• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.12
• /
• pp.2368-2375
• /
• 1992

The transition of turbulent kinetic energy(TKE) balance along the centerline of the flow unit, which is composed of straight-duct, contraction and free-jet, has been investigated by the hot-wire anemometry. It is found that the mean turbulent kinetic energy is balanced by the dissipation in the internal flow region ; by the production and the dissipation, through contraction ; and by the dissipation, in initial region(X〈8D) of free-jet. But in the developing region (8D〈X〈20D) it is balanced by all of the three(ie, diffusion, production and dissipation). Finally, in the downstream of free-jet, the mean TKE is balanced again by dissipation like as the beginning. The decay-laws along the centerline are checked in the region of free jet as well as in the straightduct. After the developing region of free-jet also exist the decay-laws, the exponent of the axial turbulence being bigger than of the radial.

• Journal of the Korean Society of Safety
• /
• v.22 no.3 s.81
• /
• pp.51-56
• /
• 2007

In recent years, many research works have been carried out in order to obtain a more controlled durability and long-term performance of concrete structures in chloride containing environments. In particular, the development of new procedures for probability-based durability analysis/design has proved to be very valuable. Although there is still a lack of relevant data, this approach has been successfully applied to some new concrete structures. In this paper, the equation used for modelling of the chloride penetration was based on Fick's Second Law of Diffusion in combination with a time dependent diffusion coefficient. The probability analysis of the durability performance was performed by use of a Monte Carlo Simulation. The procedure was applied to an example based on limited data gathered in this country. The influences of each parameter on the durability of concrete structures are studied and some comments for durability design are given. The new procedure may be very useful in designing an important concrete structures in chloride containing environments. Also it may help to predict the service life of concrete structures under a given probability of failure.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.214-217
• /
• 2004

The cure kinetics of blends of epoxy(tetraglycidyl-4,4'-diaminodiphenylmethane ; TGDDM)/curing agent(diaminodiphenyl sulfone ; DDS) resin with amine terminated polyetherimide-CTBN-amine terminated polyetherimide triblock copolymer(ABA) were studied using differential scanning calorimetry under isothermal conditions to determine the reaction parameters such as activation energy and reaction constants. By increasing the amount of ABA in the blends, the final cure conversion was decreased. Lower values of the final cure conversions in the epoxy/ABA blends indicated that ABA hinders the cure reaction between the epoxy and curing agents. 1be value of the reaction order, m, for the initial autocatlytic reaction was not affected by blending ABA with epoxy resin, and the value was approximately 1.0. The value of n for the nth order component in the autocatalytic analysis was increased by increasing the amount of ABA in the blends, and the value increased from 2.0-3.4. A diffusion controlled reaction was observed as the cure conversion increased and the rate equation was successfully analyzed by incorporating the diffusion control term for the epoxy/DDS/ABA blends.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.5
• /
• pp.351-358
• /
• 2008

Extinction characteristics of hydrogen-air diffusion flames at various pressures are investigated numerically by adopting counterflow flame configuration as a model flamelet. Especially, effect of radiative heat loss on flame extinction is emphasized. Only gas-phase radiation is considered here and it is assumed that $H_2O$ is the only radiating species. Radiation term depends on flame thickness, temperature, $H_2O$ concentration, and pressure. From the calculated flame structures at various pressures, flame thickness decreases with pressure, but its gradient decreases at high pressure. Flame temperature and mole fraction of $H_2O$ increase slightly with pressure. Accordingly, as pressure increases, radiative heat loss becomes dominant. When radiative heat loss is considered, radiation-induced extinction is observed at low strain rate in addition to transport-induced extinction. As pressure increases, flammable region, where flame is sustained, shifts to the high-temperature region and then, shrunk to the point on the coordinate plane of flame temperature and strain rate. The present numerical results show that radiative heat loss can reduce the operating range of a combustor significantly.

• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.61-74
• /
• 2000

This study compares the results of environmental impact assessment with the results of post-environmental investigation, using the case of Taean thermal power plant construction. The atmospheric and water qualities were not greatly changed before and after the construction of the power plant. However, the site of the highest concentration predicted by the atmospheric quality modeling in environmental impact assessment was different from that after operation of 4 power plants. There was also a difference in the diffusion range of thermal discharge water between the measured result(1km) and the predicted value(1.5km) with the model. Thus, environmental impact evaluation should be based on long-term (more than a year) environmental monitoring data. For the modeling of atmospheric quality and numerical thermal discharge water diffusion, appropriate models for each plant should be selected and the numerical modeling should be accompanied by computer simulation, wind tunnel test, etc. Moreover, environmental evaluation should focus more on the degree of impact on surroundings than the prediction of changes in surroundings caused by operation of plants.

