• 한국콘텐츠학회논문지
• /
• 제11권8호
• /
• pp.68-76
• /
• 2011

최근 소비자의 화질에 대한 높은 관심으로 관련 시장 경쟁력이 가열되었으며, 이에 따라 제조사는 고객만족을 위한 제품을 개발하는 방향으로 진보하고 있다. 그러나 제품의 객관적 성능 향상이 실제 소비자가 인지하는 화질의 선호도에 항상 긍정적인 영향을 미친다고 단정하기 어렵다. 또한 선행연구를 통해 객관적 성능 평가 방법과 주관적 화질 평가 결과 간의 상관관계를 찾기 어려웠다. 그러므로 객관적 화질 재현 성능이 이미지 선호도에 미치는 영향을 파악하여 감상자가 선호하는 화질에 대해 분석할 필요가 있다. 따라서 본 논문에서는 객관적 화질 평가 요소들을 측정하고 이러한 수치들이 이미지 선호도와 어떠한 관계를 갖고 있는지 분석하고자 하였다. 이와 같은 연구를 위해 ISO에서 규정하고 있는 화질 평가 방법을 사용하여 이미지의 선호도를 측정하였으며 이러한 결과가 객관적 화질 평가 요소들과 어떠한 상관관계를 갖고 있는지 통계적으로 분석하였다. 이와 같은 결과는 화질을 향상시키는 요소를 분석할 수 있으며 단순한 고화질 추구를 위한 성능 개발뿐만 아니라 감상자가 선호하는 화질을 파악하여 개발에 도움이 될 수 있는 실질적인 연구로 기대된다.

• 치과방사선
• /
• 제27권1호
• /
• pp.87-97
• /
• 1997

The purpose of this study was to evaluate the method for quantitative assessment of bone mass from aluminum-equivalent value of hydroxyapatite by using digital imaging system consisted of Power Macintosh 7200/120, 15-inch color monitor, and GT-9000 scanner with transparency unit. After aluminum-equivalent image made from correlation between aluminum thickness and grey scale, the accuracy of conversion to mass from aluminum-equivalent value was evaluated. Measured bone mass was compared with converted bone mass from aluminum-equivalent value of hydroxyapatite block by correlation formula between aluminum-equivalent value of hydroxyapatite block and hydroxyapatite mass. The results of this study were as follow; 1. Correlation between aluminum thickness and grey level for obtaining aluminum-equivalent image was high positively associated(r²=0.99). Converted masses from aluminum-equivalent value were very similar to measured masses. There was, statistically, no significant difference(P<0.05) between them 2. Correlation between hydroxyapatite aluminum-equivalent and hydroxyapatite mass was shown to linear relation (r²=0.95). 3. Converted masses from aluminum-equivalent value of 3 dry mandible segments were similar to measured masses. The difference between the exposure directions was not significantly different(P<0.05).

• 한국인터넷방송통신학회논문지
• /
• 제12권6호
• /
• pp.99-104
• /
• 2012

디지털 사진 영상 방송 등의 정보에 디지털 신호를 삽입하여 저작권을 주장하는 방안으로 워터마킹 알고리즘을 들수 있다. 본 논문에서는 R code와 워터마킹 알고리즘을 적용하는 방법을 제안하였다. 디지털 영상의 DCT 계수의 위치에 따라 QR 코드를 삽입하는 워터마킹 알고리즘을 제안하였다. 본 알고리즘은 디지털영상에 들어 있는 QR 코드를 부호화하여 워터마킹 과정을 통하여 각 명암성분의 DCT 영역에 적용하였다. 본 연구를 통하여 워터마킹 과정을 수행한 압축된 영상과 원 영상의 사이의 평균 PSNR값이 33.99dB가 측정되어 화질을 유지함을 알게되었다. 또한 정규화 상관도 NC가 99.51 이상의 높은 값을 측정하게 되었다

• 디지털콘텐츠학회 논문지
• /
• 제17권6호
• /
• pp.593-601
• /
• 2016

본 논문은 휘도 성분 영상으로부터 컬러 성분 영상들을 추정 부호화함으로써 높은 압축률을 달성할 수 있는 영역 기반 스펙트럴 상관 추정 부호화 방법에 관한 것이다. 제안된 방법은 3단계로 구성되어 있다. 우선, 정규 색차합 영상과 휘도 영상을 이용해 산출한 Y/C 비트 평면합 영상을 대상으로 영상 분할을 수행하여 영역들의 형상 정보를 추출한다. 이후, 각 영역 단위로 휘도 영상과 R, B 영상 간의 근사화 자승 오차가 최소가 되도록 하는 비례 인자와 가감 인자를 산출한다. 최종적으로, 각 영역의 비례 인자와 가감 인자를 비트스트림으로 부호화한다. 컴퓨터 시뮬레이션 결과에 따르면, 제안된 방법은 동일한 PSNR에서 두 칼라 성분 영상을 부호화하기 위해 소요되는 bpp를 비교할 때, JPEG/베이스라인 혹은 JEPG2000/EBCOT 알고리즘에 비해 2배 혹은 3배 이상의 압축률을 제공한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.688-694
• /
• 2002

As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG(Speckle Strain/Displacement Gage), ESP(Electronic Speckle Photography) and its 3-dimension version SDSP are investigated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.47-54
• /
• 2003

As a tool for strain measurement to work with screw driven or hydraulic material test systems, in which mechanical vibration is inherent, SSDG (Speckle Strain/Displacement Gage), ESP (Electronic Speckle Photography) and its 3-dimension version SDSP are evaluated for the theory and practical appliance. Through tension test of steel strips, their validity and shortcomings are examined. As the results, it has been shown that, although SSDG and ESP provide direct measurement of in-plane strain in one direction, they are so sensitive to the out-plane displacement. On the other hand, SDSP which is aided with DIC (Digital Image Correlation) technique to trace the movement of the speckles provides not only in-plane 2-dimensional displacement field, but also out-of-plane displacement simultaneously. However, because the DIC is time-consuming, not automated yet and it needs post-processing to evaluate strain from the displacement field, SDSP appears to be not adequate as a real time sensor.

