• 한국인쇄학회지
• /
• 제14권2호
• /
• pp.37-49
• /
• 1996

The practical lith developer is a hydroquinone solution of moderate alkalinity and low free-sulfite ion concentration with potassium bromide as the restraining agent. In the study on composition of ilth developer to promote high sensitivity, high contrast and long term preservation or use, a new composition of lith developer, namely PK lith developer, was developed and of was found that PK lith developer was superior to the lith developer which was commercially available in terms of contrast, speed and preservation. This paper also describes studies on the addition of hdydrazine to PK lith developer, which have led to further improvements in the system.

• 산업경영시스템학회지
• /
• 제6권8호
• /
• pp.21-26
• /
• 1983

It is necessary to measure all the size and contours of the human figures to design all the materials for the human natures. So this study is provided to develop new method on the measurements of human contour (Athromet) using image Process techniques which would be more simple and accurate then the other known methods. T.V. cameras, quantizer, micro computer and printer are utilized to this study. The author had acknowledged that this process provides the accurate and speedy results from the vast majority of data compare to the formerly developed methods.

• 감성과학
• /
• 제13권1호
• /
• pp.1-10
• /
• 2010

본 연구는 복합기의 제품-사용자간 인터페이스를 설계함에 있어서 UI 디자이너가 어떤 프로세스와 방법론으로 접근해야 사용자 심성모형을 고려한 인터페이스 설계가 가능한지를 실제 양산 모델의 적용을 통해 알아보았다. 제품-사용자간 인터페이스를 디자인하는 UI 디자이너에게 큰 관심사는 어떻게 하면 제품의 시스템 이미지를 사용자 자신의 심성모형과 근접하게 설계하여 혼동 없이 제품을 사용하게 할 것인가에 있다. 이때, 디자이너가 의도하는 개념모형과 사용자가 인지하고 있는 심성모형이 일치하면 제품을 사용하는 사용자는 어려움 없이 쉽게 제품을 사용할 수 있을 것이다. 이러한 사용자 중심의 제품-사용자간 인터페이스를 개발하기 위해서는 사용자의 올바른 이해와 사용자의 사용 행태 및 사용 습관에 대한 제대로 된 관찰이 기본적으로 선행되어야 한다. 그럼에도 불구하고 많은 사업 영역에서 사용자 심성모형을 제대로 고려하지 않고 UI 디자이너의 추측으로 설계된 인터페이스가 디자인되어 UI 디자이너의 생각, 의도와는 전혀 다른 사용자의 반응이 일어나는 사례를 여러 차례 목격해 왔다. 이에 본 연구에서는 복합기의 기본 기능에 대해 사용자 심성모형에 위배되는 부적절한 시스템 이미지 사례를 추출하였고, 시스템 이미지와 사용자의 심성모형에 대한 관계를 도식화하여 기본 가설을 세웠다. 이때 세워진 가설을 기반으로 국내외 사용성 평가를 실시하였고, 평가를 통해 도출 되었던 사용성 문제점들을 기반으로 두 개의 개선안을 제안하여 그 중 한 개를 차기 양산 제품에 적용하였다. 결론적으로 본 연구를 통해 어떻게 하면 UI 디자이너가 사용자의 심성모형에 근접한 시스템 이미지를 구축할 수 있는지를 고찰할 수 있었다.

• 대한치과기공학회지
• /
• 제43권2호
• /
• pp.48-55
• /
• 2021

Purpose: This study aimed to analyze deformation according to post-curing of complete arch artificial teeth for temporary dentures printed with a digital light processing (DLP) printer. Methods: An edentulous model was prepared and an occlusal rim was produced. The edentulous model and occlusal rim were scanned using a model scanner. A complete denture was designed using a dental computer-aided design, and the denture base and artificial tooth were separated. Ten complete arch artificial teeth were printed using a 3D printer (DLP). Complete arch artificial teeth was classified into the following three groups: a group no post-curing (NC), a group with 10 minutes post-curing (10M), and a group with 20 minutes post-curing (20M). Specimens were scanned using a model scanner. The scanned data were overlapped with the reference data. Statistical analysis was performed using one-way ANOVA analysis of variance, Kruskal-Wallis test, and Mann-Whitney U test (α=0.05). Results: Regarding the overall deviation of complete arch artificial teeth, the NC group showed the lowest mean deviation of 111.13 ㎛ and the 20M group showed the highest mean deviation of 131.03 ㎛. There were statistically significant differences among the three groups (p<0.05). Conclusion: The complete arch artificial tooth showed deformation due to post-curing. In addition, the largest shrinkage deformation was observed at 10 minutes of post-curing, whereas the least deformation was observed at 20 minutes.