• Nuclear Engineering and Technology
• /
• v.21 no.1
• /
• pp.56-61
• /
• 1989

A simple, approximate method for determining the two-group adjoint flux based on the Borresen's coarse-mesh 1.5 group diffusion theory scheme is proposed. With the principle of the 1.5 group diffusion theory scheme, the method describes the thermal leakage term of the adjoint flux approximately by the geomerical buckling determined from the fast adjoint flux. The accuracy of the adjoint flux is investigated tv the comparison of the adjoint flux constructed from this method with a fine-mesh finite-difference KIDD computations. It is shown that the proposed method can predict the adjoint flux as good as the KIDD results. Possible applications of the present method are then suggested in conjunction with the application of the perturbation theory.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.4
• /
• pp.439-455
• /
• 2020

Numerical model was developed that simulates radionuclide (3H and 14C) transport modeling at the 2nd phase facility at the Wolsong LILW Disposal Center. Four scenarios were simulated with different assumptions about the integrity of the components of the barrier system. For the design case, the multi-barrier system was shown to be effective in diverting infiltration water around the vaults containing radioactive waste. Nevertheless, the volatile radionuclide 14C migrates outside the containment system and through the unsaturated zone, driven by gas diffusion. 3H is largely contained within the vaults where it decays, with small amounts being flushed out in the liquid state. Various scenarios were examined in which the integrity of the cover barrier system or that of the concrete were compromised. In the absence of any engineered barriers, 3H is washed out to the water table within the first 20 years. The release of 14C by gas diffusion is suppressed if percolation fluxes through the facility are high after a cover failure. However, the high fluxes lead to advective transport of 14C dissolved in the liquid state. The concrete container is an effective barrier, with approximately the same effectiveness as the cover.

• Korean Journal of Materials Research
• /
• v.32 no.2
• /
• pp.107-113
• /
• 2022

Fibrous supercapacitors (FSs), owing to their high power density, good safety characteristic, and high flexibility, have recently been in the spotlight as energy storage devices for wearable electronics. However, despite these advantages, FCs face many challenges related to their active material of carbon fiber (CF). CF has low surface area and poor wettability between electrode and electrolyte, which result in low capacitance and poor long-term stability at high current densities. To overcome these limits, fibrous supercapacitors made using surface-activated CF (FS-SACF) are here suggested; these materials have improved specific surface area and better wettability, obtained by introducing porous structure and oxygen-containing functional groups on the CF surface, respectively, through surface engineering. The FS-SACF shows an improved ion diffusion coefficient and better electrochemical performance, including high specific capacity of 223.6 mF cm^-2 at current density of 10 ㎂ cm^-2, high-rate performance of 171.2 mF cm^-2 at current density of 50.0 ㎂ cm^-2, and remarkable, ultrafast cycling stability (96.2 % after 1,000 cycles at current density of 250.0 ㎂ cm^-2). The excellent electrochemical performance is definitely due to the effects of surface functionalization on CF, leading to improved specific surface area and superior ion diffusion capability.

• Asia Marketing Journal
• /
• v.14 no.2
• /
• pp.1-22
• /
• 2012

Gifticon is an innovative new service of SK Marketing & Company. Launched in the end of 2006 for the first time in the world, the mobile gift certificate is in the form of a SMS message that bears a bar code to exchange with real products sent to the intended recipient through internet portal, messenger or/and mobile phones. The service started by connecting individuals (B2C business) and was expanded to the new marketing tools of companies (B2B business). While the business took off with soft progress in the initial year of launch, Gifticon business finally gained its momentum in the growth of sales in its second and third year. Yet, the data showed that the growth of user-base was getting stagnant that the number of users remained flat for the past few months. Moreover, competition from latecomers such as Giftishow from KTF and Heartcon from LG Telecom gets fierce. Particularly in B2B sector where Gifticon has made minimal profit, competitors started aggressive promotional activities, taking away shares from Gifticon. Under these circumstances, team is facing tough strategic decisions for its long-term growth; How can they further grow the business? Should they go after more massive targets for broader user-base? Should they pursue B2B business more aggressively? This case study asks students to come up with solutions for these questions by understanding concepts, theories and models for diffusion of innovations and strategies to overcome a chasm.

• Journal of Cadastre & Land InformatiX
• /
• v.48 no.2
• /
• pp.65-77
• /
• 2018

It is very important to understand the factors affecting the occurrence of vacant houses in research on them. The purpose of this study is to analyze the factors affecting the rural vacancy occurrence. This study set 121 research areas and selected eight independent variables (Aged house rate, housing transaction rate, house diffusion ratio, local extinction index, net migration rate, regional aging index, the ratio of the number of employees to population and financial independence rate) and one dependent variable (vacant house rate). As a result of the study, first, both Model 1 for the entire general agricultural fishing village area and Model 2 for the county (gun) area were statistically significant, there was no problem with the independence of residual. Second, local extinction index and aged house rate had a statistically significant positive (+) relationship in both Model 1 and Model 2. Third, diffusion ratio of house had a statistically significant positive (+) relationship only in Model 1, and housing transactions rate had a statistically significant negative (-) relationship in Model 2. The implications of the study were drawn as follows: First, the increase in the house diffusion ratio without growth in households and population suggests the increase of the probability of the vacancy occurrence in the area, and the higher the aged house rate, the higher the probability of the vacancy occurrence. Second, for the revitalization of housing transactions, it is necessary to have an investment inflow in the area for mid- to long-term development. Third, local extinction index has a significant relationship with vacant house rate, it is necessary to introduce a local revitalization policy from a long-term perspective for the permanence of the area.