• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.128-137
• /
• 2011

The purpose of the FAPIS(Forest Aerial Photograph Interpretation System) development is to increase accuracy and efficiency of the digital forest cover type mapping for improving conventional analog-based mapping procedures by optimizing work-flow and mapping technology. The database models including digital forest cover type map, aerial photograph, and topographic map were designed for use in this system construction. The interface configured concisely to connect with functions such as search engine, display control, conversion to stereo interpretation mode, modification tools, automation of print layout and database models. It is expected that the standardization methodology based on this system can be applied and extended in making all kinds of digital thematic maps, providing decision-making and information of forest resources.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.1
• /
• pp.111-121
• /
• 2018

RIn this research, digital elevation models, true-ortho image and 3-dimensional digital complied data was generated and evaluated using unmanned aircraft vehicle stereoscopic images by applying photogrammetric principles. In order to implement stereoscopic vision, digital Photogrammetric Workstation should be used necessarily. For conducting this, in this study GEOMAPPER 1.0 is used. That was developed by the Ministry of Trade, Industry and Energy. To realize stereoscopic vision using two overlapping images of the unmanned aerial vehicle, the interior and exterior orientation parameters should be calculated. Especially lens distortion of non-metric camera must be accurately compensated for stereoscope. In this work. photogrammetric orientation process was conducted using commercial Software, PhotoScan 1.4. Fixed wing KRobotics KD-2 was used for the acquisition of UAV images. True-ortho photo was generated and digital topographic map was partially produced. Finally, we presented error analysis on the generated digital complied map. As the results, it is confirmed that the production of digital terrain map with a scale 1:2,500~1:3,000 is available using stereoscope method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.299-309
• /
• 2014

This paper evaluated the possibility for 1/5,000 digital topographic mapping by using PLEIADES images of 0.5m GSD(Ground Sampling Distance) resolution that has recently launched. Those results of check points by applying the initial RPC(Rational Polynomial Coefficient) of PLEIADES images came out as; RMSE of those were $X={\pm}1.806m$, $Y={\pm}2.132m$, $Z={\pm}1.973m$. Also, if we corrected geometric correction using 16 GCP(Ground Control Point)s, the results of RMSE became $X={\pm}0.104m$, $Y={\pm}0.171m$, $Z={\pm}0.036m$, and t he RMSE of check points were $X={\pm}0.357m$, $Y={\pm}0.239m$, $Z={\pm}0.188m$; which of those results indicated the accuracy of standard adjustment complied in error tolerances of the 1/5,000 scale. Additionally, we converted coordinates of points, obtained by TerraSAR. for comparing with measurements from GPS(Global Positioning System) surveying. The RMSE of comparing converted and GPS points were $X={\pm}0.818m$, $Y={\pm}0.200m$, $Z={\pm}0.265m$, which confirmed the possibility for 1/5,000 digital topographic mapping with PLEIADES images and GCPs. As method of obtaining GCPs in unaccessible area, however, the outcome evaluation of GCPs extracted from TerraSAR images was not acceptable for 1/5,000 digital topographic mapping. Therefore, we considered that further researches are needed on applicability of GCPs extracted from TerraSAR images for future alternative method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.2
• /
• pp.52-63
• /
• 2021

In previous research, the coastal wetlands were detected by using the vegetation indices or land cover classification maps derived from the multispectral bands of the satellite or aerial imagery, and this approach caused the various limitations for detecting the coastal wetlands with high accuracy due to the difficulty of acquiring both land cover and topographic information by using the single remote sensing data. This research suggested the efficient methodology for detecting the coastal wetlands using the sentinel-2 satellite image and SRTM(Shuttle Radar Topography Mission) DEM (Digital Elevation Model) acquired in Gomsoman Bay, west coasts of South Korea through the following steps. First, the NDWI(Normalized Difference Water Index) image was generated using the green and near-infrared bands of the given Sentinel-2 satellite image. Then, the binary image that separating lands and waters was generated from the NDWI image based on the pixel intensity value 0.2 as the threshold and the other binary image that separating the upper sea level areas and the under sea level areas was generated from the SRTM DEM based on the pixel intensity value 0 as the threshold. Finally, the coastal wetland map was generated by overlaying analysis of these binary images. The generated coastal wetland map had the 94% overall accuracy. In addition, the other types of wetlands such as inland wetlands or mountain wetlands were not detected in the generated coastal wetland map, which means that the generated coastal wetland map can be used for the coastal wetland management tasks.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.119-132
• /
• 2010

