• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.30 no.3
• /
• pp.182-188
• /
• 1994

In recent years, navigational and fisheries instruments are rapidly advancing. Especially data processing. data transferring and data interchange throughout the digital signals has been in high progress. Even though the ship's heading is also provided by a gyro-compass, an electro-magnetic compass studying by us currently is easy to issue adequate data to instruments requiring the information for the ship's heading. especially in small fishing boats. As the main element of the electro-magnetic compass is a three-axis magnetic sensors, the developing of the high performance sensor is in highly necessity in the beginning. This paper describes on the development of electro-magnetic compass of three-axis fixed type by using three-axis detection new type magnetic sensor without gimbals. even though usual electro-magnetic compass have to need necessarily a gimbal system in order to keep horizontal condition of the compass.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.321-329
• /
• 2006

The ultimate target cf this study is to develop ship's Digital Compass that can substitute for conventional ship's Magnetic Compass. At first, a new Digital Compass system consisting of three-axis Flux-gate sensors and small sized step motor was developed Then, new deviation adjustment theory incorporating with Kalman filter method was proposed through which automatic deviation analysis and correction are obtainable without ship's swinging procedures. The effectiveness of developed Digital Compass and proposed deviation adjustment theory are verified throughout the performance evaluation tests on the training ship 'SAE-NU-RI'.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.77-85
• /
• 2006

The last target of this study is to develop ship's Digital Compass that can be substitute with conventional ship's Magnetic Compass. At first, new Digital Compass system was developed with three-axis high accuracy Flux-gate sensors and small sized step motor. Then after, new deviation correction theory without ship's swinging procedures was proposed to provide automatic deviation analysis, correction and renewal. Throughout the performance evaluation tests on the training ship 'SAE-NU-RI', the effectiveness of developed Digital Compass and proposed deviation correction theory are verified.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.08a
• /
• pp.29-36
• /
• 2004

The paper describes recent experimental results on the development of Digital Magnetic Compass (DMC), which can provide smart automatic correction functions to the magnetic interferences. The design methodology of magnetic sensing circuit with ring-core fluxgate sensor is represented. The performance results of the sensing circuits are discussed with error analysis by polynomial regressions. As test results, the sensing circuit filtered only the second harmonic signal that is proportional to the direction of earth's magnetic field, and it leads to the obtainment of bearing information. In addition, the total residual errors of DMC can be analyzed by the adoption of polynomial regressions. It shown that the possibility of high precise DMC, in the future.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.506-510
• /
• 2007

Digital Magnetic Compass(DMC) has a robust feature against interference in the indoor environment better than compass which is easily disturbed by electromagnetic sources or large ferromagnetic structures. Ultrasonic Sensors are cheap and can give relatively accurate range readings. So they ate used in Simultaneous Localization and Mapping(SLAM). In this paper, we study the Simultaneous Localization and Mapping(SLAM) of mobile robot in the indoor environment with Digital Magnetic Compass and Ultrasonic Sensors. Autonomous mobile robot is aware of robot's moving direction and position by the restricted data. Also robot must localize as quickly as possible. And in the moving of the mobile robot, the mobile robot must acquire a map of its environment. As application for the Simultaneous Localization and Mapping(SLAM) on the autonomous mobile robot system, robot can find the localization and the mapping and can solve the Kid Napping situation for itself. Especially, in the Kid Napping situation, autonomous mobile robot use Ultrasonic sensors and Digital Magnetic Compass(DMC)'s data for moving. The robot is aware of accurate location By using Digital Magnetic Compass(DMC).

• Journal of Navigation and Port Research
• /
• v.36 no.9
• /
• pp.699-706
• /
• 2012

This paper describes Declination interpolation method in the application of Digital Magnetic Compass(DMC) with small capacity memory for relatively low-priced system. The purpose of this study is to find accurate declination values using Declination Lookup Table(DLT) and Secular Variation Table(SVT) with the Bilinear interpolation method having four points data only. World Magnetic Model with Gauss coefficients produced by NOAA is used in the calculation of DLT and SVT at desired years. To verify the applicability of the proposed method, the simulation tests and the error analysis are carried out in this work. As results from tests, the interpolation error is within 0.01 degree that is much enough to implement high accurate DMC comparing with commercial DMCs on the market. In summary, the declination interpolation method, proposed in this study, can be useful in the application of DMC.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.37-40
• /
• 2007

