• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.3
• /
• pp.418-424
• /
• 2014

A large number of wire rope has been used in various industries such as cranes and elevators. When wire used for a long time, wire defects occur such as disconnection and wear. It leads to an accident and damage to life and property. To prevent this accident, we proposed a wire rope fault detection system in this paper. We constructed the whole system choosing the leakage fault detection method using hall sensors and the method is simple and easy maintenance characteristics. Fault diagnosis and analysis were available through analog filter and amplification process. The amplified signal is transmitted to the computer through the data acquisition system. This signal could be obtained improved results through the digital filter process.

• Science of Emotion and Sensibility
• /
• v.8 no.3
• /
• pp.213-220
• /
• 2005

The purpose of this study is to develop a modular model of smart clothing which can integrate various digital devices in clothing, maintaining the inherent attribute of clothing. For achieving this purpose, several technological devices for the smart clothing for listening to music, bio-monitoring, and environment monitoring were developed, through multidisciplinary cooperation. As the result, total four design prototypes of smart sportswear(trekking wear, jogging wear) for the application of entertainment and health care were suggested.

• Journal of the Korean Society of Costume
• /
• v.61 no.8
• /
• pp.57-72
• /
• 2011

The purpose of this research is to develop a safe and convenient wearable technology wear for bikers. For this, we studied the current usage of two-wheeled vehicles and have also researched the rate of accidents and its causes. We then used them along with previous studies in terms of visual perception as factors to decide the crucial elements of the riders' apparel. Case studies and the break down for the established prototypes for bikers were practiced as well. Based on this process, a survey was conducted to find out the needs of the bikers in the areas of both apparel and technology and then proceeded to produce the appropriate design and device modules. In the apparel sector, the result of the survey indicated that it was considerable that any digital devices were not shown to sustain a natural visible look. It also was essential that the materials were durable and made for safety and easy movement. In the digital function sector, it was significant that a motion input interface which will be embedded into the wear was needed to avoid any dangerous situations. This would ensure the safety of not only the rider but the surrounding riders as well. Lastly, protecting the rider's skin from any harmful elements was regarded necessary as well. Based on these requirements, a new prototype was created and will be tested if the requirements stated above are all met and will be evaluated according to the effectiveness of its functions.

• Journal of Digital Convergence
• /
• v.17 no.8
• /
• pp.329-336
• /
• 2019

The purpose of this study is to analyze the differences of the lower back pain, fatigue, and Achilles tendon thickness according to wearing and not wearing high heels in order to understand symptoms of musculoskeletal diseases caused by wearing high heels in college students. lower extremity pain fatigue and achilles tendon thickness were measured in high heel wear group (n=19) and non high heels wear group (n=23). Participants' general characteristics and the lower extremity pain, fatigue, and Achilles tendon thickness were analyzed using mean, standard deviation. Differences in lower extremity pain, fatigue, and achilles tendon thickness were analyzed by independent t-test. The results showed that the difference between the participants' lower extremity pain (t=2.28, p=.028), right achilles tendon thickness (t=2.30, p=.027) and left achilles tendon thickness (t= 3.89, p<.001) The results of this study show that convergence approach can be applied as a basis for health problems in the structure and function of musculoskeletal disorders associated with wearing high heels. In the future, follow up observation according to the wearing of high heels in the same subject will be needed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.252-259
• /
• 2017

Purpose: The purpose of this study was to compare and analyze the wear of a prosthesis for 6 months after restoration with implant-supported fixed dental prosthesis made of either zirconia or gold. Materials and Methods: This study was conducted on patients requiring implant-supported fixed dental prostheses on first or second molar from January, 2015 to January, 2016. A total of 47 prostheses and antagonists were examined. Occlusal surface was recorded by impression of each prosthesis and antagonist 1 week and 6 months after prosthesis delivery. The digital files were created by impression scan. Occlusal shapes of 1 week and 6 months were compared and wear of prostheses and antagonists was analyzed. The Mann-Whitney test was used to analyzed the result data underwent normality test using SPSS (Version 23.0, IBM Corporation) Results: Mann-Whitney test revealed that there was no statistically significant difference in the median amount of mean vertical wear for 6 months in zirconia ($50.84{\mu}m$) and gold ($42.84{\mu}m$) prostheses (P > 0.05). When the opposing teeth were natural, the median amount of mean vertical wear of zirconia and gold prostheses was $47.72{\mu}m$ and $41.97{\mu}m$, respectively, and the median amount of mean vertical wear of enamel was $47.26{\mu}m$ and $44.59{\mu}m$, respectively. Statistical analysis showed no significant difference (P > 0.05). Conclusion: Despite the short study period and the small number of experimental groups, zirconia and gold showed no significant difference in wear during the first 6 months. Opposing natural enamel also showed no significant difference in the wear.

