• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.33 no.1
• /
• pp.45-52
• /
• 2015

The interoperability of multi-source data has become more important due to various digital maps, produced from public institutions and enterprises. In this study, the automatic matching algorithm of multi-source building data using hierarchical matching was proposed. At first, we divide digital maps into blocks and perform the primary geometric registration of buildings with the ICP algorithm. Then, corresponding building pairs were determined by evaluating the similarity of overlap area, and the matching threshold value of similarity was automatically derived by the Otsu binary thresholding. After the first matching, we extracted error matching candidates buildings which are similar with threshold value to conduct the secondary ICP matching and to make a matching decision using turning angle function analysis. For the evaluation, the proposed method was applied to representative public digital maps, road name address map and digital topographic map 2.0. As a result, the F measures of matching and non-matching buildings increased by 2% and 17%, respectively. Therefore, the proposed method is efficient for the matching of building polygons from multi-source digital maps.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.517-526
• /
• 2017

In this study, we analyzed the accuracy of elevation, slope, and area to the damage scale of the debris flow using the drones to track the details of the debris flow that method was between the digital topographical map(1/5,000) method and GPS ground survey method. The results are summarized as follows. At first, in the comparison of elevation, the value by the drones was 3.024m lower than the digital topography map, but in case of slope the average slope was $1.20^{\circ}$ and the maximum slope was $10.46^{\circ}$ which was higher by the drones image. Secondly, the difference area is $462m^2$ between on the digital topographic map and the drones image was calculated high, because it is determined by reflecting the uplift of the terrain as a point that calculated more accurate than the digital topographic map. Therefore, when compared with the existing method, the drone image method was very effective in terms of time and manpower.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.38 no.4
• /
• pp.345-352
• /
• 2020

To preserve and restore tidal flats and prevent safety accidents, it is necessary to construct tidal flat topographic information including the exact location and shape of tidal creeks. In the tidal flats where the field surveying is difficult to apply, airborne LiDAR surveying can provide accurate terrain data for a wide area. On the other hand, we can economically obtain relatively high-resolution data from UAV (Unmanned Aerial Vehicle) surveying. In this study, we proposed the methodology to generate high-resolution topographic information of tidal flats effectively by integrating airborne LiDAR and UAV point clouds. For the purpose, automatic ICP (Iterative Closest Points) registration between two different datasets was conducted and tidal creeks were extracted by applying CSF (Cloth Simulation Filtering) algorithm. Then, we integrated high-density UAV data for tidal creeks and airborne LiDAR data for flat grounds. DEM (Digital Elevation Model) and tidal flat area and depth were generated from the integrated data to construct high-resolution topographic information for large-scale tidal flat map creation. As a result, UAV data was registered without GCP (Ground Control Point), and integrated data including detailed topographic information of tidal creeks with a relatively small data size was generated.

• Journal of Cadastre & Land InformatiX
• /
• v.47 no.2
• /
• pp.135-144
• /
• 2017

The riverbed areas have exposed to various natural disasters and the private use by neighboring residents have caused many problems. The research objectives are to survey the actual situation of riverbed areas in order to prevent landscape damage and private use. Drone and photogrammetry, orthophoto, DSM(Digital Surface Model), digital topographic map and cadastral information have been integrated by GIS technology. The flood and disaster vulnerable area has been surveyed and the land use and private use has been analyzed using cadastral information. The research results show that the analyzed data can be used for providing foundation data for management of river and also can be used for surveying actual situation of private use on the riverbed areas.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.7 no.1
• /
• pp.52-61
• /
• 2004

Korea Water Resources Corporation carried out LiDAR survey to construct detailed terrain data for flood mapping and it is expected that much money is required in flood mapping of all over the country. Therefore, it is desirable to use NGIS digital map to construct preliminary modelling data for selection of flood mapping area. And the analysis of DEM error with respect to scale of digital map is necessary for the sake of applying digital map as the input data of flood mapping. We compared DEM from digital map with DEM from LiDAR survey. Especially we analyzed DEM error characteristics that is occurred with respect to the interpolation method that is used to construct DEM from TIN of digital map. As a result of analysis, digital map(1:1,000) showed smaller error than digital map(1:5,000) and DEM applying linear interpolation showed smaller error than DEM applying quintic interpolation. Especially, variation of DEM error by cell resolution was evaluated as very slight because urban district was composed of gentle slope.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.2
• /
• pp.91-97
• /
• 2019