• 대한치과기공학회지
• /
• 제45권1호
• /
• pp.1-7
• /
• 2023

Purpose: To evaluate the marginal and internal fit of metal coping fabricated by a metal three-dimensional (3D) printer that uses selective laser melting (SLM). Methods: An extraoral scanner was used to scan a die of the prepared maxillary right first molar, and the coping was designed using computer-aided design software and saved as an stereo lithography (STL) file. Ten specimens were printed with an SLM-type metal 3D printer (SLM group), and 10 more specimens were fabricated by casting the castable patterns output generated by a digital light processing-type resin 3D printer (casting the 3D printed resin patterns [CRP] group). The fit was measured using the silicon replica technique, and 8 points (A to H) were set per specimen to measure the marginal (points A, H) and internal (points B~G) gaps. The differences among the groups were compared using the Mann-Whitney U-test (α=0.05). Results: The mean of marginal fit in the SLM group was 69.67±18.04 ㎛, while in the CRP group was 117.10±41.95 ㎛. The internal fit of the SLM group was 95.18±41.20 ㎛, and that of the CRP group was 86.35±32 ㎛. As a result of statistical analysis, there was a significant difference in marginal fit between the SLM and CRP groups (p<0.05); however, there was no significant difference in internal fit between the SLM group and the CRP group (p>0.05). Conclusion: The marginal and internal fit of SLM is within the clinically acceptable range, and it seems to be applicable in terms of fit.

• 한국정밀공학회지
• /
• 제31권6호
• /
• pp.497-504
• /
• 2014

The digital signage display is actively researched as the next generation of large FPD. To commercialize those digital signage display, the manufacturing cost must be downed with printing method instead of conventional photolithography. Here, we demonstrate a reverse offset printed TFT electrodes for the digital signage display. For the fabricated source/drain and gate electrode, we used Ag ink, silicone blanket, Clich$\acute{e}$ and reverse offset printer. We printed uniform TFT electrode patterns with narrow line width(10 ${\mu}m$ range) and thin thickness(nm range). In the end the printing source/drain and gate electrode are successfully achieved by optimization of experimental conditions such as Clich$\acute{e}$ surface treatment, ink coating process, delay time, off/set process and curing temperature. Also, we checked that the printing align accuracy was within 5 ${\mu}m$.

• 대한치과기공학회지
• /
• 제43권1호
• /
• pp.13-18
• /
• 2021

Purpose: This study aimed to compare the flexural properties and perform the Weibull analysis of photo-curing three-dimensional (3D) printing resin. Methods: Photo-curing temporary resin (3D polymer) was used as a printing resin. Specimens (65 × 10 × 3.3 ㎣) were prepared following the ISO 20975-1 guidelines and according to the different printing orientations using a digital light processing 3D printer (D2 120; Dentium). The flexural strength (FS), flexural modulus, and work of fracture (WOF) were measured using a universal testing machine (Instron 3344; Instron) at a crosshead speed of 5 mm/min. Results: In this study, the 0° orientation exhibited higher FS and WOF than the 45° orientation. Significant differences were found among the printing orientations (p<0.05). Specimens printed at the 0° orientation were the most accurate. In the Weibull analysis, 0° showed the greatest Weibull modulus (m), which represents a higher reliability. Conclusion: 3D printing should be selected and used by considering flexural properties, size accuracy, and reliability.