• Journal of Information Processing Systems
• /
• v.15 no.6
• /
• pp.1277-1295
• /
• 2019

With its technical development, digital printing is being universally introduced to the mass production of clothing factories. At the same time, many fashion platforms have been made for customers' participation using digital printing, and a tool is provided in platforms for customers to make designs. However, there is no sufficient solution in the production stage for automatically converting a customer's design into a file before printing other than designating a square area for the pattern designed by the customer. That is, if 30 different designs come in from customers for one shirt, designers have to do the work of reproducing the design on the clothing pattern in the same location and in the same angle, and this work requires a great deal of manpower. Therefore, it is necessary to develop a technology which can let the customer make the design and, at the same time, reflect it in the clothing pattern. This is defined in relation to the existing clothing pattern with digital printing. This study yields a clothing pattern for digital printing which reflects a customer's design in real time by matching the diagram area where a customer designs on a given clothing model and the area where a standard pattern reflects the customer's actual design information. Designers can substitute the complex mapping operation of programmers with a simple area-matching operation. As there is no limit to clothing designs, the variousfashion design creations of designers and the diverse customizing demands of customers can be satisfied at low cost with high efficiency. This is not restricted to T-shirts or eco-bags but can be applied to all woven wear, including men's, women's, and children's clothing, except knitwear.

• Journal of Korea Multimedia Society
• /
• v.19 no.5
• /
• pp.808-817
• /
• 2016

Recently, the wearable computing technology with bio-sensors has been rapidly developed and utilized in various areas such as personal health, care-giving for senior citizens who live alone, and sports activities. In particular, the wearable computing equipment to measure vital signs by means of digital yarns and bio sensors is noticeable. The wearable computing devices help users monitor and manage their health in their daily lives through the customized healthcare service. In this paper, we suggest a system for monitoring and analyzing vital signs utilizing smart healthcare clothing with bio-sensors. Vital signs that can be continuously acquired from the clothing is well-known as unstructured data. The amount of data is huge, and they are perceived as the big data. Vital sings are stored by Hadoop Distributed File System(HDFS), and one can build data warehouse for analyzing them in HDFS. We provide health monitoring system based on vital sings that are acquired by biosensors in smart healthcare clothing. We implemented a big data platform which provides health monitoring service to visualize and monitor clinical information and physical activities performed by the users.

• Journal of the Ergonomics Society of Korea
• /
• v.34 no.5
• /
• pp.531-540
• /
• 2015

Objective: The objective of this research is to investigate the fundamentals of human computer interaction for wearable computers and derive technology requirements. Background: A wearable computer can be worn anytime with the support of unrestricted communications and a variety of services which provide maximum capability of information use. Key challenges in developing such wearable computers are the level of comfort that users do not feel what they wear, and easy and intuitive user interface. The research presented in this paper examines user interfaces for wearable computers. Method: In this research, we have classified the wearable user interface technologies and analyzed the advantages and disadvantages from the user's point of view. Based on this analysis, we issued a user interface technology to conduct research and development for commercialization. Results: Technology requirements are drawn to make wearable computers commercialized. Conclusion: The user interface technology for wearable system must start from the understanding of the ergonomic aspects of the end user, because users wear the system on their body. Developers do not try to develop a state-of-the-art technology without the requirement analysis of the end users. If people do not use the technology, it can't survive in the market. Currently, there is no dominant wearable user interface in the world. So, this area might try a new challenge for the technology beyond the traditional interface paradigm through various approaches and attempts. Application: The findings in this study are expected to be used for designing user interface for wearable systems, such as digital clothes and fashion apparel.

• Journal of Fashion Business
• /
• v.12 no.3
• /
• pp.1-15
• /
• 2008

The purpose of this study is to analyze women's street fashion in Shenyang and to understand the regional design preference. The city, Shenyang is not only known as the one of three major northeastern province in China, but also known as the city where large numbers of Korean fashion companies have launched in. The observation focused mainly on young/young adults and missy in Oe Market and ZungJie(中街) which are the most busy streets in Shenyang. A digital camera or a camcorder were used to take photos of these women. In addition, video captures or photos were analyzed by three fashion experts. Finally, the photos were classified by item and data was coded for statistics and reviewed through frequency and percentage. As a result, it was found that most young women in Shenyang liked to wear a casual style such as easy t-shirt, denim pants or skirt and a feminine style such as a one-piece dress in summer. Top items that were favoured by young women in Shenyang were t-shirts and blouse types, while they favoured to wear denim pants of indigo blue for bottom items. Frequently found colors among these womens' clothing were white, black, vivid blue, red and red purple. I strongly believe this study will provide basic but significant information for the establishment of design and marketing strategies to the Korean fashion brands, who is trying to access Chinese fashion market.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.131-137
• /
• 2014

Purpose: This study examined the efficiency and wear of periodontal instrument sharpening using aluminum oxide stones with different levels of roughness. Materials and Methods: Thirty new No. 9-10 Gracey curets were used in this study. All curets had become dull after scaling and root planing. After similar blunting, the instruments were divided randomly into three groups (240, 600, 800 grit) containing 10 curets each. The stones were applied correctly to the lateral surface of each curet to maintain the $70-80^{\circ}$ angle. After resharpening, sharpness of the curets was examined by an optical microscope. After 20, 40, 60, and 80 strokes, the wear was measured at 1 mm and 2 mm from the tip of the cutting edge using a digital caliper. The data was analyzed statistically using analysis of variance (ANOVA) with repeated measures, 2-way ANOVA, and a Fisher's exact test. Results: The degree of sharpness increased significantly (P < 0.001) as the number of sharpening strokes grew for all stones. A comparison of the degree of sharpness on the same number of strokes showed that the 240 grit group significantly excelled the other groups on 5 and 10 strokes, respectively (P < 0.001). The mean wear showed no statistically significant difference among the groups (P > 0.05). Conclusion: The efficiency of Gracey curet resharpening was enhanced with more coarse stones, though we should consider the wear of the instrument during resharpening.