• Spatial Information Research
• /
• v.6 no.1
• /
• pp.103-120
• /
• 1998

"The Plan for the Development of the National Geographic Information System" designates the following six major thematic maps as the main subject of digital mapping project: topographic-cadastral maps; administrative boundary maps; land use maps; road network maps; national land zoning maps; and urban planning maps. Carrying out the digital mapping project requires standards and guidelines for digitizing process. However, there is neither standards nor guidelines with regard to thematic map production. This study describes the steps involved in producing thematic maps and provides the best procedural alternative for the production of thematic maps. Based on procedural alternative suggested by this study, actual digital maps have been experimentally produced for the selected area, Anyang-Si Dongan-Gu. The results of this experimental work have been utilized to government for not only making the guidelines but also initiating plans for the development of thematic map production.roduction.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.1
• /
• pp.43-48
• /
• 2008

In this study, it was estimated efficiency of GPS/INS photogrammetry by comparison of accuracy and economical efficiency between conventional aerial triangulation and GPS/INS aerial triangulation at the base of large scale digital mapping using GPS/INS aerial survey. The results of aerial triangulation with GPS/INS showed that 40% of working amount was reduced in the process of ground control point survey compared to conventional aerial triangulation. In case of 1/5000 scale aerial triangulation, the results showed that 55% GCP work was reduced in 10 and 20 block size, and 60% GCP work was reduced in 30 block size, under the assumption of keeping the same accuracy.

• Korean Journal of Computational Design and Engineering
• /
• v.19 no.3
• /
• pp.253-262
• /
• 2014

3D city model, which consisted of the 3D building models and their geospatial position and orientation, is becoming a valuable resource in virtual reality, navigation systems, civil engineering, etc. The purpose of this research is to propose the new framework to generate the 3D city model that satisfies visual and physical requirements in ground oriented simulation system. At the same time, the framework should meet the demand of the automatic creation and cost-effectiveness, which facilitates the usability of the proposed approach. To do that, I suggest the framework that leverages the mobile mapping system which automatically gathers high resolution images and supplement sensor information like position and direction of the image. And to resolve the problem from the sensor noise and a large number of the occlusions, the fusion of digital map data will be used. This paper describes the overall framework with major process and the recommended or demanded techniques for each processing step.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.63-70
• /
• 2006

This study aims to development of web-based process management system for spatial data construction. For developing this system work classification of basic surveying was standardized and quality management method for spatial data was established. Production process and work classification system for basic surveying such as control point surveying using GPS, leveling, aerial photographing, digital mapping, topographic mapping, digital elevation modeling, aerial photographic DB construction and digital orthophotomap was standardized. The status of the output and quality inspection for basic surveying project were analyzed, and the elements of quality inspection and data format for the type of outputs were analyzed. Based on standardized and analyzed contents, web-based process management system was developed after database and process was designed. The process management system consisted of process management, quality control, metadata management, and system management.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.63-70
• /
• 2019

Electric transmission towers are facilities to transport electrical power from a plant to an electrical substation. The towers are connected using wires considering the wire tension and the clearance from the ground or nearby objects. The wires are installed on a rights-of-way that is a strip of land used by electrical utilities to maintain the transmission line facilities. Trees and plants around transmission lines must be managed to keep the operation of these lines safe and reliable. This study proposed the use of a low-cost drone photogrammetry for the transmission line rights-of-way mapping. Aerial photogrammetry is carried out to generate a dense point cloud around the transmission lines from which a DSM (Digital Surface Model) and DTM (Digital Terrain Model) are created. The lines and nearby objects are separated using nDSM (normalized Digital Surface Model) and the noises are suppressed in the multiple image space for the geospatial analysis. The experimental result with drone images over two spans of transmission lines on a mountain area showed that the proposed method successfully generate the rights-of-way map with hazard nearby objects.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.4_2
• /
• pp.453-465
• /
• 2021

