• Journal of Environmental Science International
• /
• v.13 no.6
• /
• pp.489-495
• /
• 2004

The purpose of this research is to apply GIS(Geographic Information System) for the road simulation and find some benefits analysis for the design processes. The northern Jeju island was selected as a case study. The 1/5,000 digital map and GIS technique were used for optimum road design of the island based on Arc View software. Using this software we can get an overlay map by combination of hill shade map, slope map, aspect map, and building buffer map. Based on the overlay map, we designed the optimum road line and performed three dimensional simulation. From the results, we found that the developed three dimensional road simulation technique using GIS technique that was very useful tool to estimate the reasonable road design before the real road construction works.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.2
• /
• pp.59-65
• /
• 2008

Digital close-range photogrammetric technique can measure and describe 3D geometric farm from 2D image. This technique is increasingly applied in the field of sciences. In the fields of civil and mechanical engineering, which need precise measurements for design, expensive measuring equipments are widely used. In occasions where visual inspection is required in addition to other forms of measurements, appropriate measuring equipments have not been yet available. This study utilizes digital close-range photogrammetric technique to quantitatively analyze behavior patterns before and after destruction from test model of reinforced-soil wall. Then the results are compared with the measurements obtained using digital theodolite to verify the reliability of the proposed method.

• Advances in Computational Design
• /
• v.8 no.4
• /
• pp.309-325
• /
• 2023

An innovative inertial reactive armor is being developed through a multi-discipline project. Unlike the well-known explosive or non-explosive reactive armour that uses high-energy explosives or bulging effect, the proposed inertial reactive armour uses active disc elements that is set to rotate rapidly upon impact to effectively deflect and disrupt shaped charges and kinetic energy penetrators. The effectiveness of the proposed armour highly depends on the tangential velocity of the impact point on the rotating disc. However,for a single layer armour with an array of high-speed rotating discs, the tangential velocity is relatively low near the center of the disc and is not available between the gap of the discs. Therefore, it is necessary to configure the armor with double layers to increase the tangential velocity at the point of impact. This paper explores a multi-objective geometry design optimization for the double-layered armor using Nelder-Mead optimization algorithm and integration tools of the python programming language. The optimization objectives include maximizing both average tangential velocity and high tangential velocity areas and minimizing low tangential velocity area. The design parameters include the relative position (translation and rotation) of the disc element between two armor layers. The optimized design results in a significant increase of the average tangential velocity (38%), increase of the high tangential velocity area (71.3%), and decrease of the low tangential velocity area (86.2%) as comparing to the single layer armor.

• Smart Structures and Systems
• /
• v.22 no.2
• /
• pp.167-174
• /
• 2018

Digital input and output modules are widely used to connect digital sensors and actuators to automation systems. Digital I/O modules provide flexible connectivity extension to numerous sensors and actuators and protect systems from high voltages and currents by isolation. Components in digital I/O modules are inevitably affected by operating and environmental conditions, such as high voltage, high current, high temperature, and temperature cycling. Because digital I/O modules transfer signals or isolate the systems from unexpected voltage and current transients, their failures may result in signal transmission failures and damages to sensitive circuitry leading to system malfunction and system shutdown. In this study, the lifetime of optocouplers, one of the critical components in digital I/O modules, was predicted using Bayesian tracking approaches. Accelerated degradation tests were conducted for collecting the critical performance parameter of optocouplers, current transfer ratio (CTR), during their lifetime. Bayesian tracking approaches, including extended Kalman filter and particle filter, were applied to predict the failure. The performance of each prognostic algorithm was then compared using accuracy and robustness-based performance metrics.

• Journal of the Korean Society of Costume
• /
• v.58 no.4
• /
• pp.1-12
• /
• 2008

The expansion of media art has not only developed the digital technology but also given lots of environmental evolution to improve various fields of design as the main topic of the 21st century. The purpose of this study is aimed at proposing the new design that integrates fashion accessaries with media art technology. This will be done by understanding the social environment in digital ages and studying technology of design based on a variety of literature about changes in our society, neo value, vision, culture and art with fundamental notion of media art. First stage for this study, put an idea into just fashion accessary design because it is not sufficient to incoporate fashion and media art technology. The presented OLED(Organic Light Emitting Diodes) in this study is a kind of display to be in a limelight in the next generation and can be applied to various field of design. media art simultaneously moved into the scope of artistic debates. As a result, we can found that the use of audiovisual introduced numerous new aspects to the conceptual and aesthetic engagement with questions of conception. Today, the presented forms of art and inter-action from the closed -circuit work to interactive media art installations to open process-exist as parallel possibilities.

