• Transactions of Materials Processing
• /
• v.28 no.6
• /
• pp.368-374
• /
• 2019

The past recent years have seen an increasing use of high-strength steel sheets in the automotive industry. However, the formability and damage prediction of these materials requires accurate acquisition of necking and fracture strains. Digital image correlation (DIC) is used to accurately capture the necking and fracture strains during testing. The fact that single time points of capturing vary with frame rate makes the need for an investigation necessary. For the high-strength steel DP980, the frame-rate dependences of the final necking and fracture strains values are analyzed here. To eliminate the influence of gauge length, the strains were measured locally by DIC. Results for three specimen shapes obtained with frame rates of 1 and 900 fps (frames per second) were considered and based on them, triaxiality failure diagrams (TFD) are established. It was observed that after diffuse necking, the deformation path departed from the initially linear one, and the stress triaxiality grew with ongoing deformation. It was further revealed that the frame rate-dependence of the necking strain was rather low (< 2%), whereas the fracture strain could be underestimated by up to 8% when the lower frame rate of 1 fps was used (compared with 900 fps). In this study, this issue is investigated while taking into consideration the three different triaxialities. These results demonstrate the importance of choosing an appropriate frame rate for the determination of necking and fracture strains in particular.

• Journal of Engineering Education Research
• /
• v.6 no.2
• /
• pp.5-14
• /
• 2003

In this paper, we developed an efficient virtual experiment kit with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since our virtual experiment kit is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, our web-based virtual experiment kit is designed to enhance the efficiency of both the learners and the educators. The learners will be able to achieve high learning standard and the educators save time and labor. The virtual experiment is performed according to the following procedure: (1) Circuit Composition on the Bread Board (2) Applying Input Voltage (3) Output Measurements (4) Checkout of Experiment Results. Furthermore, the circuit composition on the bread board and its corresponding online schematic diagram are displayed together on the virtual experiment kit for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

• Journal of Digital Convergence
• /
• v.18 no.2
• /
• pp.323-331
• /
• 2020

This study was to perform a systematic review to examine pressure ulcer preventive intervention and risk factors. PRISMA flow diagram in accordance with the selection process of this research was done. The literatures were retrieved from domestic and international study from 2010 to June, 2019. A total of 30 literatures were selected according to the selection criteria of this study. The literatures were searched electronically using the search engine with the key words of 'pressure ulcers', 'bedsore', 'decubitus ulcers', 'intervention', 'prevention'. The results of this study suggest that mediation with position change and pressure reduction device reduced the incidence of pressure sores and was important for prevention. Based on the results of this study, we provide basic data for preventive intervention of pressure ulcers that are appropriate for each medical institution.

• Journal of Technology Innovation
• /
• v.16 no.2
• /
• pp.65-94
• /
• 2008

There has been rapid diffusion of digital innovation technology(DIT) such as 3 D CAD, CAE, simulation software which enable firms to see the future results of intended product designs through 3 D diagram and simulated results. This technology helps firms to reduce trial and error process by solving later stage problems in earlier stages. The DIT being the technology reflecting the real world, as a tool representing the simplified form of the real world, the degree of reflecting the real world(fidelity) is important in utilizing the DIT. This study is an exploratory research examining the process of reviewing the fidelity of the DITs and developing the complementary process necessary for utilizing the DIT with 'not good enough' fidelity. This study could draw out, from its case study, an exploratory hypothesis about the process of developing the complementary process. In the process, there is an analysis of the corresponding relationship between the actual data and the output data of the DIT, e.g. simulated result. Then the input data or output data are adjusted on the basis of the analysis of the corresponding relationship so that the discrepancy between the actual data and the expected interpretation of the output data, through the adjustment, of the DIT, can be reduced. This process is sometimes accompanied by the process of generating experimental data, which reflect the unique situation of the product development process of a company, to be put to the data base of DIT. The complementary process is the process requiring knowledge sharing and adjustment activities across different divisions. This study draw outs implications for effective management of the fidelity of DIT tools.

• Journal of Digital Contents Society
• /
• v.11 no.1
• /
• pp.25-38
• /
• 2010

There is no guideline or standard for the specification of the open-source-framework-based Spring AOP, and it causes confusion in development and maintenance. Moreover, the inconsistency between the existing MVC model, the AOP model that is used for Struts framework and the UML diagram makes the aspect reuse more difficult. In this study, a widened existing method was proposed so that Aspect, Pointcut and Advice could be expressed by either UML or XML to ensure that the Spring AOP can accept the combined use of the existing MVC model and the AOP model, which is used for Struts framework. Relationship was defined so that the mutual conversion could be possible with the proposed expression method, and the realization of simple development and maintenance was verified via the examples of mutual conversion. In addition, a packaging method to efficiently reuse aspect was proposed, and the possibility of reuse was verified.

