• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1066-1070
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. Thus, this paper proposes auto tune PID by fuzzy logic controller based on FPGA which to achieve real time and small size circuit board. The digital PID controller design to consist of analog to digital converter which use chip TDA8763AM/3 (10 bit high-speed low power ADC), digital to analog converter which use two chip DAC08 (8 bit digital to analog converters) and fuzzy logic tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. The fuzzy logic tune digital PID was designed by look up table (LUT) method which data storage into ROM refer from trial and error process. The digital PID processor verified behavior by the application program ModelSimXE. The result of simulation when input is units step and vary controller gain ($K_p$, $K_i$ and $K_d$) are similarity with theory of PID and maximum execution time is 150 ns/action at frequency are 30 MHz. The fuzzy logic tune digital PID controller based on FPGA was verified by control model of level control system which can control level into model are correctly and rapidly. Finally, this design use small size circuit board and very faster than computer and microcontroller.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.981-986
• /
• 1992

In order to implement the digital PID control algorithm, it is necessary to consider the effect of the finite word length(FWL). In this paper, we show the FWL effect in the digital PID controllers. The conception analyse the effects of the signal quantization error in the digital PID algorithm and the coefficient wordlength determined from performance criteria with the statistical wordlength concept. Throughout this paper, it is dealt with the type of controller structure based delta operator the delta operator has such advantages are superior rounfoff noise perfoff noise performance, more accurate coefficient repersentation, and less sensitive control law.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.2
• /
• pp.318-329
• /
• 1994

This paper deals with the finite wordlength effect on the performance of digital PID controllers. The finite wordlength, one of the major limitation factors in digital controllers, results on two kinds of quantization error : the signal quantization error and the coefficient quantization error. This paper derives the variance of the plant output due to the signal quantization error. Using stability margins as performance criterion, the statistical wordlength concept is adopted for coefficient wordlength selection. Finally, the experimental results exhibit satisfactory performance of the digital PID controller with statistical coefficient wordlength.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.109-109
• /
• 2000

In process industries, more than 90% of the control loops have PID controller. Futhermore, the most control systems are using classical PID controllers for their process control. Various auto-tuning methods of PID gains using relay-feedback are presented recently. In order to get the desired control performance, the correct tuning of PID controller is very important. This paper suggests how to tune of digital PID gains using information for both the Nyquist critical point by conventional method and another point by the relay feedback and hidden time-delay term. Simulation results show that the proposed controller has better performance than the conventional method.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.06a
• /
• pp.314-320
• /
• 2005

In this paper, a methodology for estimating the parameters of a discrete-time system and designing a digital PID controller based on the estimated model and a genetic algorithm is presented. To deal with optimization problems occurring regarding parameter estimation and controller design, a pseudo parallel genetic algorithm (PPGA) is used. The parameters of a discrete-time system are estimated using both the model technique and a PPGA. The digital PID controller is described by the pulse transfer function and its parameters are tuned based on both the model reference technique and another PPGA. A set of experimental works on two processes are carried out to illustrate the performance of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.311-316
• /
• 1991

This paper deals with designing the PID autotuner. The system parameters are identified using the relay control, where the unidirectional relay with hysteresis is adopted. The digital PID tuning rule on Nyquist plot is derived, and the statistical wordlength is adopted for the coefficient wordlength. The experimental results of temperature control exhibit the satisfactory performance and the validity of the derived statistical wordlength.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.12
• /
• pp.69-77
• /
• 1999

This paper describes the design of fuzzy digital PID controller using simplified indirect inference method. First, the fuzzy digital PID controller is derived from the conventional continuous time linear digital PID controller. Then the fuzzification, control-rule base, and defuzzification using SIM in the design of the fuzzy digital controller are discussed in detail. The resulting controller is a discrete time fuzzy version of the conventional digital PID controller, which has the same linear structure, but are nonlinear functions of the input signals. The proposed controller enhances the self-tuning control capability, particularly when the process to be controlled is nonlinear. When the SIM is applied, the fuzzy inference results can be calculated with splitting fuzzy variables into each action component and are determined as the functional form of corresponding variables. So the proposed method has the capability of the high speed inference and adapting with increasing the number of the fuzzy input variables easily. Computer simulation results have demonstrated the superior to the control performance of the one proposed by D. Misir et al.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1012-1015
• /
• 2003

Recently technologies have created new principle and theory but the PID control system remains its popularity as the PID controller contains simple structure, including maintenance and parameter adjustment being so simple. The adjust parameter of PID to achieve best response of process which be using time and may be error if user are not expert. Nowadays this problem was solved by develop PID controller which can analysis and auto tune parameter are appropriate with process which used principle of Ziegler ? Nichols but it are expensive and designed for each task. Thus, this paper proposes auto tune PID based on FPGA by use principle of Dahlin which maximum overshoot not over 5 percentages and do not fine tuning again. It have performance in control process are neighboring controller in industrial and simple to use. Especially, It can use various process and low price. The auto tune digital PID processor embedded on chip FPGA XC2S50-5tq-144. The digital PID processor was designed by fundamental PID equation which architectures including multiplier, adder, subtracter and some other logic gate. It was verified by control model of temperature control system.

• Journal of Power Electronics
• /
• v.17 no.3
• /
• pp.686-694
• /
• 2017

Due to the wide use of electronic products, digitally controlled DC-DC converters are attracting more and more attention in recent years. However, digital control strategies may introduce undesirable Limit Cycle Oscillation (LCO) due to quantization effects in the Analog-to-Digital Converter (ADC) and Digital Pulse Width Modulator (DPWM). This results in decreases in the quality of the output voltage and the efficiency of the system. Meanwhile, even if the resolution of the DPWM is finer than that of the ADC, LCO may still exist due to improper parameters of the digital compensator. In order to discover how LCO is generated, the state space averaging model is applied to derive equilibrium equations of a digital PID controlled DC-DC converter in this paper. Furthermore, the influences of the parameters of the digital PID compensator, and the resolutions of the ADC and DPWM on LCO are studied in detail. The amplitude together with the period of LCO as well as the corresponding PID parameters are obtained. Finally, MATLAB/Simulink simulations and FPGA verifications are carried out and no-LCO conditions are obtained.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.3
• /
• pp.131-137
• /
• 1996

The existing digital governors are in the beginning stage. Placing the focus on the marine site, most of the digital governors developed are still using the simple PID algorithm. But, the performance of a diesel engine is widely changed according to the parameters of the PID controller. So, this article describes a new method to adjust the parameters of the PID controller in a marine digital governor. In this paper, the diesel engine is considered as a nonoscillatory second order system. A new method to adjust the parameters of the PID controller for speed control of a diesel engine is proposed by means of the model matching method. Also, the simulations by numerical methods are carried out in cases of the exact understanding or out of the parameters of a diesel engine respectively. And this paper confirms that the proposed new method here is superior to Ziegler & Nichols's method through the comparisons and analysis of the characteristics of indicial responses.