Recently, photogrammetry, TLS(Terrestrial Laser Scanner), MMS(Mobile Mapping System)-based techniques have been applied to estimate earthwork volume for construction management. The primary objective of this study is to analyze the accuracy of earthwork volume estimating between photogrammetry and TLS, MMS that improves the traditional surveying method in convenience, estimating accuracy. For this, the following research works are conducted sequentially; 1) literature review, 2) core algorithm analysis, 3) surveying data acquisition using photogrammetry, TLS, MMS, 4) estimated earthwork volume comparison according to surveying method. As a result of the experiment, it was analyzed that there were earthwork volume errors of 1,207.5m³ (14.03%) of UAV-based digital map, 391.5m³(4.55%) of UAV, TLS integrated digital map, and 294.9m³(3.43%) of UAV, MMS integrated digital map. It is expected that the result of this study will be enormous due to the availability of the analyzed data.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.1
• /
• pp.80-89
• /
• 2008

Mapping applications using satellite imagery have been possible to quantitative analysis since SPOT satellite with stereo image was launched. Especially, high resolution satellite imagery was efficiently used in the field of digital mapping for the areas which are difficult to produce large-scale maps by aerial photogrammetry or carry out ground control point surveying due to unaccessibility. This study extracted the geospatial information out of consideration for topographic characteristic from ortho imagery of the National Geospatial-intelligence Agency(NGA) in the United States of America and analyzed the accuracy of plane coordinate for ortho imagery. For this purpose, the accuracy according to topographic character by comparison between both extraction data from ortho imagery and the digital topographic maps of 1:5000 scale which were produced by Korea National Geographic Information Institute(NGI) was evaluated. It is expected that the results of this study will be fully used as basic information for ground control point acquisition or digital mapping in unaccessible area.

• Journal of Digital Convergence
• /
• v.10 no.8
• /
• pp.239-247
• /
• 2012

This paper is related to an Object VR-based virtual textile wearing system carrying out textile texture mapping based on viewpoint vector estimation and intensity difference map. The proposed system is characterized as capable of virtually wearing a new textile pattern selected by the user to the clothing shape section segmented from multi-view 2D images of clothes model for Object VR(Object Virtual Reality), and three-dimensionally viewing its virtual wearing appearance at multi-view points of the object. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern with holding the properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi-automatic processing possible to reduce the manual works.

• Archives of design research
• /
• v.13 no.1
• /
• pp.157-166
• /
• 2000

Since the cognitive science developed as a brandl of academic researdl, studies on human brains have flourished. Emotional features have been centered on the field of design, and the development of the design process has been diversified that makes use of the factors. The purpose of this study is to reflect the current trend and to convert the results into a method for designing. The researdl is based on the mind map techniques which spread like a trendy fashion, and tries to supply a theoretical explanation of how to overcome the fixed idea. Recognizing the importance of learned information in approaching a problem, I regarded the roles of left and right brain as analogue and digital images interpreting them by freely crossing language(digital images) and visual thought (analogue images), using mapping tedlniques. I pursued the research goal of the techniques focusing on the idea of using mapping. As a result of this. I established a logic system [figure 8] in that a proposition which starts as a problem introduction goes on until a problem solution, which is visualized with concept presentation, using a brainstorming technique. According to the suggested concept. I concluded that idea proliferation as a design demand can be solved by applying mapping techniques like one shown in figure 12.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.281-289
• /
• 1998

Korea is developing a Korea Multi-Purpose Satellite I (KOMPSAT-1) as one of Korea National Space Program, which will be launched in 1999. The EOC (Electro-Optical Camera) is the primary payload for KOMP-SAT-1. The main mission of EOC is to provide the images for the production of scale maps of Korean territory. This research is focused on methodology and possibility for the production of topographic maps using EOC sensor. Since the imagery from EOC is not yet available, SPOT Level 1A image data which are quite similar to those of EOC, and Intergraph Imagestation (Digital Photogrammetric Workstation) are implemented in the process of sample digital map generation. The sample digital maps generated from SPOT stereoimages were compared and analyzed with the existing 1:50,000 scale digital map produced by National Geography Institute. The feasibility and problem encountered in 1:50,000 scale digital mapping using SPOT stereoimages were presented. Based on results, the feasibility and further research areas for KOMPSAT-EOC in the line of 1:25,000 and 1;50,000 digital mapping were discussed.