• 한국정보처리학회논문지
• /
• 제4권9호
• /
• pp.2378-2390
• /
• 1997

본 논문에서는 ATM(Asynchronous Transfer Mode) 교환기에 E1급 HDSL(High-rate Digital Subscriber Lines) 정합 기능을 구현하였다. 26 게이지(0.4mm) 및 24 게이지(0.5mm) 페어 동 선로(copper telephone lines)로 구성되는 CSA(Carrier Serving Areas) 환경에서 누화(crosstalk), 임펄스, 전원 선로 잡음(power line noise) 및 longitudinal 같은 주요 전송 손실이 존재하는 기존 전화 가입자 선로 상에서 E1급 HDSL 데이터를 전송할 때 $10^{-7}$의 셀 손실 성능을 만족하는 가입자 서비스 루프 거리 및 셀 손실율을 평가하였다. 또한 ATM에서 HDSL을 이용한 MPEG-1급 주문형 비디오서비스, 영상 회의${\cdot}$서비스 및 고속 인터넷 서비스 기능을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(2)
• /
• pp.101-104
• /
• 2002

This paper propose that is algorithm of power dissipation reduction in the high level synthesis design for DSP(Digital Signal Processor), as the portable terminal system recently demand high power dissipation. This paper obtain effect of power dissipation reduction and switching activity that increase correlation of operands as input data of function unit. The algorithm search loop or repeatedly data to the input operands of function unit. That can be reduce the power dissipation using the new low power high level synthesis algorithm. In this Paper, scheduling operation search same nodes from input DFG(Data Flow Graph) with correlation coefficient of first input node and among nodes. Function units consist a multiplier, an adder and a register. The power estimation method is added switching activity for each bits of nodes. The power estimation have good efficient using proposed algorithm. This paper result obtain more Power reduction of fifty percents after using a new low power algorithm in a function unit as multiplier.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.601-606
• /
• 1986

In this paper, two methods of power circuit simulation is described in order to obtain the back data for design of current source inverter. One is steady-state analysis by differential equations during the various operating modes. Another method uses switching function, which represents the switching pattern of inverter, and direct-guadrature model of induction motor. The results of digital computer simulation by two methods are compared with the results of laboratory test.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 1998년도 학술발표회논문집
• /
• pp.162-165
• /
• 1998

A certain degree of energy saving can be possible by controlling the delay time of occupancy sensor. In this paper a control circuit is designed for automatic control of delay time setting appropriate to different situations using a digital counter, two latches and an adder. The delay time is controlled by adjusting the time constant of RC circuit through on-off control of switching devices according to adder output, which determines the base current level of switching devices. And from PSpice simulation it is verified to function properly.

• Journal of information and communication convergence engineering
• /
• 제8권4호
• /
• pp.421-426
• /
• 2010

This paper presents a method of design the counter using sequential system based on synchronous techniques. For the design the counter, first of all, we derive switching algebras and their operations. Also, we obtain the next-state functions, flip-flop excitations and their input functions from the flip-flop. Then, we propose the algorithm which is a method of implementation of the synchronous sequential digital logic circuits. Finally, we apply proposed the sequential logic based on synchronous techniques to counter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.336-339
• /
• 1990

This paper discusses the application of VSCS(Variable Structure Control System) to position control of a trapezoidal type brushless DC motor. In order to simplify the overall control system and to improve the robustness, a new switching function which is composed of linear combination of only measurable state variables Sr(x) and Sr(x) is defined. The proposed new switching function is implemented using a digital signal processor(DSP). A general PWM amplifier is replaced by an ON-OFF pattern generator for the hardware simplification and digitalization. Experimental results are given to demonstrate the validity of the proposed control method.

• 한국해양공학회지
• /
• 제20권6호
• /
• pp.18-23
• /
• 2006

This paper introduces the results of the development of a new mobile digital DC-arc welding machine (DDWM). A simple PI controller is applied to the DDWM to control the output welding current that is tracking the constant setting current. Furthermore, a hot-start function, an anti-stuck function, a standby mode and an intelligential circuit breaker (ICB) are included in the DDWM. The DDWM increases welding quality and saves more power energy than a conventional welding machine. The DDWM is changed from ready mode into the standby mode, automatically, after 2-minute intervals from this unload start. Then, the DDWM is changed into ready mode, automatically, since it is reused for welding. Moreover, the DDWM increases welding quality, productivity and reduces costs of welding. So, the DDWM can make a considerable contribution to the mobile welding industries. The effectiveness of the DDWM was proven by the experimental results.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2006년도 전기학술대회논문집
• /
• pp.71-72
• /
• 2006

This paper introduces the results of the development of a new mobile Digital DC-arc Welding Machine (DDWM). A simple PI controller is applied to the DDWM to control the output welding current tracking the constant setting current. Furthermore, a hot-start function, an anti-stuck function, a standby mode and an intelligential circuit breaker (ICB) are included in the DDWM. The DDWM increases welding quality and saves more power energy than a conventional welding machine. Because the DDWM is changed from ready mode into the standby mode automatically after 2 minutes interval from this unload start. Then the DDWM is changed into ready mode automatically since it is reused to weld. Mover, the DDWM increases welding qualify, productivity and reduces costs of welding. So, the DDWM can have a great of contribution to the mobile welding industries. The effectiveness of the DDWM was proven by the experimental results and durable test.

• 구강회복응용과학지
• /
• 제31권1호
• /
• pp.33-44
• /
• 2015

목적: 본 연구는 platform matching, platform switching을 시행한 임플란트의 변연골 소실을 비교하여 platform switching 개념의 임상적 의의를 평가하고자 한다. 연구 재료 및 방법: 원광대학교 치과병원 임플란트 센터에서 치료를 진행한 환자를 대상으로 임플란트 식립 시기, 직경, 길이, 지대주 연결방법 및 보철물 연결고정 유무를 조사하였다. 변연골 소실량을 측정하기 위해서 Emago advanced v5.6 프로그램을 사용하여 임플란트 식립 시와 가장 최근 내원 시의 치근단 방사선 사진을 비교하였다. 결과: 환자 82명의 임플란트 150개를 대상으로 6 - 63개월 동안 관찰한 결과 platform matching 임플란트는 $1.16{\pm}0.54mm$, platform switching 임플란트는 $0.68{\pm}0.27mm$의 변연골 소실을 나타내었다. 결론: Platform switching을 시행함으로써 임플란트의 변연골 소실을 줄이는 효과가 있는 것으로 사료된다.

• 한국인터넷방송통신학회논문지
• /
• 제16권5호
• /
• pp.63-68
• /
• 2016

오디오 믹서(audio mixer)는 다수의 오디오 신호의 믹싱을 수행하는 전자장치이다, DSP기술과 IT기술의 발전으로 다양한 기능과 확장성을 가진 디지털 믹서가 시장에 보급되고 있다. 그러나 디지털믹서는 제어를 SW를 통해 수행하기 때문에 디지털 오류 또는 소프트웨어 오류에 대해 기존 아날로그 믹서에 비해 안정성에서 매우 취약하다. 본 논문에서는 이러한 문제점에 대응하기 위해 다채널 디지털 아날로그 하이브리드 믹서 구조와 디지털믹서 기능 고장감지 메커니즘과 고장절체 기술을 제안하고 디지털-아날로그 이중화 구조를 가진 오디오 믹서를 개발하였다. 실험결과 전원상실을 제외한 디지털 믹서의 고장을 120ms내에 감지하고 자동으로 아날로그 믹서 모드로 전환하여 믹서 기능 상실 없이 끊임없는 방송 기능을 제공하였다.