• Journal of Digital Contents Society
• /
• v.18 no.4
• /
• pp.769-775
• /
• 2017

The International Maritime Organization's e-Navigation strategy is to introduce new technologies to ships to support easier and safer navigation. With the e-Navigation strategy, various equipment will be installed in vessels and the system structure will be linked to onshore systems. For this reason, a common data structure between systems became necessary, and finally the S-100 standard developed by the International Hydrographic Organization was selected. This paper describes a design of marine casualty data model based on the S-100 standard. The data model of the S-100 standard is designed in the form of a UML class diagram, and the final encoding follows the GML / XML format. We will look at the S-100 standard and product specifications under development, and describe the S-100 standards-based data design and portrayal definition of marine accident data.

• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.379-389
• /
• 2020

This is a qualitative study about Google 'Nest Hub Max' that displays proactive intelligent personal assistant. Following the step of grounded theory, an in-depth interview for 6 users who had used this device for a month was taken. 186 concepts were discovered, categorized as 11 top-categories and 24 sub-categories. Paradigm diagram, considering axis-coding, was made and it have been narrowed down to 'Usage patterns' of proactive IPA, considering selective coding aspects. 'Usage patterns' were divided to passive and active user. Thus, neither passive user nor active user was satisfied about device and proactive IPA. This study is meaningful that it constructed basic data about the user experience of proactive IPA on this device. It will support the device or service that consists proactive IPA in the future.

• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.157-163
• /
• 2018

People who use SNS publish their diverse ideas on SNS every day. The data posted on the SNS contains many people's thoughts and opinions. In particular, popular keywords served on Twitter compile the number of frequently appearing words in user posts and rank them. However, this method is sensitive to unnecessary data simply by listing duplicate words. The proposed method determines the ranking based on the topic of the word using the relationship diagram between words, so that the influence of unnecessary data is less and the main word can be stably extracted. For the performance comparison in terms of the descending keyword rank and the ratios of meaningless keywords among high rank 20 keywords, we make a comparison between the proposed scheme which is based on morphological analysis and PageRank, and the existing scheme which is based on the number of appearances. As a result, the proposed scheme and the existing scheme have included 55% and 70% of meaningless keywords among high rank 20 keywords, respectively, where the proposed scheme is improved about 15% compared with the existing scheme.

• Journal of Digital Convergence
• /
• v.17 no.4
• /
• pp.137-147
• /
• 2019

This paper studies the effect of content information quality of u-tourism information system on flow theory and satisfaction. The purpose of the research is to generate and propose flow-related information to satisfy tourists with content information quality. The meaning of this paper is to derive success factors for verifying satisfaction of content information quality to tourists, establish hypotheses as research models, and evaluate verification. The differentiation of this study is the design implementation of u-fusion tourism information system by combining flow relation information with flow theory. The contribution of this paper is the generation of flow related information and the elicitation of success factors of contents quality of u-tourism information system. The advantage is that tourists can be patterned by symbolization and the pattern can be illustrated. The limitations of this paper are limited to small areas, and the lack of objectivity is required and future tasks are needed to compensate for them.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.17 no.1
• /
• pp.57-73
• /
• 2021

The purpose of this study is to analyze the diffusion period and productivity of smartwork in an organization. Firms are increasingly interested in smartwork for non contact work and working from home because of the corona 19. The smartwork is a new technology that changes face-to-face work in an organization. It helps the work of individuals and organizations regardless of time and place. The theoretical background describes the complexity, system thinking, diffusion theory, smart work, organizational resistance, and productivity. This study analyzes the diffusion period and productivity of smart work through business simulation techniques. A simulation study progresses four stages. There are problem definition, hypothesis establishment and causal loop diagram, model construction and verification, and policy evaluation. The simulation models contain an individual's resistance variables organizational investment and leadership variables related to the operation of smartwork. The organizational investment variables include organizational culture, legal system, implement systems and technology investment. The individual resistance variables include cognitive, attitude, structure and technological resistance. The leadership includes leadership interest variables and performance linkage variables. The simulation executed the changes of a people number adopting smart work and the organizational productivity monthly. As a result of the simulation, many organization members have accepted the smart work innovation after 20 months. The organizational productivity through smart work showed very high value after 16 months. In scenario analysis, the individuals' awareness and attitude resistance showed very important variables to productivity and a personal change of smart work adoption. Meanwhile, The organizational investment showed that the high driving-force increased not productivity and the low driving-force showed decreased low productivity. Also, leadership variables showed a powerful driver for changing smart work productivity. The implication of the study has suggested extending complexity, diffusion theory and organization resistance theory based on simulation methods.