• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1011-1017
• /
• 2004

Ultra Wideband(UWB) technologies have been developed to exploit a new spectrum resource in substances and to realize ultra-high-speed communication, high precision geolocation, and other applications. The energy of UWB signal is extremely spread from near DC to a few GHz. This means that the interference between conventional narrowband systems and UWB systems is inevitable. However, the interference effects had not previously been studied from UWB wireless systems to conventional mobile wireless systems sharing the frequency bands such as Korean Cellular CDMA and WCDMA. This paper experimentally evaluates the interference from two kinds of UWB sources, namely a direct-sequence spread-spectrum CDMA(DS-CDMA) UWB source and an impulse radio UWB source, to a Cellular CDMA and WCDMA digital transmission system. The average frame error rate degradation of each system are presented. From these experimental results, the interference effects of DS-CDMA UWB source is not severe compared to the Impulse UWB.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.667-670
• /
• 2005

As security and surveillance have become the center of interest, remote controlled CCTV(Closed-Circuit Television) market has been formed while rapid development of digital image compression technology and Internet triggered the advent of web cameras. The characteristic of web camera is that it can provide users with higher quality image than CCTV at any place where Internet access is available. However, As for the system administrator, the existing web camera have disadvantage in that they allows users only. who are connected to the server of the web camera, to see the image from it. In this paper, in order to make up for this defect, designed multi-vision interface showing multi images on single screen and, for the purpose of the improvement in efficiency, the functions of saving images and of scheduling the time to save the images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.93-97
• /
• 2005

Sea operation monitoring system is a system for the automatic ship operation that is used on the variety sea operations such as laying optical cables on the sea between the countries, laying cables on the seabed for a remote island, laying pipelines for the natural gas, and so forth. This system processes data which optained through setting up environment and input from several sensors, and display GPS information with ENC data. And this system processes not only data of root file about sea operation, but also realtime information from PDA of client wirelessly connected with AP on wireless LAN, In addition, this system can improve efficiency of the operation as a result of enabling free movement within valid range. This paper design and Implementation Monitoring system from above appropriate to the embedded system, and improve competitive power of ship through prevention of a ship accident, to keep minimizing operation loads and support both the automatic ship operation and the safety voyage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.906-912
• /
• 2012

A ship ad-hoc network (SANET) can provide ships with diverse multimedia services by replacing expensive satellite communications. While ITU-R M. 1842-1, standards for maritime VHF band digital communications, can be used as the specifications of physical layer for SANETs, no standards are specified for higher layers of SANETs. In this paper, we propose a ship ad-hoc communication (SAC) protocol for SANETs, based on medium access control (MAC) and routing protocols for terrestrial ad-hoc networks. SAC protocol is a cross-layer protocol which combines MAC and routing into one algorithm and considers maritime environments, including the existence of neighboring ships, the possibility of routing to a destination, and changing the communication mode in case of VHF channel failure.

• Journal of Information Technology Services
• /
• v.16 no.1
• /
• pp.139-162
• /
• 2017

Museums contain a significant meaning as a place that reflects empirical knowledge that have been accumulated socially and scientifically in overall life of the public and provides the opportunity to enjoy prestigious culture, while serving as the extended place of education. The first objective of this study is to increase the accessibility of general public through the development of online museum programs as service contents and to present the ultimate direction the development of in art appreciation contents that can effectively expand the infrastructure of culture and art. Second, the effectiveness of online art appreciation programs by registered private museums, which continuously develop smart media-based online museum contents and systemization of archive as the distribution rate of smart devices is increased due to generalization of digital environments, was analyzed by each case to examine the objective distinctions strategies. Third, in terms of museum visitors and smart contents users, this study examines the expected effects of popular distribution by seeking various ways that can enhance the desired exhibit appreciation and autonomous utilization of educational programs, while not being restricted by the physical accessibility and limitation of space at the museums. The subjects of this study included cases of BoroomSan Museum, Savina Museum of Contemporary Art, Imageroot, Sangwon Museum of Art, Hello Museum, etc. and the online smarts contents art appreciation educational programs by registered private museums were analyzed. Results expected to achieve from such processes are as follows. First, the possibility to expand cultural participation in museum exhibition appreciation and museum education infrastructure became widen. Second, the educational program resources can be utilized as the culture and art asset that strengthens the museums' responsibilities in their social role. Third, museum archive can be constructed in more systematic way, and the efficiency of museum archive system can be enhanced to maintain the museum collection database in a consistent format. Fourth, the museum's smart contents users' continued access to museum's online contents may induce the exhibition effect of the site and voluntary participation in education, and can also expect an economic synergy effect as the users become potential visitors that may actually visit the museum in the future.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2798-2805
• /
• 1997