In this study, 2-dimensional inundation analysis for Taehwa watershed in Ulsan metropolitan city was conducted to analyze flow behaviors, inundation depth and inundation stage, considering the building effect. Lidar having the interval of 1 m was employed to generate topographic data with 10m interval, and building data extracted from digital map was combined with the constructed topographic data for 2-dimensional inundation analysis. A few scenarios were constructed for the analysis to provide an effective and accurate inundation analysis method through analyzing the results. The disagreement based on the areas of inundation showed over 10% between the cases with and without consideration of building effect. The maximum inundation depth without considering the effects of buildings was 0.29m higher than that with considering the building effects. On the contrary, the maximum inundation stage with consideration of building effects was 0.49m higher than that without consideration of building effects.

• KCID journal
• /
• v.14 no.1
• /
• pp.80-88
• /
• 2007

The Shuttle Radar Topography Mission (SRTM) obtained elevation data on a near-global scale to generate the most complete high-resolution digital topographic database of Earth. SRTM consisted of a specially modified radar system that flew onboard the Space shuttle SRTM consisted of a specially modified radar system that flew onboard the Space Shuttle Endeavour during an 11-day mission on February 2000. Since 2004, in a GLCF (Global Land Cover Facility, http;//glcf.umiacs.umd.edu/) web-site, products of SRTM including 1Km and 90m resolutions for outside US and a 30m resolution for the US have been provided. This study is to assess the accuracy of SRTM-DEM in comparing with NGIS-DEM generated from NGIS digital topographic map(1:25,000) in Guem river watershed. For the Geum river watershed, SREM-DEM elevation ranged from 0 to 1,605m and NGIS-DEM ranged from 6 to 1,610m, and the average elevation of SRTM-DEM was 226.7m and 218.9m for NGIS-DEM, respectively. NGIS-DEM was subtracted from SRTM in three zones -Zone I (0~100m), Zone II (100~400m), Zone III (over 400m)- to estimate difference between SRTM and NGIS-DEM. As the results, the differences of these DEM were 5.2m (11.6%) in Zone I, 8.8m (3.8%) in Zone II, 12.5m (2.1%) in Zone III. Although there were differences between SRTM-DEM and NGIS-DEM, SREM-DEM would be possible to be utilized as DEM data for the region where DEM is not prepared.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.11 no.1
• /
• pp.14-22
• /
• 2008

The forest soil sediment disasters occurred in Jinbu-myeon Pyeongchang county were investigated characteristics by the aerial photograph analysis. After digitizing from aerial photographs, forest soil sediment disaster sites were classified into 695 collapsed sites, 305 flowed sites and 199 sediment sites. DEM (Digital Elevation Model) were generated from 1 : 5,000 digital topographic map. Factors of geography, hydrology, biology, and geology were analyzed using DEM, geologic map, and forest stand map with aerial photographs by GIS spatial analysis technique. The forest soil sediment disasters were mainly occurred from southeastern slope to southwestern slope. In collapsed sit es, the average slope degree is $28.9^{\circ}$, the average flow length is 163.5m, the average area of drainage basin is 897$m^2$. In case of flowed sites, the average slope degree, flow length, the area of drainage basin and confluence order is $27.0^{\circ}$, 175m, 2,500$m^2$ and 1, respectively. In sediment sites, the average slope, flow length, the area of drainage basin and confluence order is $12.5^{\circ}$, 2,50m, 25,000$m^2$ and 4, respectively. Also the forest soil sediment disasters were occurred most of collapsed sites in the afforest land after felling and igneous rocks composed of granite.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.1
• /
• pp.139-147
• /
• 2023

