• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.77-82
• /
• 2015

To increase the performance of solid oxide fuel cell operating at intermediate temperature ($600^{\circ}C{\sim}800^{\circ}C$), $Sm_{0.2}Ce_{0.8}O_2$ (SDC) thin layer was applied to the $La_{0.8}Sr_{0.2}Mn_{0.8}Cu_{0.2}O_3$ (LSMCu) cathode by sol-gel coating method. The SDC was employed as a diffusion barrier layer on the yttria-stabilized zirconia(YSZ) to prevent the interlayer by-product formation of $SrZrO_3$ or $La_2Zr_2O_7$. The by-products were hardly formed at the electrolyte-cathode interlayer resulting to reduce the cathode polarization resistance. Moreover, SDC thin film was coated on the cathode pore wall surface to extend the triple phase boundary (TPB) area.

• Journal of Korean Vacuum Science & Technology
• /
• v.1 no.1
• /
• pp.24-29
• /
• 1997

Surface morphologies and fundamental characteristics of molybdenum nitride films deposited by reactive dc magnetron sputtering were studied for application to Cu diffusion barrier. A phase transformation from Mo to $\gamma$-Mo$_2$N phase at 0.5$N_2$ flow ratio.($N_2$/(Ar+$N_2$)) equal to and larger than 0.2, whereas a second phase transformation to $\gamma$-MoN phase at 0.5 N2 flow ratio, With the variation of the N2 ratio the surface morphologies of the films were generally smooth except the cases of 0.2 and 0.3$N_2$ gas rations, where build-up of film stresses occurred. $\gamma$-Mo$_2$N film was found to crystallize at the deposition temperature of 40$0^{\circ}C$. The surfaces of $\gamma$-Mo$_2$N films deposited up to 40$0^{\circ}C$ were smooth, but the film deposited at 50$0^{\circ}C$ had very rough surface morphology. It seems that this was due to the building-up of thermal stresses at the high deposition temperature, which might lead to hillock formation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.145-145
• /
• 2012

반도체 집적회로의 집적도가 증가함에 따라 RC delay가 증가하며, 금속 배선의 spiking, electromigration 등의 문제로 인해 기존의 알루미늄 금속을 대체하기 위하여 구리를 배선재료로 사용하게 되었다. 하지만 구리는 실리콘 및 산화물 내에서 매우 빠른 확산도를 가지고 있으므로, 구리의 확산을 막아 줄 확산방지막이 필요로 하다. 이러한 확산방지막의 증착은, 소자의 크기가 작아짐에 따라 via/contact과 같은 고단차 구조에도 적용이 가능하도록 기존의 sputtering 증착 방법에서 이를 개선한 collimated sputter, long-throw sputter, ion-metal plasma 등의 방법으로 물리적인 증착법이 지속되어 왔지만, 근본적인 증착방법을 바꾸지 않는 한 한계에 도달하게 될 것이다. 원자층 증착법(ALD)은 CVD 증착법의 하나로, 소스와 반응물질을 주입하는 시간을 분리함으로써 증착하고자 하는 표면에서의 반응을 유도하여 원자층 단위로 원하는 박막을 얻을 수 있는 증착방법이다. 이를 이용하여 물리적 증기 증착법(PVD)보다 우수한 단차피복성과 함께 정교하게 증착두께를 컨트롤을 할 수 있다. 본 연구에서는 이러한 원자층 증착법을 이용하여 구리 배선을 위한 확산방지막으로 텅스텐질화막을 형성하였다. 텅스텐 질화막을 형성하기 위하여 금속-유기물 전구체와 함께 할라이드 계열인 WF6를 텅스텐 소스로 이용하였으며, 이에 대한 원자층 증착방법으로 이루어진 박막의 물성을 비교 평가하여 분석하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.433-433
• /
• 2011

Since the concept of graphene was established, it has been intensively investigated by researchers. The unique characteristics of graphene have been reported, the graphene attracted a lot of attention for material overcomes the limitations of existing semiconductor materials. Because of these trends, economical fabrication technique is becoming more and more important topic. Especially, the epitaxial growth method by sublimating the silicon atoms on Silicon carbide (SiC) substrate have been reported on the mass production of high quality graphene sheets. Although SiC exists in a variety of polytypes, the 3C-SiC polytypes is the only polytype that grows directly on Si substrate. To practical use of graphene for electronic devices, the technique, forming the graphene on 3C-SiC(111)/Si structure, is much helpful technique. In this paper, we report on the growth of graphene on 3C-SiC(111) surface. To investigate the morphology of formed graphene on the 3C-SiC(111) surface, the radial distribution function (RDF) was calculated using molecular dynamics (MD) simulation. Through the comparison between the kinetic energies and the diffusion energy barrier of surface carbon atoms, we successfully determined that the graphitization strongly depends on temperature. This graphitization occurs above the annealing temperature of 1500K, and is also closely related to the behavior of carbon atoms on SiC surface. By analyzing the results, we found that the diffusion energy barrier is the key parameter of graphene growth on SiC surface.