The paper studies the Quality of Service(QoS) concept in Broadband Integrated Services Digital Network (B-ISDN). Guaranteeing the QoS requirements indistributed multimedia systems and networks is fundamentally an end-to-end issus, that is, from application to application. An important issue in the QoS translation between the application-level QoS and network-level QoS is that the translation depends not only on the translation between system resources and network resources, but also on the translation between thelayered protocol and the access procedures. In this paepr, we propose a methodology for translating the AAL(ATM Adaptation Layer) QoS parameters into the ATM layer QoS parameters in end-systems. The QoS parameters in the ATM layer and AAL are defined, and we concentrate on the translation from the AAL to the ATM layer, because the AAL must be designed to be service dependent and specific. As an example, we concentrate on the constant bit rate(CBR) guaranteed real-time service using AAL1 protocol.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.10
• /
• pp.3201-3209
• /
• 2000

The developmenl and ]Jopulmization of Internet changes our whole Life style. Nowadays, the research on the digital network in home(HAN, Home Area Network) is now under studying This technology is more and more required accordmg to development of digitalized household e1ecil1c allplmnces and the digItal data/control network The Intemet technology requirement in ome Area is also on the increase The Internat Icchnology now using in home is through ADSL modem and Cable modem. From now on, the prospect of the Home Area Network environment will be developed until FTTH(Fibcr To The Home) In this paper, we mcssure the network propagation perfonnance to verify which the user in home can enjoy the diiltal multimedia data throngh these high speedinternet technology. We also measme another performance when we use these high speed mternet technology as FTTH.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1689-1690
• /
• 2006

This study is for implementation of PC based Motor fault diagnosis system. By using harmonics and current signals of the motor, this system diagnoses the motor condition by accumulated harmonic contribution rate. In this proposed system that was composed of 5 parts. A sensor, connection box, evaluation board, device server, and main computer are those. There were two types of sensor, one was harmonic sensor the other was current sensors. The signal was acquired by sensor, and transferred to evaluation board. Second one is connection box. Because the output type of sensor and input type of evaluation board is different, connection box was necessary. Third one was evaluation board. The signal from the sensor was converted to digital signal in evaluation board. And this signal was transferred to device server. Fourth one was device server Device server transferred the data from evaluation board to main computer. And the last one was other parts controlled by main computer. In main computer, there were communication and diagnosis algorithms. The result was derived by main computer. In the result, there were 12 categories and 5 levels of motor conditions. The proposed system had some advantages comparing with stand alone type commercial motor fault diagnosis system. The first, by using remote access it was easier to get the conditions of motor. The second, there was no need to handle the sensors when users measured the motor signals. By this property, no one was necessary at motor location site. The third, this system was less restricted by times and places than commercial stand alone type diagnosis system. Therefore users can operate this system only using the main computer. Once the sensors are installed at the motor, users doesn't need to move to check up the condition of motors. Moreover, if there is ethernet hub, many motors can be not only diagnosed at once but also decreased its cost.

• The Journal of Information Technology
• /
• v.7 no.1
• /
• pp.43-56
• /
• 2004

The purpose of this paper is to study the send and receive of the message in the TEDI System. The TEDI System replaces a series of trade documents with electronic date, and it realizes secure and reliable transactions of data among parties by means of open networks, such as the Internet. The TEDI system is composed of Web browsers, TC Serves, a RSP Server, and Certification Servers. TEDI has development the system and legal frame work. Exporters, importers, carriers, banks insurance and companies those who engage in the trade releated business have tested TEDI system and evaluated the legal frame work from the practical point of view. TEDI is now refining the system and preparing for the service. A fundamental feature of the TEDI System is the attribution to participants of data messages through public key certificates issued by certification authorities that allow for verification of digital signatures. Access to servers maintained by such certification authorities also takes place through the internet. In principle, certificates used by any reputable certification authority may be employed as long as they are compatible with X.509 V3.