As heavy precipitation rates have increased due to climate change, the risk of landslides has also become greater. Studies in the field of disaster risk assessment predominantly focus on evaluating intrinsic importance represented by the use or role of facilities. This work, however, focused on evaluating risks according to the external conditions of facilities, which were presented via debris flow simulation. A random walk model (RWM) was partially improved and used for the debris flow simulation. The existing RWM algorithm contained the problem of the simulation results being overly concentrated on the maximum slope line. To improve the model, the center cell height was adjusted and the inertia application method was modified. Facility information was collected from a digital topographic map layer. The risk level of each object was evaluated by combining the simulation result and the digital topographic map layer. A risk assessment technique suitable for the polygon and polyline layers was applied, respectively. Finally, by combining the evaluated risk with the attribute table of the layer, a system was prepared that could create a list of objects expected to be damaged, derive various statistics, and express the risk of each facility on a map. In short, we used an easy-to-understand simulation algorithm and proposed a technique to express detailed risk information on a map. This work will aid in the user-friendly development of a debris flow risk assessment system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.2
• /
• pp.121-135
• /
• 2014

Object-based classification methods provide a valid alternative to traditional pixel-based methods. This study reports the results of an object-based classification to examine land cover in the demilitarized zones(DMZs) of Inje-gun. We used land cover classes(7 classes for main category and 13 classes for sub-category) selected from the criteria by Korea Ministry of Environment. The average and standard deviation of the spectrum values, and homogeneity of GLCM were chosen to map land cover types in an hierarchical approach using the nearest neighborhood method. We then identified the distributional characteristics of land cover by considering 3 topographic characteristics (altitude, slope gradient, distance from the Southern Limited Line(SLL)) within the DMZs. The results showed that scale 72, shape 0.2, color 0.8, compactness 0.5 and smoothness 0.5 were the optimum weight values while scale, shape and color were most influenced parameters in image segmentation. The forests (92%) were main land cover type in the DMZs; the grassland(5%), the urban area (2%) and the forests (broadleaf forest: 44%, mixed forest: 42%, coniferous forest: 6%) also occupied mostly in land cover classes for sub-category. The results also showed that facilities and roads had higher density within 2 km from the SLL, while paddy, field and bare land were distributed largely outside 6 km from the SLL. In addition, there was apparent distinction in land cover by topographic characteristics. The forest had higher density at above altitude 600m and above slope gradient $30^{\circ}$ while agriculture, bare land and grass land were distributed mainly at below altitude 600m and below slope gradient $30^{\circ}$.

• Spatial Information Research
• /
• v.17 no.2
• /
• pp.191-200
• /
• 2009

Aerial digital camera was used in outside since 2000 because of technical development & improvement of it. In korea, line type or frame type digital camera introduced since 2006 was used in manufacture and Correction of National base map appling the number and distribution of control point of analogue aerial triangulation from 2008. The main objective of the study is to compare and analyze the effects of the number and distribution of control points in accuracy of results, when we execute aerial triangulation with images from ADS40, line type sensored aerial digital camera available in korea. The result of RMSE can be concluded that accuracy of all the case are meet the aerial photograph surveying work regulation of NGI as to horizontal of control point ${\pm}0.068m$, ${\pm}0.073m$, ${\pm}0.071m$, height ${\pm}0.041m$, ${\pm}0.055m$, ${\pm}0.055m$, ${\pm}0.041m$, as to horizontal of check point ${\pm}0.167m$, ${\pm}0.113m$, ${\pm}0.110m$, height ${\pm}0.128m$, ${\pm}0.086m$, ${\pm}0.081m$. We have confirmed that it is possible to make out large scale digital topographic map.