• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.1
• /
• pp.37-52
• /
• 1990

In this study, the characteristics of cooling and rolling during strip casting process is obtained in comparison with the experimental and analytical results. The prupose of this study is to effectively analyze the thermal and mechanical deformation of roller applying the results of the heat transfer and the pressure distribution to boundary conditions. And then the relation between strip thickness and roll deformation is shown. The second purpose is to obtain the proper condition of the continuous casting for stainless steel. The summary and conclusions can be made on the basis of the results obtained by the theories and experiments. a) The strip casting condition for the fine surface quality of tin-alloy as-cast material was obtained in accordance with the velocity of roll rotation and initial roll gap. b) The experimental condition that the dimension of the cast strip thickness coincide with that of the initial roll gap was according to the experimental result of continuous casting by twin-roll type. c) The thermoelastic finite element model to calculate the roll deformation is represented. Thermoelastic model prediction for the roll deformation are in good agreement with the experimental results considering the thermal expansion of the roll. d) The higher cooling rates were obtained by a twin-roller quenching technique. Also quenched microstructure of the rapidly solidified shell was verified. e) The magnitude of roll deformation due to the thermal expansion and roll separating force is quantit- atively represented in the analysis of continuous casting for stainless steel.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.842-849
• /
• 2007

For a $CO_2$ two-stage twin rotary compressor used for heat pump water heater system, changes of $CO_2$ solubility in PAG oil were investigated along the gas passages from the first stage suction to final discharge. Only slight changes in solubility took place in suction chambers for both of the first and second stages, but for compression chambers, solubility variation ranged from 0.115 to 0.136, and from 0.133 to 0.182, respectively for the first and second stages. Calculation of gas flashing in parts of leakage oil flows and of oil contained in control volumes due to solubility changes was conducted and included in gas pressure calculation. For the second stage, gas flashing amounts to around $5%\sim6%$ for most leakage flows. Cooling capacity, compressor input, and COP obtained by calculation were well compared to the experimental results. Effects of operation speed on the compressor performance was also studied: as the shaft speed increased, adiabatic efficiency decreased rapidly due to increased over-compression loss.

• The Research Journal of the Costume Culture
• /
• v.19 no.5
• /
• pp.1009-1018
• /
• 2011

The purpose of this study was to develop slacks patterns for middle-aged abdomen-obese adult males by using the 3D virtual-twin and virtual-garment simulation system. The criteria for subjects in this study were males who had over $25kg/m^2$ of BMI, over 90cm of waist, and over 0.90 of WHR. A total of 211 adult males who met these criteria were enrolled. The results were as follows: first, a new slacks pattern considerate of abdomen-obese men was development. The basic numerical formula were as follows: front and back hip girth H/4+3.5, front waist girth W/4+1+0.5, back waist girth W/4+1-0.5, front crotch extension H/16, back crotch extension H/8-0.5, front pleats amount 2.7, and back dart amount 1.5. Second, according to the results of the new slacks patterns appearance evaluation, the new slacks pattern scored more highly than the existing pattern in silhouette and ease amount, confirming that the new slacks pattern is appropriate for the abdomen-obese men. Also, the new slacks pattern was evaluated allowing proper space length of waist, abdomen and hip. Virtual models of production through data from a 3D body scan, pattern draft and virtual garment digital program were applied to a prototypic design method in order to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.1
• /
• pp.19-27
• /
• 2007

Analytical investigation on the performance of a two stage twin rotary compressor for $CO_2$ heat pump water heater system has been carried out. A computer simulation program was made based on analytical models for gas compression in control volumes, leakages among neighboring volumes, and dynamics of moving elements of the compressor. Calculated cooling capacity, compressor input, and COP were well compared to those of experiments over the compressor speeds tested. For the operating condition of suction pressure of 3 MPa, and discharge pressure of 9 MPa, and compressor inlet temperature of $35^{\circ}C$, the compressor efficiency was calculated to be 80.2%: volumetric, adiabatic, and mechanical efficiencies were 88.3%, 93.2%, and 92.7%, respectively. For the present compressor model, volumetric and adiabatic efficiencies of the second stage cylinder were lower by about $6{\sim}7%$ than those of the first stage mainly due to the smaller discharge port at the second stage. Parametric study on the discharge port size showed that the compressor performance could be improved by 3.5% just by increasing the discharge port diameter by 20%.