• 청정기술
• /
• 제7권3호
• /
• pp.169-178
• /
• 2001

섬유염색은 전 세계적으로 매우 큰 시장이나, 염료를 사용하여 섬유염색을 수행하는 기존 인쇄 공정의 경우 염료의 손실 및 환경오염의 문제점을 갖고 있다. 기존 공정들의 경우 섬유 인쇄 시 전처리 및 후처리 공정이 필요하고 이들 공정에서 폐수가 발생하게 된다. 이런 문제점들의 해결방안으로 전처리 및 후처리 공정이 필요없고 잉크를 효율적으로 사용할 수 있는 잉크제트 프린팅 기법을 섬유염색 기술에 적용하려는 노력이 진행중이다. 섬유인쇄를 위해 잉크제트 프린터를 사용할 경우 안료를 사용하기 때문에 잉크는 액체 상에 고체입자가 분산되어 있는 서스펜션 상태로 존재한다. 분자역학 모사 기법과 유사한 Stokesian 역학 모사 방법을 사용한 전산모사를 통해 외부에서 가해진 압력구배에 의해 노즐 관에 흐르는 분산잉크 중의 입자 분포 및 속도 분포 변화를 살펴보았다. 전산모사결과 입자의 부피분율이 낮을수록, 평균 무차원 서스펜션 속도가 낮을수록, 노즐 관과 입자 크기 사이의 비(H/a)가 클수록 입자들의 분포가 상당히 균일한 것으로 나타났다. 따라서 잉크제트 프린팅 기법을 사용하여 섬유인쇄를 수행하는 경우, 노즐 관에의 유속을 작게 하고 노즐 관과 입자 사이의 크기 비를 크게 해야 균일한 인쇄 성능을 얻을 수 있을 것으로 판단된다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제39권2호
• /
• pp.257-262
• /
• 2016

본 연구는 3차원 프린터를 이용한 보청기 이어 쉘 제작기법에서 보청기 이어 쉘 제작에 필요한 모델링 구조를 DICOM(Digital Imaging and Communication in Medicine) 영상에 의한 새로운 방법으로 제시하고자 하였다. 실험방법은 DICOM 볼륨 영상에서 임계치 값을 이용한 3차원 외이도를 추출하여 3차원 프린터가 인식할 수 있는 표준 형식의 STL(STereoLithography) 파일로 모델링 표면구조를 비교하였다. 이러한 3차원 모델링은 기존의 귓본 제작 후 3차원 스캐너에 의한 인접한 등치선 사이를 3차원 표면조각들로 채워 모델링 구조를 표현한 방법들로서 본 연구에서도 DICOM 영상에 의한 삼각형 표면구조를 동일하게 만들 수 있었다. 이는 DICOM 영상에 의한 모델링 표면구조가 기존 3차원 프린터가 인식할 수 있는 동일한 환경을 제공해 최종적으로 보청기 이어 쉘 형상을 출력 할 수 있음을 나타냈다.

• 대한치과기공학회지
• /
• 제43권3호
• /
• pp.77-83
• /
• 2021

Purpose: The purpose of this in vitro study was to measure and compare the thickness-dependent color dimensions of digital light processing (DLP) three-dimensional (3D) printer and conventional interim restorative resin. Methods: Specimens (N=60) were fabricated using either subtractive manufacturing (S group) or DLP 3D printing (D group) material. All milled and 3D-printed specimens were allocated into three different groups (n=10) according to different thicknesses as follows: 1.0, 1.5, and 2.0 mm. Color measurements in the CIELab coordinates were made using a spectrophotometer under room light conditions (1,003 lux). The color differences (𝚫E^*) between the specimen and control target data were calculated. Data were analyzed using the oneway analysis of variance (ANOVA). Post hoc comparisons were conducted using Tukey's honestly significant difference method (α=0.05 for all tests). Results: The 𝚫L^*, 𝚫a^*, 𝚫b^*, and 𝚫E^* values of interim restorative resin produced by DLP 3D printing were obtained in terms of the specimen's thickness increased compared with the increases by subtractive manufacturing. When the thickness was similar, the color difference between subtractive manufacturing and DLP 3D printing was ≥5.5, which is a value required by the dentist for remanufacturing. Conclusion: Color was influenced by the thickness of the interim restorative resin produced by DLP 3D printing.