparent coercive field strength of soft magnetic core. The specifications of the electromagnet was determined using FEM software, and MFL testing system with 3 axis degree of freedom was constructed. The feasibility testing for non-metallic inclusion was shown using the system. By digitizing MFL signal and using 2-D graphic display, we could identify various surface defects other than the inclusions.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1131-1133
• /
• 1998

Distribution facilities are installed dispersedly nationwide and in view of huge amounts. it makes it difficult to manage and update distribution facilities information manually. Consequently, much efforts have been exerted on computerization of distribution facilities information. KEPCO has been building distribution facilities information system using GIS technology(DGIS) to manage distribution facilities. In order to implement DGIS, digitizing the existing cartographical and land registration map is essential. In this regard, the Government is pursuing the NGIS project. In parrallel with it, DGIS project will be accelerated in the future. This paper suggests the efficient development plans to computerize distribution facilities using GIS technology.

• Proceedings of the Safety Management and Science Conference
• /
• 1999.11a
• /
• pp.565-574
• /
• 1999

In reverse engineering area, it is rapidly developing reconstruction of surfaces from scanning or digitizing data, but geometric models of existing objects unavailable many industries. This paper describes new methodology of reverse engineering area, good strategies and important algorithms in reverse engineering area. Furthermore, proposing reconstruction of surface technique is presented. A method find base geometry and blending surface between them. Each based geometry is divided by triangular patch which are compared their normal vector for face grouping. Each group is categorized analytical surface such as a part of the cylinder, the sphere, the cone, and the plane that mean each based geometry surface. And then, each based geometry surface is implemented infinitive surface. Infinitive average surface's intersections are trimmed boundary representation model reconstruction. This method has several benefits such as the time efficiency and automatic functional modeling system in reverse engineering. Especially, it can be applied 3D scanner and 3D copier.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07b
• /
• pp.796-798
• /
• 2005

역사적 가치가 높은 고문서의 훼손을 방지하고 접근을 용이하게 하기 위해서 고문서 전산화가 필요하다. 이를 위한 작업에서는 고문서의 방대한 양을 빠르고 정확하게 처리하는 기술이 필수적이다. 본 논문은 고문서 전산화를 위한 분할 방법과 인식 방법을 제안한다. 인식을 이용한 분할 방법을 통해 신속하면서도 정확하게 문서내의 문자영역을 찾아낸다. 또한 인식기로부터 생성된 점수를 확률화 하여 신뢰도를 높이고 이를 문자의 모양 및 문맥정보와 결합을 통해 분할과 후처리를 수행한다. 제안하는 방법은 고문서 전산화 과정에서 사람의 수작업을 최소화하기 위해 유용하다.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1170-1172
• /
• 1996

Analog-digital converter boards for use in personal computers have recently being improved markedly, many kinds of high speed(1 MHz - 10 MHz sampling rale) and over 12-bit vertical resolution A/D boards released. It can be applicable to high frequency magnetic measurements. In measurement of magnetic properties of high frequency, digitizing oscilloscope or trasient recorder are being used. but, those price are often expensive, we constructed PC controlled A-C B-H loop tracer that can measure Bs, Br, He, permeability and may be applied about 100 Hz - 20 kHz range. it use IBM PC compatible 1 M Sample/s, 12 bit A/D converter board with SSH(Simultaneous Sample and Hold).

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.470-472
• /
• 2003

The primary goal in this paper is to analyze urban growth patterns using multi-temporal remote sensing images and geographic information data. In order to accomplish this purpose, firstly data pre-processing is carried out, and then land-use maps are generated with ancillary data source by heads-up on-screen digitizing. Lastly, using the results of the previous stages, the patterns of land-use and urban changes are monitored by the proposed scheme. In this research, using the multi-temporal images and geographic information data, monitoring of urban growth was carried out with the application of urban land-use changes.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.29-47
• /
• 2003

This study is to analyze the kinematic variables in release motion of discuss throwing. For the matter, 5 people from the national team and collegiate discuss throwing in the year 2001 were chosen as the subjects and two S-VHS video cameras set in 60frames/sec were used for recording their motions. Coordinated raw positions data through digitizing are smoothing by butter-worth 's low-pass filtering method at a cut off frequency 6.0Hz. and the direct linear transformation(DLT) method was employed to obtain 3-D position coordinates. The conclusions were as follows; 1. The better record players showed the shorter approach time in the last support phase. 2. In the displacement CG, the better record players showed the shorter displacement in medial-lateral direction, and the longer displacement in horizontal direction. In the motion, the COG showed longer displacement vertical direction. 3. The better record players showed the faster horizontal velocity than vertical velocity in the release. 4. The better record players showed to take the posture of vertical axis in the release.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.132-137
• /
• 2010

In the multi-pass shape drawing process, the appropriate process design is very important to produce sound products. The reduction ratio, die angle, and the intermediate die shape are very important process variable of the multi-pass shape drawing. The aim of this study is the determination of the reduction ratio, die angle, and the intermediate die shape of the 2 pass shape drawing process for producing steering spline shaft. In this study, FE analysis, Taguchi method, and ANN(artificial neural network) were applied to determine the appropriate reduction ratio, die angle, and intermediate die shape. After the determination of the process variables, FE analysis and drawing experiment were performed to evaluate the effectiveness of the determined process variables. The dimensional accuracy of the final drawn spline shaft was evaluated by using 3D surface profiler and 3D laser digitizing system.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.93-100
• /
• 2000

Die-casting burr due to casting process is removed by post-process for assembly and quality control of product. Though robot has been widely used for deburring job before, CNC exclusive machine is currently developed f3r high power, high speed machining and quick tool change. Deburring tool path with complex 3D curve type is defined to make out deburring NC program. But there is no efficient method to define it currently used methods with teaching probe on machine. In this study the efficient method to make out deburring NC program is developed. 5-axis digitizing machine is used to receive data of deburring path. And the post processor for NC program generation is developed in consideration of the machining conditions. The developed system is not dependent on the skill of operator and has the advantage to maintain the flexibility of job to modify NC program due to the wear of tool and aging of the die casting.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.3
• /
• pp.235-242
• /
• 2002

This study is focused on the analysis of road extracting accuracy from the high resolution IKONOS satellite image data. A geometric correction of the image is performed using the RFM and interpretation with the screen digitizing is also performed for extracting the roads information. For the evaluation of road extracting accuracy, the road locations and the road widths are compared with the national digital map. The comparison results shows that the road boundary and the size of road width are able to extract with the geometric accuracy of $\pm$3.4m and $\pm$1.1m.