• Journal of Ocean Engineering and Technology
• /
• v.17 no.3 s.52
• /
• pp.13-20
• /
• 2003

This research aims at investigation of accuracy potential of RTK(Real-Time Kinematic) GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On The Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only $2\%$ was achieved. This indicates that the coastal mapping. As a result, it has been revealed that every possible noise in surveying could be corrected and the accuracy could be improved. The accuracy of GPS data acquired in real time was as good as that acquired by post processing. It is expected that it will be useful for the analysis of coastal geographic characteristics because DTM(Digital Terrain Model) can be also constructed for the harbor reclamation, the dredging, and the variation of soil movement in a river.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2013

This paper proposes a matching algorithm to find corresponding polygon feature sets between heterogeneous digital maps. The algorithm finds corresponding sets in terms of optimizing their shape similarities based on the assumption that the feature sets describing the same entities in the real world are represented in similar shapes. Then, by using a binary code, it is represented that a polygon feature is chosen for constituting a corresponding set or not. These codes are combined into a binary string as a candidate solution of the matching problem. Starting from initial candidate solutions, a genetic algorithm iteratively optimizes the candidate solutions until it meets a termination condition. Finally, it presents the solution with the highest similarity. The proposed method is applied for the topographical and cadastral maps of an urban region in Suwon, Korea to find corresponding polygon feature sets for block areas, and the results show its feasibility. The results were assessed with manual detection results, and showed overall accuracy of 0.946.

• Journal of the Korean earth science society
• /
• v.34 no.7
• /
• pp.605-614
• /
• 2013

Most steep slope failures tend to take place in geographically unstable areas. Mt. Baekdusan is known as a potentially active volcano in a typical mountainous terrain. This study prepared a digital elevation model of Mt. Baekdusan area and created a hazard map based on topographical factors and structural lineament analysis. Factors used in vulnerability analysis included geographical data involving aspect and slope distribution, as well as contributory area of upslope, tangential gradient curvature, profile gradient curvature, and the distribution of wetness index among the elements that comprise topography. In addition, the stability analysis was conducted based on the lineament intensity map. Concerning the disaster vulnerability of Mt. Baekdusan region, the south and south west area of Mt. Baekdusan has a highest risk of disaster (grade 4-5) while the risk level decreases in the north eastern region.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.338-340
• /
• 2014

The purpose of this research is to support decision making of emergency rescue system with GIS which selects landing point of emergency rescue for emergency situation on mountains and dropping point when landing is impossible. The area of research was limited to Pocheon-si, Gyeonggi-do. The results were divided into two values; landing point of helicopter on mountains and dropping point. Digital map, forest type map and forest soil map were utilized as fundamental data. Factors of landing point were slope, topographical characteristics, vegetation characteristics and area of helicopter landing point by helicopter data. And, for dropping point, slope and vegetation characteristics were divided as factors and GIS intersect function was utilized for the analysis. But, this research was conducted by excluding factor values of wind direction, wind velocity, etc. In the future, it's necessary to improve effectiveness of the analysis more by making a connection with Meteorological Agency DB.

• Journal of Korea Spatial Information System Society
• /
• v.5 no.1 s.9
• /
• pp.83-89
• /
• 2003

The GIS which is analysis of the real world to construction of 3D virtual city develop s in rapid growth. 3D virtual city is simulated by use of a GIS, Computer graphics, virtual reality and Spatial database. In this paper 3D topographical basemap which have the geographic coordinate of world was constructed by digital map. And build the Cyber city with combining the building that have elevation and 3D topographical basemap. By using server/client system for the cyber city. 3D cyber city web service implemented. We proposed the hybrid base web service method rather than the image or vector base web service. By the spatial and attribute search in the 3D Cyber City, overcome the existing simple visibility of Web 3D technology, and exhibited development direction to the Web 3D GIS.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.5
• /
• pp.67-77
• /
• 2007

The images of MODerate resolution Imaging Spectroradiometer (MODIS) that provide wider swath and shorter revisit frequency than Land Satellite (Landsat) and Satellite Pour I' Observation de la Terre (SPOT) has been used fer land cover classification with better spatial resolution than National Oceanic and Atmosphere Administration/Advanced Very High Resolution Radiometer (NOAA/AVHRR)'s images. Due to the advantages of MODIS, several researches have conducted, however the results for the land cover classification using MODIS images have less accuracy of classification in small areas because of low spatial resolution. In this study, uncertainty of paddy fields classification using MODIS images was conducted in the region of Gyeonggi-do and the relation between this uncertainty of estimating paddy fields and topographical factors was also explained. The accuracy of classified paddy fields was compared with the land cover map of Environmental Geographic Information System (EGIS) in 2001 classified using Landsat images. Uncertainty of paddy fields classification was analyzed about the elevation and slope from the 30m resolution Digital Elevation Model (DEM) provided in EGIS. As a result of paddy classification, user's accuracy was about 41.5% and producer's accuracy was 57.6%. About 59% extracted paddy fields represented over 50 uncertainty in one hundred scale and about 18% extracted paddy fields showed 100 uncertainty. It is considered that several land covers mixed in a MODIS pixel influenced on extracted results and most classified paddy fields were distributed through elevation I, II and slope A region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.241-251
• /
• 2006

