• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 D
• /
• pp.1044-1047
• /
• 1997

This paper presents development of practical and universal program that is applied to ${\pi}$ loop system which is based on basic algorithm of network optimization for reduction investment cost and rationalization of underground plan. This system is ease to input and modify about information of powerline drawing, that is, can input easily condition of their calculation referring to candidate of underground apparatus under using digitizer.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2014년도 제50차 하계학술대회논문집 22권2호
• /
• pp.239-240
• /
• 2014

본 논문에서는 싱글 보드컴퓨터(SBC)에서 마우스와 디지타이저를 이용한 입력장치설계에 대하여 연구하고자 한다. 산업용 제어현장에서 사용되는 SBC는 아날로그 방식의 입력장치를 주로 사용하지만, 현재의 컴퓨터 주변장치를 직접 사용할 수 없는 경우가 대부분이다. 본 논문에서는 PC에서 사용하는 다양한 주변장치를 SBC에서 사용할 수 있도록 신호를 변환하는 입력장치를 설계 제작하였다. PC 주변장치는 MCU를 이용하여 신호를 해석한 후, SBC 입력장치 신호형식으로 변환하여 제공하였다. 설계 제작된 입력장치는 마우스 디지타이져, 터치스크린 등 다양한 장치들을 SBC에서 사용이 가능함을 보였다.

• 대한인간공학회지
• /
• 제18권1호
• /
• pp.91-108
• /
• 1999

In our previous work using a motion analyzer and 3-dimensional sonic digitizer, the arm shapes for 23 women in their early twenties were classified into three characteristic types. In order to design sleeves, suitable for arm movements for the three characteristic arm shapes, a relationship between arm length variation and shoulder/elbow angles has been investigated for four cases of arm movements (flexion, extension, adduction and abduction). Each arm movement can be characterized by the changes in shoulder angle and the changes in elbow angle at the maximal shoulder angle. In all the four cases of arm movements, the changes of shoulder length and cap height are largest at the maximal shoulder angle. These changes were little affected by changes in elbow angle. The changes in the lower arm length and the difference between cap height and upper arm length are the largest at the maximal elbow angle of the maximal shoulder angle. There is a linear relationship between cap height and shoulder angle during arm movements; thus, in designing sleeves the cap height can be determined from the regression of cap height vs. shoulder angle.

• Journal of Plant Biology
• /
• 제37권4호
• /
• pp.397-402
• /
• 1994

Possible roles of polyamines in the inhibition of cell elongation in Ranunculus petioles were investigated. Exogenously apoplied polyamines greatly inhibited the auxin-induced petiole growth, while treatment of the tissue with $\alpha$-difluoromethylarginine, the inhibitor of putrescine biosynthesis, further enhanced the growth in the presence of IAA. Inhibitory effect of spermine can also be apparent for fusicoccin-induced elongation, but not for growth induced by a low pH. Spermine also suppressed the ethylene-enhanced growth in the presence of auxin. Using computer-based video digitizer system, the inhibitory effects of spermine on petiole growth were kinetically analyzed. Auxin-induced growth was characterized by an initial and transient growth with a highly elevated rate followed by a steady growth with a slightly reduced rate. Spermine treatment was found to shorten the duration of the initial phase of growth, and to reduce the rates of both the initial and steady growth as well. The latent period for auxin induction was not affected by spermine.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
• /
• pp.903-906
• /
• 1993

Lipreading through visual processing techniques help provide some useful systems for the hearing impaired to learn communication assistance. This paper proposes a method to understand spoken words by using visual images taken by a camera with a video-digitizer. The image is processed to obtain the contours of lip, which is approximated into a hexagon. The pattern lists, consisting of lengths and angles of hexagon, are compared and computed to get the fuzzy similarity between two lists. By similarity matching, the mouth shape is recognized as the one which has the pronounced voice. Some experiments, exemplified by recognition of the Japanese vowels, are given to show feasibilities of this method.

• Journal of Information Processing Systems
• /
• 제11권3호
• /
• pp.325-341
• /
• 2015

This paper describes the Tezpur University dataset of online handwritten Assamese characters. The online data acquisition process involves the capturing of data as the text is written on a digitizer with an electronic pen. A sensor picks up the pen-tip movements, as well as pen-up/pen-down switching. The dataset contains 8,235 isolated online handwritten Assamese characters. Preliminary results on the classification of online handwritten Assamese characters using the above dataset are presented in this paper. The use of the support vector machine classifier and the classification accuracy for three different feature vectors are explored in our research.