• 한국자동차공학회논문집
• /
• 제6권4호
• /
• pp.219-227
• /
• 1998

This paper describes the fuel spray characteristics of gasoline port injectors such as the breakup procedures of liquid fuel, breakup and extinction behaviors of fuel spray at nozzle tip, time history of SMD and velocity distribution of fuel spray in the direction of fuel stream. Pintle-type gasoline fuel injector was used to analyze mentioned spray characteristics. In order to visualize the fuel spray behaviors and to measure the droplet mean diameter and velocities of spray droplets, the Schlieren method, digital image processing and auto-correlation PIV were applied in this study. In addition, the spray characteristics according to the variation of time were considered. The results of fuel spray show that the liquid sheet breakup starts at 10mm downstream actively. The flying time is approximately 4msec between 50mm and 80mm down the nozzle tip. Also, SMD of fuel spray, the number of droplets and fuel velocity distribution at each point of downstream are discussed.

• 대한기계학회논문집B
• /
• 제34권3호
• /
• pp.309-316
• /
• 2010

본 연구에서는 입자의 크기 및 3차원 속도를 측정할 수 있는 디지털 업자 홀로그래피 시스템을 개발하고, 개발된 시스템의 효용성을 검증하기 위하여 층류 채널 유동장에 적용하여 보았다. 디지털 홀로그램을 기록할 수 있는 이중 펄스 홀로그래피 시스템을 구축하였고, 상관계수법을 이용한 초점면 결정, Wiener 필터를 사용한 잡음 제거, 두 개의 이진화값 및 분할 이진화방법 등을 사용하여 기록된 홀로그램 및 재생이미지를 처리하였으며, 동일 입자의 추적은 입자가 액적처럼 큰 경우는 일치확률법을, 유동장의 추적 입자처럼 작은 경우는 상호상관법을 사용하였다. 개발된 시스템을 사용하여 층류 채널 유동의 축방향 속도를 측정하였으며, 이론적 예측식과 비교하여, 디지털 입자 홀로그래피 시스템의 유용성을 확인하였다.

• 치과방사선
• /
• 제22권2호
• /
• pp.273-282
• /
• 1992

The purpose of this study was to propose the utility which was evaluated the digital image processing and clinical application of the videodensitomery. The experiments were performed with IBM-PC/16bit-AT compatible, video camera(CCdtr55, Sony Co., Japan), an color monitor(MultiSync 3D, NEC, Japan) providing the resolution of 512×480 and 64 levels of gray. Sylvia Image Capture Board for the ADC(analog to digital converter) was used, composed of digitized image from digital signal and the radiographic density was measured by 256 level of gray. The periapical radiograph(Ektaspeed EP-21, Kodak Co., U. S. A) which was radiographed dried human mandible by exposure condition of 70 kVp and 48 impulses, was used for primary X-ray detector. And them evaluated for digitzed image by low and high pass filtering, correlations between aluminum equivalent values and the thickness of aluminum step wedge, aluminum equivalent values of sound enamel, dentin, and alveolar bone, the range of diffuse density for gray level ranging from 0 to 255. The obtained results were as follows: 1. The edge between aluminum steps of digitized image were somewhat blurred by low pass filtering, but edge enhancement could be resulted by high pass filtering. Expecially, edge enhancement between distal root of lower left 2nd molar and alveolar lamina dura was observed. 2. The correlation between aluminum equivalent values and the thickness of aluminum step wedge was intimated, yielding the coefficient of correlation r=0.9997(p<0.00l), the regression line was described by Y=0.9699X+0.456, and coefficient of variation amounting to 1.5%. 3. The aluminum equivalent values of sound enamel, dentin, and alvolar bone were 15.41㎜, 12.48㎜, 10.35㎜, respectively. 4. The range of diffuse density for gray level ranging from 0 to 255 was wider enough than that of photodenstiometer to be within the range of 1-4.9.

• 한국통신학회논문지
• /
• 제28권1C호
• /
• pp.24-31
• /
• 2003

In this paper, a new opto-digital multiple information hiding and real-time extracting system is implemented. That is, multiple information is hidden in a cover image by using the stego keys which are generated by combined use of random sequence(RS) and Hadamard matrix(HM) and these hidden information is extracted in real-time by using a new optical correlator-based extraction system. In the experiment, 3 kinds of information, English alphabet of "N", "R", "L" having 512$\times$512 pixels, are formulated 8$\times$8 blocks and each of these information is multiplied with the corresponding stego keys having 64$\times$64 pixels one by one. And then, by adding these modulated data to a cover image of "Lena"having 512$\times$512 pixels, a stego image is finally generated. In this paper, as an extraction system, a new optical nonlinear joint transform correlator(NJTC) is introduced to extract the hidden data from a stego image in real-time, in which optical correlation between the stego image and each of the stego keys is performed and from these correlation outputs the hidden data can be asily exacted in real-time. Especially, it is found that the SNRs of the correlation outputs in the proposed optical NJTC-based extraction system has been improved to 7㏈ on average by comparison with those of the conventional JTC system under the condition of having a nonlinear parameter less than k=0.4. This good experimental results might suggest a possibility of implementation of an opto-digital multiple information hiding and real-time extracting system.