Digital Magnetic Compass(DMC)는 실내의 전자기적 요소나 강한 자성체 건물구조에서는 쉽게 방해를 받던 Compass보다 실내에서 간섭에 강한 특징을 가지고 있다. 그리고 적외선 센서와 초음파 센서는 서로 물체와의 거리를 보완적으로 계산해 줄뿐만 아니라 값싼 센서로서 경제적인 이점을 가지고 있어 Simultaneous Localization and Mapping(SLAM)에서 많이 사용하고 있다. 본 논문에서는 자율 이동 로봇의 구동에서 Digital Magnetic Compass(DMC)와 Ultrasonic Sensors을 이용한 SLAM의 구현에 대해 연구하였다. 로봇의 특성상 한정된 Sensing 데이터만으로 방향과 위치를 파악하고 그 데이터 값으로 가능한 빠르게 Localization을 하여야 한다. 그러므로 자율 이동 로봇에서의 SLAM 적용함으로 Localization 구현과 Mapping을 수행하고 SLAM 구현상의 주된 연구 중의 하나인 Kid Napping 문제에 중점을 두고 연구한다. 특히, Localization 구현을 수행을 위한 데이터의 Sensing 방법으로 적외선 센서와 초음파 센서를 같이 사용하였고 비슷한 위치의 데이터 값이 주어지거나 사전 정보 없는 상태에서는 로봇의 상태를 파악하기 위해서 DMC을 같이 사용하여 더 정확한 위치를 측정에 활용하였다.

• Proceedings of KOSOMES biannual meeting
• /
• 2006.11a
• /
• pp.137-141
• /
• 2006

To consider the practical use of a ship's Digital Compass in earth's magnetic field high accurate Deviation and 얘 nation are required to obtain ship's true bearing. Variation can be obtain with World Magnetic Model (WMM) using the Earth's spherical harmonic model of the main field and of the secular variation at any location around the earth. Deviation can be obtain with deviation analysis and synthesis method based on the Poisson equations. As results of deviation and variation corrections to the Digital Compass, high accurate true bearing is obtained. This experiments are carried out during in the navigation of training ship 'SAE-NU-RI'.

• Journal of the Korean Institute of Navigation
• /
• v.10 no.1
• /
• pp.81-100
• /
• 1986

Self-contained portable remote-indicating magnetic compass was designed and tested. Its sensing part consists of main scale disk of rotary encoder with photo-etched 180, oopaque slits and three pairs of light sources and detectors seperated by a transparent index scale, so that any angular deflection of main scale disk against the bowl may be detected optically. The outputs from the sensing part are transformed into digital ship's course indication by electronics unit which consists of operational amplifier, phase discriminator, up-down counter and counting starter circuit. The results from testign the above compass with turntable at variable rate of turn are as following : 1) The main scale disk deflection against the bowl can be detected without any disturbing influence to the freedom of its north-seeking function. 2) The digital indication resolution is found to be $\circ \pm$1 degree. 3) Misrepresenting indication can be avoided by ensuring dimension uniformity and arrangement accuracy of slits on main and index scale disks and by centering pivot in the encoder disk. 4) Indication resolution should be improved by modifying the signal processing and by doubling the number of slits on compass card. 5) Further study should be made on developing non-conductive compass liquid, analogue repeater driving system and more compact processing element.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.168-172
• /
• 2005

An autopilot system of a ship is very important for a safe and convenient navigation, which is realized with getting an azimuth data from a gyrocompass, a magnetic compass and a GPS(Global Positioning System) compass. Magnetic compass an azimuth error is generated by a vessel magnetism material such as steels. The magnetic pole is detected by the magnetic field sensor, it does not coincide with the true north, therefore, the detected azimuth data can not but accompany error. In this paper, in order to detect the minimum change of azimuth data which generates errors of azimuth information, a search algorithm using the Kalman Filtering method is utilized. The digital electronic compass is designed with the integration algorithm using the merits of an earth's magnetic field sensor and a GPS receiver.