• Journal of information and communication convergence engineering
• /
• 제9권6호
• /
• pp.733-737
• /
• 2011

This paper has studied subthreshold characteristics for double gate(DG) MOSFET using Gaussian function in solving Poisson's equation. Typical two dimensional analytical transport models have been presented for symmetrical Double Gate MOSFETs (DGMOSFETs). Subthreshold swing and threshold voltage are very important factors for digital devices because of determination of ON and OFF. In general, subthreshold swings have to be under 100mV/dec, and threshold voltage roll-off small in short channel devices. These models are used to obtain the change of subthreshold swings and threshold voltage for DGMOSFET according to channel doping profiles. Also subthreshold swings and threshold voltages have been analyzed for device parameters such as channel length, channel thickness and channel doping profiles.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.533-540
• /
• 2006

In recent years, civil-engineering work is desired the terrain information to be more efficient in earthwork volume calculation. One method for collecting elevation data is LiDAR. Lidar data was used to produce rapidly an accurate digital elevation model of the terrain, compared with the conventional ground surveys, photogrammetty, and remote sensing. Raw Lidar data is combined with GPS positional data to georeference the data sets. Lidar data is edited and processed to generate surface models, elevation models, and contours. Here we can either create a Tin Volume Surface or a Gird Volume Surface. Triangulated Irregular Network(TIN) has complex data structure, but it can describe well terrain surface features. As we have seen, we search the efficiency for earthwork volume calculation using Lidar data. One conclusion we can draw from this study is that Lidar data is more accurate result than digital map in the calculation of earthwork volume.

• 디지털융복합연구
• /
• 제6권2호
• /
• pp.65-76
• /
• 2008

Recently, software distribution method, along with advent of era of Web 2.0, is rapidly evolving from ASP(Application Service Provider) method into SaaS(Soft as a Service) method due to development in concepts and technologies including SOA(Service Oriented Architecture) Web Service, On Demand and Component. Determining factor in market competitiveness of newly emerging SaaS business model will be analyzed by focusing on Group-Wares, POS(Point of Sale) System, CRM(Customer Relationship Management) and ERP(Enterprise Resource Planning), which are the most representative SaaS business models in Korea. It is anticipated that the outcome of analysis of determining factors for market competitiveness for each of the main SaaS Business Models acquired through questionnaire survey can be utilized as important benchmarking material in setting the direction of cultivating SaaS market by the government as well as new entries into SaaS market.

• 감성과학
• /
• 제5권3호
• /
• pp.11-20
• /
• 2002

There are Two new models developed for objective evaluation of fabric color patterns by applying a multiple regression analysis and an adaptive foray-rule-based system. The physical features of fabric color patterns are extracted through digital image processing and the emotional features are collected based on the psychological experiments of Soen[3, 4]. The principle physical features are hue, saturation, intensity and the texture of color patterns. The emotional features arc represented thirteen pairs of adverse adjectives. The multiple regression analyses and the adaptive fuzzy system are used as a tool to analyze the relations between physical and emotional features. As a result, both of the proposed models show competent performance for the approximation and the similar linguistic interpretation to the Soen's psychological experiments.

• Journal of Korean Dental Science
• /
• 제2권2호
• /
• pp.18-23
• /
• 2009

Introduction : The purposes of this study were to analyze the differences between the anterior and posterior overjets using bracket slot points, and compare two methods of overjet calculation according to different reference points using clinical bracket points on three-dimensional digital models. Methods : A total of 35 normal occlusion models were scanned using a three-dimensional scanner (Orapix$^{(R)}$, Orapix Co., Ltd, Seoul, Korea) and then, virtual brackets (0.022" Slot MBT preadjusted brackets, 3 M Co.CA. USA) were placed on the digital models using virtual setup program (3Txer$^{(R)}$ ver. 1.9.6, Orapix co., Ltd). Archwire-like curves were designed to analyze labial and buccal overjet. Results : There were no statistically significance differences between the right and left overjet and between genders. The average overjet was found to be $1.67{\pm}0.85mm$ at the central incisor area, $2.16{\pm}0.88mm$ at the second premolar and $1.53{\pm}0.71mm$ at the first molar. Conclusion : It is recommended that overjet of individualized upper and lower arch to be 2.0mm at the anterior and posterior teeth.