• Fashion & Textile Research Journal
• /
• v.21 no.1
• /
• pp.59-66
• /
• 2019

The purpose of this study was to develop slacks pattern of elderly women aged over 60s by using the virtual twin and 3D virtual garment simulation system. The results were as follows; first, By using 3D Virtual Garment Simulation, new slacks pattern considered elderly women was development. The basic numerical formula were as follows, front waist girth W/4+2+1.5, back waist girth W/4+1.5+0.5, front hip girth H/4+0.75, back hip girth H/4+1.5, front crotch extension H/16-0.5, back crotch extension H/8-1.3, front dart amount 2 and back dart amount 1.5. Second, according to the results of the new slacks pattern's appearance evaluation, it estimated more highly than existing pattern in silhouette and ease amount, confirming that new slacks pattern is appropriate for the elderly women. Also, new slacks pattern was evaluated to allow proper space length of waist, abdomen and hip. Virtual models production through 3D body scan data, pattern draft and virtual garment digital program were applied to prototypic design method so as to enhance the fitness of ready-made garments. The use of the virtual twin made it impossible to comprehend the appearances and ease correspondent to motions. In order to evaluate wearing fitness, therefore, the system should be improved so as to change arm positions and perform various motions.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.08a
• /
• pp.72-82
• /
• 2004

The deformation mechanism of hexagonal close-packed materials is quite complicate including slips and twins. A deformation mechanism, which accounts for both slip and twinning, was investigated for polycrystalline hop materials. The model was developed in a finite element polycrystal model formulated with initial strain method where the stiffness matrix in FEM is based on the elastic modulus. We predicted numerically the texture of Mg alloy(AZ31B) sheet by using FEM based on crystal plasticity theory. Also, we introduced the recrystallized texture employed the maximum energy release theory after rolling. From the numerical study, it was clarified that the shrink twin could not be the main mechanism for shortening of c-axis, because the lattice rotation due to twin rejects fur c-axis to become parallel to ND(normal direction of plate). It was showed that the deformation texture with the pyramidal slip gives the ring type pole figure having hole in the center.

• Journal of the Korea Convergence Society
• /
• v.9 no.9
• /
• pp.199-207
• /
• 2018

This study aims to analyze Next Production Revolution (NPR) technologies through evidence-based keyword network in order to cope with the change of production paradigm called the Fourth Industrial Revolution (4IR). For the analysis, a total of 441 papers related to NPR or 4IR were extracted and the NPR technology network was constructed based on the simultaneous appearance relationship of the author keywords of these papers. Based on the NPR technology network, we explored key technologies through analysis of centrality and keyword group. As a result, technologies such as 'digital twin' and 'modeling and simulation', discovering insights by connecting the virtual and physical world in real time and reflecting them into design and process, are analyzed as key technologies.

• Journal of Digital Convergence
• /
• v.16 no.7
• /
• pp.55-62
• /
• 2018

American charter schools are independent public schools of choice, freed from rules but accountable for results. Charter schools have celebrated the 25th anniversary of its creation in 2017 and become part of landscape of public education in America. However, little research has been conducted on an individual charter school. This study aimed to examine the major factors of a successful charter school. A qualitative approach was employed. Seven one-hour in-depth interviews were conducted with semi-structured interview questions. And four teachers were participated. The conclusions are as follows: First, there is the combination of system and cultural factors as major successful factors of the Dayton Early College Academy. Second, system factors are the gateways and the advisory that is a twin at the charter school. The findings are considered to be applied for Korean educational settings and the implications can be used for policy development in Korea.

• Journal of Broadcast Engineering
• /
• v.26 no.4
• /
• pp.390-397
• /
• 2021

As digital twin technology is applied to various industrial fields, technologies to effectively process large amounts of data are required. In this paper, we discuss a customized service method for fast search and effective delivery of large-scale data for underground facility for public utilities management. The proposed schemes are divided into two ways: a fast search data generation method and a customized information service segmentation method to efficiently search and abbreviate vast amounts of data. In the high-speed search data generation, we discuss the configuration of the synchronization process for the time series analysis of the sensors collected in the underground facility and the additional information method according to the data reduction. In the user-customized service method, we define the types of users in normal and disaster situations, and discuss how to service them accordingly. Through this study, it is expected to be able to develop a systematic data generation and service model for the management of underground utilities that can effectively search and receive large-scale data in a disaster situation.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.127-140
• /
• 2022

With the recent development of the ICT (information and communication technology), the revolution of the industry has moved on from the third industry to the fourth. There is no doubt that the companies would not survive in the future without adopting these technologies. The purpose of this research is to analyze the intellectual structure of the internet of things(IoT) literature for the Industry 4.0 to suggest a better insight for the field. The data for this research is extracted from the Web of Science database. Total of 1,631 documents and 72,754 references are used for the research with the analysis program CiteSpace. Author co-citation analysis is used to analyze the intellectual structure and performed clustering, timeline and burst detection analysis. We identified 12 sub-areas of IoT for the Industry 4.0 which are 'Supply Chain', 'Digital Twin', 'Smart Manufacturing System' and etc. Through the timeline analysis we can find out which clusters will increase or decrease its reputation. As concluding remarks, limitations and further research suggestions are discussed.