This study analyzed the topographical characteristics by extracting property factors of stream (stream order, number of stream, stream length, mean stream length) and property factors of basin (basin area, basin length, total stream length, total number of stream, basin mean width, form factor, maximum stream order, basin density, stream frequency, relief ratio, mean elevation, mean, slope, maximum elevation) from DEM (digital elevation model) and stream network generated by 1:5,000 NGIS (national geographical information system) data for the Bukhan-river basin. In addition, topographical factors for upper, mid stream and lower stream were analyzed and the mutuality of the factors by linear and nonlinear regression curve was identified.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.6
• /
• pp.1164-1172
• /
• 2012

This study aims to make a "farmland use map" using high-resolution images and to analyze the land use change for about 8 years in Goyang, Namyangju, and Yongin cities. We have made a new numerical map named as a farmland use map using high-resolution images taken mostly in 2007 and digital topographical maps in Goyang, Namyangju, and Yongin cities near metropolitan areas to classify farmland use of paddy, upland, plastic film house, and orchard. We also made a land use map by overlaying the farmland use map and the land registration map of each city made in 2007, and compared the land use map made by RDA (Rural Development Administration) in 1999. Paddy areas decreased at a range of 3,000 to 5,000 ha during 8 years and were changed to residential areas in the cities. Upland and orchard areas also showed similar tendency and were changed to residential areas as well. On the other hand, the areas of the plastic film houses in the cities showed an increase or same in size. It is suggested that farmland use map can be broadly used as a base map for various survey projects including soil survey, statistics, and farmland information management.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.663-671
• /
• 2006

This study was performed for exploring the spatial distribution pattern of Pinus densiflora and Quercus spp. in Korea. Firstly, the spatial distribution map of Pinus densiflora and Quercus spp. was prepared in grid of $100m{\times}100m$ at national level, using digital forest type map and actual vegetation map. And thematic maps for topography, climate, and soil were also prepared in the raster form of $100m{\times}100m$. Through GIS based spatial analysis of the digital distribution map of Pinus densiflora and Quercus spp. and thematic maps, the spatial characteristics of Pinus densiflora and Quercus spp. distribution was explored in relation to the environmental factors such as topography, climate, and soil. And the occurrence frequency models of Pinus densiflora and Quercus spp. were derived. Pinus densiflora occurs more often than Quercus spp. at low elevation, low slope gradient, and high temperature areas. In addition, Pinus densiflora is mainly distributed at shallow and well-drained loamy soil from igneous rocks. In contrast, Quercus spp. is more common at shallow and well-drained loamy soil from metamorphic rocks. As a result, the prediction model for the spatial distribution of Pinus densiflora and Quercus spp. by topographical variables has proven successful with high statistical significance. The result of this study can contribute to rational management of Pinus densiflora and Quercus spp. stand in Korea, considering environmental factors such as topography, climate, and soil.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.119-134
• /
• 2019

In order to analyze the observational environment of solar radiation stations operated by the Korea Meteorological Administration (KMA), we used the digital elevation model (DEM) and the solar radiation model to calculate a topographical shading, sky view factor (SVF) and solar radiation by surrounding terrain. The sky line and SVF were calculated using high resolution DEM around 25 km of the solar stations. We analyzed the topographic effect by analyzing overlapped solar map with sky line. Particularly, Incheon station has low SVF whereas Cheongsong and Chupungryong station have high SVF. In order to validation the contribution of topographic effect, the solar radiation calculated using GWNU solar radiation model according to the sky line and SVF under the same meteorological conditions. As a result, direct, diffuse and global solar radiation were decreased by 12.0, 5.6, and 4.7% compared to plane surface on Cheongsong station. The 6 stations were decreased amount of mean daily solar radiation to the annual solar radiation. Among 42 stations, eight stations were analyzed as the urgent transfer stations or moving equipment quickly and more than half of stations (24) were required to review the observational environment. Since the DEM data do not include artifacts and vegetation around the station, the stations need a detail survey of observational environment.