In automatic map generalization, the formalization of cartographic principles is important. This study proposes and evaluates the selection method for road network generalization that analyzes existing maps using reverse engineering and formalizes the selection rules for the road network. Existing maps with a 1:5,000 scale and a 1:25,000 scale are compared, and the criteria for selection of the road network data and the relative importance of each network object are determined and analyzed using $T{\ddot{o}}pfer^{\prime}s$ Radical Law as well as the logistic regression model. The selection model derived from the analysis result is applied to the test data, and road network data for the 1:25,000 scale map are generated from the digital topographic map on a 1:5,000 scale. The selected road network is compared with the existing road network data on the 1:25,000 scale for a qualitative and quantitative evaluation. The result indicates that more than 80% of road objects are matched to existing data.

• Journal of Korean Society for Geospatial Information Science
• /
• v.6 no.2 s.12
• /
• pp.45-58
• /
• 1998

Digital photogrammetry is growing today using inexpensive personal confuter and digital image Processing technique instead of expensive analytical plotter in data acquisition from aerial photograph. Ortho photo in replacement of paper map is indispensable in the application of Geo-Spatial Information System and research activities about it are active in the domestic domain. Also the availability of ortho photo is greatly various in existing related fields using topographic map and expected to be used for new technology in near future. For this purpose, design of each module for ortho photo has been carried out with digital map and image. It was shown that the batch program for ortho photo generation developed in this study, could be used effectively as an effective data acquisition method for GSIS.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.4
• /
• pp.331-338
• /
• 2004

This paper describes capability of utilizing ground control points(GCPs) obtained from 1:1,000 and 1:5,000 digital vector maps to correct image coordinates which have errors due to bais rational polynomial coefficient(RPC) of IKONOS Geo-level stereo images. The accuracy of the bias-corrected images was improved to approximately 4m and 2m in planimetry and height, respectively. The accuracy was also compared with results from using GCPs obtained by GPS surveying. In consequence, bias-compensated IKONOS sereo imagery was evaluated to satisfy generating topographic map 1:10,000.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.81-91
• /
• 1999

The study on the updating of the database of Geo-Spatial Information System that is necessary condition to GSIS operation have executed actively. In this study, digital orthophotos were produced by using the product of digital photogrammetry process and then multiscale digital orthophoto maps were generated tv the concept of image pyramids. The produced digital orthophoto has 2.092 meters accuracy compared to 1:5,000 topographic map. This digital orthophoto can be implemented in various Geo-Spatial Information System, providing valuable spatial reference for other objects in the database.

• Journal of Korean Society of Forest Science
• /
• v.86 no.2
• /
• pp.241-250
• /
• 1997

The study was conducted to make a map for selecting righteous tree species for each site by digital terrain analysis. We set an algorithmic value for each tree species' characteristics with distribution pattern analysis, and the soil types were digitized from data indicated on soil map. Mean altitude, slope, aspect and micro-topography were estimated from the digital map for each block which had been calculated by regression equations with altitude. The results obtained from the study could be summarized as follows 1. We could develope a method to select righteous tree species for a given site with concern of soil, forest condition and topographic factors on Muju-Gun in Chonbuk province(2,500ha) by the terrain analysis and multi-variate digital map with a personal computer. 2. The brown forest soils were major soil types for the study area, and 29 tree species were occurred with Pinus densiflora as a dominant species. The differences in site condition and soil properties resulted in site quality differences for each tree species. 3. We tried to figure out the accuracy of a basic program(DTM.BAS) enterprised for this study with comparing the mean altitude and aspect calculated from the topographic terrain analysis map and those from surveyed data. The differences between the values were less than 5% which could be accepted as a statistically allowable value for altitude, as well as the values for aspect showed no differences between both the mean altitude and aspect. The result may indicate that the program can be used further in efficiency. 4. From the righteous-site selection map, the 2nd group(R, $B_1$) took the largest area with 46% followed by non-forest area (L) with 23%, the 5th group with 7% and the 4th group with 5%, respectively. The other groups occupied less than 6%. 5. We suggested four types of management tools by silvicultural tree species with considering soil type and topographic conditions.