• 한국의학물리학회지:의학물리
• /
• 제3권1호
• /
• pp.63-69
• /
• 1992

최근 3차원적인 영상 데이타 및 방사선량 분포에 대한 정보를 필요로하는 뇌정위적 방사선 치료계획이 절실히 요구되고 있다. 본 연구의 목적은 personal computer를 이용하여 3차원적인 환자영상 데이터 및 선량분포를 함께 처리할 수 있는 치료계획 시스템을 개발하는 데 있다. 본 연구를 위한 처리 과정은 크게 3단계로 나누어 수행된다. 첫째, 환자영상 데이타 입력과정으로서, CT, MRI 등 단층촬영영상을 on-line 및 digitizer 방식을 통하여 personal computer에 입력시킨다 병소위치 및 모양도 Angio 및 CT localization 방법을 이용하여 함께 입력시킨다. 둘째, 선량계산 단계로서, stereotactic frame 좌표로 변환된 영상내에서 선량 분포를 계산하고 환자영상 데이타 및 치료기의 조사조건등에 따라 최적 선량분포를 얻는다. 셋째, display 과정으로서, 임의의 단층영상 및 재구성 영상내에서 환자영상과 방사선량에 대한 영상을 합성하여 computer monitor를 통하여 단일 영상내에 동시에 묘출할 수 있도록 처리한다. 본 연구의 치료계획 시스템을 응용한 바 치료계획을 신속하고 정확하게 처리할 수 있었으며, Angio, CT 혹은 MRI와 같은 여러형태의 영상내에서 선량분포를 동시에 묘출함으로써 능률적인 치료계획을 세울 수 있었다. 이와같은 치료계획의 자동화 시스템은 지금까지 어려웠던 3차원적인 뇌정위적 방사선치료계획을 가능케 하며, 추후 beam's eye view나 CT simulation을 통한 일반적인 3차원 방사선 치료계획에도 크게 이바지할 것으로 기대된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제21권1호
• /
• pp.35-39
• /
• 1998

We analyzed image factors to determine the characteristic factors that need for intelligent replenishment system of the auto film processor. We processed the serial 300 sheets of radiographic films of chest phantom without replenishment of developing and fixation replenisher. We took the digital data by using film digitizer which scaned the films and automatically summed up the pixel values of the films. We analyzed characteristic curves, average gradients and relative speeds of individual film using densitometer and step densitometry. We also evaluated the pH of developer, fixer, and washer fluid with digital pH meter. Fixer residual rate and washing effect were measured by densitometer using the reagent methods. There was no significant reduction of the digital density numbers of the serial films without replenishment of developer and fixer. The average gradients were gradually decreased by 0.02 and relative speeds were also gradually decreased by 6.96% relative to initial standard step-densitometric measurement. The pHs of developer and fixer were reflected the inactivation of each fluid. The fixer residual rates and washing effects after processing each 25 sheets of films were in the normal range. We suggest that the digital data are not reliable due to limitation of the hardware and software of the film digitizer. We conclude that average gradient and relative speed which mean the film's contrast and sensitivity respectively are reliable factors for determining the need for the replenishment of the auto film processor. We need more study of simpler equations and programming for more intelligent replenishment system of the auto film processor.

• 대한치과교정학회지
• /
• 제17권2호
• /
• pp.199-213
• /
• 1987

Upon analyzing the literature, it becomes apparent that norms for orthodontic diagnosis were from normal occlusion with pleasing face, and that the form and size of craniofacial skeleton were different between racial or ethnic groups. Therefore, this study was intended to establish Korean adult norms be useful for diagnosing the cases and to compare those to other ethnic or racial groups. Lateral cephalometric radiographs were taken of ninety-one Korean adults with normal occlusion showing pleasing face consisted in forty-three males and forty-eight females. The subjects ranged in age from seventeen to twenty-six years. The tracings involved measurements that were analyzed with a digitizer. The findings of this study can be summarized as follows, 1. Norms of Korean adult males, females, and combined sexes were established. 2 It was found that in the form and shape of craniofacial skeleton, there were no significant differences between males and females, but in the size males were larger than females 3. There were a great variation between ethnic or racial groups in the measurements of craniofacial skeleton 4 The size of Korean cranial base was smaller than the American Caucasian. 5 The maxilla and mandible of Korean were less protruded than those of the other ethnic groups 6 The dental pattern of Korean were more proclined than that of the American Caucasian and less protruded than that of the American Negro and the North Indian.

• 대한방사선기술학회지:방사선기술과학
• /
• 제22권1호
• /
• pp.61-66
• /
• 1999

The use of multileaf collimator(MLC) to replace conventional field-shaping techniques is not in itself expected to improve the local control of malignancy. The purpose for using MLCs in conventional radiation oncology is to improve the efficiency of treatment delivery. For effective clinical application of MLCs to shaped radiation field, field outline must be translated into MLC leaf position tables. The intended leaf positions contained in these tables must then be communicated to the control computer that drives the MLC. There are currently at least three techniques utilized by manufacturers of MLCs and treatment planning systems for doing this. The Varian series use a workstation employing a manual digitizer and light box especially. It has a third level MLC configuration and also has the option of placing the wedges above or below the block tray. The C language are used for development of software and three leaf coverage have been used for positioning MLC loaves at the nominal field boundary. The fit of the leaf shape to treatment target volumes are optimized by the rotation of the direction in leaf travel. The clinical application of this software are investigated for Varian MLCs used in linear accelerator of Yonsei Cancer Center. The advantage of the results with using this software is to prescribe and calculate exposed and blocked area in MLCs field.