• Journal of Korea Multimedia Society
• /
• v.22 no.8
• /
• pp.950-959
• /
• 2019

The purpose of this study was to investigate the effect of integrated teaching and learning method using augmented reality for effective promotion of child - friendly attitude and environmental preservation attitude and explored its applicability. For this purpose, based on the augmented reality fairy tale, we designed an experience - oriented integrated teaching and learning method such as reading book, story - telling, drawing, environmental conservation practice activity. The experimental group was divided into two groups: augmented reality reading fairy tales (A) and children's book reading fairy tales (B). First, interest, immersion, and empathy were higher in the application environment of integrated learning teaching method based on Augmented Reality. Second, there was no difference between the two groups in content understanding. Third, in terms of expressiveness, it was verified that various expressions were expressed in the applying environment of the integrated teaching - learning method based on augmented reality through drawing activities. Fourth, in practice activities, more students were practicing in the augmented reality - based integrated teaching - learning method applied environment, and the number of practice activities of individual students was also confirmed. This study suggests that the application of the integrated teaching and learning method can enhance the effect of education when using the smart teaching media using the augmented reality in early childhood education.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1157-1166
• /
• 2022

With the advent of the non-face-to-face era, a new type of digital sexual crime with avatars is emerging on the Metaverse virtual reality platform. Due to the lack of clearly established in legal and regulatory systems, it is challenging to punish offenders and acquire digital proof for sexual crimes using these avatars. This research aims to suggest a service and technological solution is development platform that may assist crime prevention and the collection of digital evidence, with a particular emphasis on digital sex crimes that occur in the metaverse, a virtual reality realm. This study explores the reasons behind the difficulty of legal application in the metaverse and then determines the types of digital sex crimes that may occur in the metaverse. In addition, it is suggested what service components the metaverse should contain from the stage of construction and design, can be utilized what element of metaverse in order to prevent illegal activity of avatars.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.14-23
• /
• 2017

In high-density high-rise cities such as Hong Kong, buildings account for nearly 90% of energy consumption and 61% of carbon emissions. Therefore, it is important to study the design of buildings, especially high-rise buildings, to achieve lower carbon emissions in the city. The carbon emissions of a building consist of embodied carbon from the production of construction materials and operational carbon from energy consumption during daily operation (e.g., air-conditioning and lighting). An integrated analysis of both types of carbon emissions can strengthen the design of low carbon buildings, but most of the previous studies concentrated mainly on either embodied or operational carbon. Therefore, the primary objective of this study is to develop a holistic methodology framework considering both embodied and operational carbon, in order to enhance the sustainable design of low carbon high-rise buildings. The framework will be based on the building information modeling (BIM) technology because BIM can be integrated with simulation systems and digital models of different disciplines, thereby enabling a holistic design and assessment of low carbon buildings. Structural analysis program is first coupled with BIM to validate the structural performance of a building design. The amounts of construction materials and embodied carbon are then quantified by a BIM-based program using the Dynamo programming interface. Operational carbon is quantified by energy simulation software based on the green building extensible Markup Language (gbXML) file from BIM. Computational fluid dynamics (CFD) will be applied to analyze the ambient wind effect on indoor temperature and operational carbon. The BIM-based framework serves as a decision support tool to compare and explore more environmentally-sustainable design options to help reduce the carbon emissions in buildings.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.413-416
• /
• 1998

Sensitivity and calibration considerations are most important in the design and implementation of real control systems. Ideally parameter changes due to various causes should not appreciably affect the system's performances. But all the values of physical components of the plants and controllers as well as the relevant environmental conditions change in time, thus the output performance can be deteriorated during the operating span of the system. Naturally the duty of calibration or the prevention of performance deterioration due to excessive component sensitivity should be provided to the control system. In this paper, we propose a digital controller which has the capability of calibration and gain adjustment as well as the execution of control law. Specifically the problems of gain adjustment and offset calibration in the light source and CdS sensor module for position measurement in a flexible link system are considerably resolved. The parameters of measurement module are prone to change due to environmental brightness conditions resulting in poor steady state performance of the overall control system. Thus a proper method is necessary to provide correction to the changed values of gain and offset in the position measurement module. The proposed controller, whenever necessary, measures the open-loop characteristics, andthen calculates the offset and sensor gain correction values based on the prepared standard measurements. It is applied to the control of a flexible link system with the gain and offset calibration porblems in the light sensor module for position to show the applicability.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.1
• /
• pp.57-63
• /
• 2010

This study examines the correlations of crime-prone locations with the urban space configuration in residential district. CPTED(Crime Prevention Through Environmental Design) is applied to this study and it is intended to control the architectural environment in order to restrain criminal activities. For this reason, an objective analysis for explaining the spatial characteristics of the places where the crimes have occurred is more important than statistical and descriptive approach for analyzing the criminal data. Visibility graph analysis (VGA) supports the CPTED theory in this study for objective interpretation of crime-prone locations and quantitative analysis for built environment. The comparative analysis on object streets and areas are used and the results are followings. The analysis by streets showed that street crimes are correlated with connectivity, control, integration, and integration(r=3) and burglary cases are correlated with control. The analysis by areas showed that street crimes are correlated with connectivity and integration. The T-tests results of crime area and whole area showed that street crimes are correlated with integration and burglary cases have negative correlation with connectivity. Several localized environmental design for crime prevention are also proposed on the basis of this study.