• Journal of Sensor Science and Technology
• /
• v.16 no.6
• /
• pp.434-440
• /
• 2007

Two kinds of new NOx sensing mechanism was proposed and examined. One of those was potentiomtric sensor based on the measurement of decomposed oxygen from NO using YSZ porous diffusion barrier and Pd catalytic electrode. The sensor based on decomposed oxygen measurement responded to the range of 300 - 1000 ppm NO in $N_{2}$ environment and the sensitivities were coincident with theoretical values at 700 and $800^{\circ}C$ but the decomposition rate depended on gas flow rate. The other sensor was equilibrium potentiometric type using $Gd_{2}O_{3}$-nitrates solid solution as sensing material. The sensor using $Gd_{2}O_{3}$-nitrates solid solution was suitable for NOxxsensing at $700^{\circ}C$ in 5 % oxygen and the sensitivity was 19.3 mV/decade. However, long term stability of the sensing material at high temperature was not sufficient.

• Journal of the Korean Magnetics Society
• /
• v.15 no.2
• /
• pp.130-132
• /
• 2005

Tungsten carbon nitride (W-C-N) thin films were produced by reactive radio frequency (RF) magnetron sputter-ing of tungsten in $Ar-N_2$ gas mixture. The effects of the variation of nitrogen partial pressure on the composition, and structural properties of these films as well as the influence of post-deposition annealing have been studied. When $La_{0.67}Sr_{0.33}MnO_3$ was coated on the W-C-N/Si substrate, coercivity ($H_c$) and magnetization at room temperature shows 58.73 Oe, and 29.4 emu/cc, respectively. In order to improve the diffusion barrier characteristics, we have studied the impurity behaviors to control the ratios of nitrogen and carbon concentrations.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.6
• /
• pp.637-645
• /
• 1991

Physicochemical factors affecting cooking and eating quality of rice and their mechanisms were investigated. The stickiness of cooked rice was negatively correlated with amylose content(r=0.58, p<0.05) and protein content(r=-0.72, p<0.01), but not affected by crude fat content of rice. The ultrastructure of cooked rice grain showed the progressive gelatinization of starch from the periphery toward the center of the endosperm as water and heat energy diffused into. The rate of water diffusion appears to be dependent on the cell arrangement in the endosperm and the protein content of milled rice. Once water and heat reach the starch granules, the rate of in situ gelatinization of starches appears to be dependent on their own gelatinization temperature range and amylose content. Protein acts as a barrier for the swelling of starch and water diffusion in two ways : 1) by encasing starch granules in the starchy endosperm, and 2) by forming a barrier between the subaleurone layer and the starchy endosperm. Therefore, the separation and fragmentation of the outermost layers of the endosperm occurred more easily in the low-protein content rices, and was associated with increases of solids lost in cooking-water at 95$^{\circ}C$ and stickiness of cooked rice.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.162-165
• /
• 2003

The corrosion characteristics of diffusion barrier in Copper CMP has been investigated. Key experimental variables that has been investigated are the corrosion rate by different agents containing slurry of Cu CMP. Whenever Cu and Ta films were corroded adding each oxidizer, the corrosion rate of Ta was much lower than that of Cu. That is, the difference in the corrosion rates of Ta by oxidizer was not larger as compared with Cu. As corroded by complexing agents, the corrosion rate of Ta was close to O. The corrosion rate of Ta increased as added $HNO_3$ and $CH_3COOH$ compared with the reference slurry; on the other hand, it decreased with addition of HF. In addition, resulting corrosion rate went up with lower pH of agent. The corrosion rates by agents were however significant small; hence, it doesn't affect on the removal rate of Cu CMP practically. Consequently, this can be explained by assuming that the mechanical effect dominates than the chemical effect on the polishing rate of Ta(TaN).

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.11
• /
• pp.921-925
• /
• 2000

Characteristics of Pb(Mg, Nb)O$_3$-Pb(Zr, Ti)O$_3$system thick films fabricated by a screen printing method were investigated. The buffer layer were coated with various thickness of Ag-Pd by screen printing to investigate the effect as a diffusion barrier and deposited Pt as a electrode by sputtering on Ag-Pb layer. The printed thick films were burned out at 650$\^{C}$ and sintered at 950$\^{C}$ in O$_2$condition for each 20, 60min after printing with 350mesh screen. The thickness of piezoelectric thick film was 15∼20㎛ and Ag-Pb layer acted as a diffusion barrier above 3㎛ thickness. The PMN-PZT thick films were screen printed on Pt/Ag-Pb(6m) and sintered by 2nd step (650$\^{C}$/20min and 950$\^{C}$/1h) using paste mixed PMN-PZT and binder in the ratio of 70:30, and the remnant polarization of thick film was 9.1$\mu$C/㎠ in this conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.114-115
• /
• 2006

반도체 기술이 초고집적화 되어감에 따라 공정에서 선폭이 줄어들고, 박막을 다층으로 제조하는 것이 중요하게 되었다. 이와 같은 제조 공정 하에서는 Si 기판과 금속 박막간의 확산이 커다란 문제로 부각되어 왔다. 특히 Cu는 높은 확산성에 의하여 Si 기판과 접합에서 많은 확산에 의한 문제가 발생하게 되며. 또한 선폭이 줄어듦에 따라 고열이 발생하여 실리콘으로 spiking이 발생하게 된다. 이를 방지하기 위하여 우리는 3개의 화합물로 구성된 Tungsten-Carbon-Nitrogen (W-C-N) 확산방지막을 사용하였다. 실험은 물리적 기상 증착법 (PVD)으로 질소비율을 변화하며 확산방지막을 증착하였고, 이를 여러 온도에서 열처리하여 X-ray Diffraction 분석을 하였다.