• 디지털융복합연구
• /
• 제11권4호
• /
• pp.391-396
• /
• 2013

캐릭터 산업은 여타의 문화콘텐츠 산업과 같이 미디어라는 기술적 환경을 토대로 한다. 캐릭터의 생명력을 연장시키고 브랜드로서의 가치를 높이기 위해서는 보다 효율적인 미디어의 선택과 활용이 필요하다. 게임 캐릭터가 타 미디어 콘텐츠 보다 상품으로서의 가치가 떨어지는 이유를 분석하고 그 보완방법을 제시하고자 한다. 본 연구에서는 개발게임을 사례를 들어 게임 캐릭터의 브랜드를 높일 수 있는 방안을 제시하고 차후 게임캐릭터 수익모델 연계 방식을 제시하였다.

• 대한치과기공학회지
• /
• 제36권3호
• /
• pp.159-164
• /
• 2014

Purpose: The purpose of this study was analysis of quality of fixed prostheses fabricated by dental CAD/CAM system. Methods: The ten same cases of stone models were manufactured by dental scannable model, and stone models were scanned using the dental scanner for changing digital model. Ten digital models were completed. The design of zirconia core for zirconia based all-ceramic crown was conducted by the dental CAD program. The samples were fabricated using the pre-sintered zirconia block by dental milling machine. Marginal gaps were analyzed using by silicone replica technique at the eight parts for quality analysis of samples. One-way ANOVA was used for statistical analysis(${\alpha}=0.05$). Results: The mean for marginal gaps were $93.2{\sim}99.1{\mu}m$ at the eight parts. One-was ANOVA didn't show significant differences(p=0.089). Conclusion: The fixed dental prostheses fabricated by dental CAD/CAM were within clinically acceptable range.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.97-109
• /
• 2003

A large scale polygon models are often used to approximately represent 3D CAD models in Digital Engineering environment such as DMU (Digital Mockups) and network based collaborative design. However, they are not suitable for distribution on the network and for interactive rendering. We introduce a new coding system based on subdivision schemes called S-CODE system. In this system, it is possible to highly compress the model with sufficient accuracy and to view the model efficiently in a level of detail (LOD) fashion. The method is based on subdivision surface fitting by which a subdivision surface and curves which approximate a face of a CAD model are generated. We also apply a subdivision method to analytic surfaces such as conical and cylindrical surfaces. A prototype system is developed and used for evaluation with reasonably complicated data. The results show that the method is useful as a CAD data coding system.

• 한국인터넷방송통신학회논문지
• /
• 제13권2호
• /
• pp.83-92
• /
• 2013

소프트웨어 글로벌화란 다양한 나라 및 문화에 적합한 소프트웨어를 쉽게 체계적으로 개발할 수 있도록 지원하는 활동이다. 지금까지 소프트웨어 글로벌화를 위한 노력은 주로 소프트웨어 구현 기술 및 도구 개발에 초점을 맞추어왔다. 하지만 다른 나라 및 문화에 판매되는 글로벌 소프트웨어 제품은 다양한 환경 차이에 의해 요구사항이 다르게 되고, 이러한 요구사항의 차이는 상이한 아키텍처 설계를 유도하게 된다. 본 논문에서는 이러한 아키텍처 설계 지식을 체계화된 지식 모델로 정의하고, 이러한 지식 모델을 작성하고 이용하는 방법론을 제안한다. 또한 디지털 데이터 방송용 셋톱박스 미들웨어 시스템의 아키텍처 설계에 제안된 모델과 방법론을 적용하여 타당성을 평가한다.

• 전기학회논문지
• /
• 제56권2호
• /
• pp.240-247
• /
• 2007

This paper presents an implementation of the generator protective relay using Real Time Digital Simulator (RTDS) user defined component (UDC) model designed to facilitate the investigation and evaluation of protective relays. The UDC for RTDS is a convenient model that allows user to develop new component models and run them on the RTDS. The developed model has major features related to the development of six models such as distance, frequency, reverse power, volts per Hz, over voltage, and out-of-step relays. Also, the generator relay models have been used to support and enhance power engineering education at both the undergraduate and graduate levels. The developed model functions are verified and tested by both static test and dynamic test. The simulation results show the capabilities of the developed generator relay using RTDS UDC.