• 대한원격탐사학회지
• /
• 제32권5호
• /
• pp.471-482
• /
• 2016

본 논문에서는 수계 영역의 감독 분류 성능을 향상시키기 위하여 블록 기반의 영상 분할과 수계 경계의 확장을 이용하는 수계 검출 방법을 제안한다. 초기 수계 영역을 추출하기 위하여 수계 훈련 지역의 Normalized Difference Water Index (NDWI) 및 Near Infrared (NIR) 밴드 영상의 분광 정보를 이용하여 Mahalanobis 거리 영상을 생성한다. Mahalanobis 거리 영상에 포함된 잡음 성분의 영향을 감소시키기 위해서 인접한 화소의 연결 강도에 의해 확산 계수가 제어되는 평균 곡률 확산을 적용한 후에 초기 수계 영역을 추출한다. 추출된 수계 영상을 같은 크기의 블록으로 분할한 후에 수계 경계에 속하는 수계 영역의 정보를 이용하여 수계 영역을 갱신한다. 수계 경계에 속하는 수계 영역과 수계 훈련 지역 사이의 통계적인 거리가 임계값 이하이면, 수계 영역 갱신을 반복적으로 수행한다. 제안한 알고리즘을 KOMPSAT-2 영상에 적용한 결과 블록 크기가 $11{\times}11$에서 $19{\times}19$사이인 경우에 overall accuracy는 99.47%에서 99.53%, Kappa coefficient는 95.07%에서 95.80%의 분류 정확도를 보였다.

• 한국환경보건학회지
• /
• 제21권3호
• /
• pp.107-114
• /
• 1995

To assess the contribution of automobile exhaust to indoor and outdoor levels of $NO_2$ around a major trunk road in Tokyo, $NO_2$ levels of 200 homes were measured at living rooms, kitchens and outdoor at each season, from the summer of 1990 to the spring of 1991, $NO_2$ level was measured for four days using diffusion $NO_2$ dosimeter. Outdoor $NO_2$ levels at each season and indoor $NO_2$ levels at seasons when heaters were not used decreased according to the distance from the roadside. The differences between $NO_2$ levels at zone I(within 20m from the roadside) and zone III(beyond 50m) was about 3 ppb. Automobile exhaust seemed to contribute to this difference. At seasons when heaters were used, indoor $NO_2$ levels of the homes equipped with vented heater, decreased according to the distance from the roadside. However, there was no correlation between indoor levels and the distance from the roadside at homes equipped with unvented heater.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 춘계 학술발표회 제16권1호
• /
• pp.842-845
• /
• 2004

When the concrete structures are in contact with seawater, concentration of chloride for estimating chloride diffusion coefficient can be defined as the chloride concentration of sea water. However, in case the concrete structures, constructed in the seashore, aren't directly in contact with seawater, it is difficult to establish the interface concentration of chloride. In addition, marine concrete structures are greatly affected by salt attack such as rebar corrosion, among the cause of salt attack, airborne sea salt is primary factor. Therefore, in this study, salt attack environment by airborne sea salt was investigated in terms of the distance from seashore at 33 spots, 6 areas in East, West, South coast for 1 year. Results indicated that airborne sea salt is decreased by $y=a{\cdot}x^{-b}$ equation to the distance from seashore.

• 대한전자공학회논문지SP
• /
• 제37권4호
• /
• pp.1-10
• /
• 2000

디지털 영상 출력 장치를 위해 연속 계조 영상을 이진 영상으로 변환하는 오차확산 방법은 사람의 시각 특성에 적합한 고주파 성분의 이진 영상을 만들어 내지만 균일하지 못한 점의 분포로 인해 영상의 화질을 저하시키는 패턴이 발생하게 된다. 이러한 단점을 해결하기 위해 다양하게 개선된 오차확산 방법들이 제안되었다. 본 논문에서는 우선 오차확산 방법이 균일한 점의 분포를 발생시키지 못하는 원인을 분석하고 주기함수를 이용하여 이진 문턱값을 조절함으로서 이진 영상의 점의 분포를 균일하게 하여 화질을 향상시키는 방법을 제안한다. 제안하는 방법은 이진 영상의 화질을 결정하는 소수 화소(minor pixels)가 주어진 계조에 따라 일정한 주거리(principal distance)를 갖도록 하여 이진 화소의 뭉침 현상이나 공백 현상을 최소화 하고 균일한 분포를 갖도록 한다.

• 대한기계학회논문집B
• /
• 제20권5호
• /
• pp.1671-1678
• /
• 1996

In external chemical vapor deposition processes including VAD and OVD the distribution of flame-synthesized silica particles is determined by heat and mass transfer limitations to particle formation. Combustion gas flow velocities are such that the particle diffusion time scale is longer than that of gas flow convection in the zone of particle formation. The consequence of these effects is that the particles formed tend to remain along straight smooth flow stream lines. Silica particles are formed due to oxidation and hydrolysis. In the hydrolysis, the particles are formed in diffuse bands and particle formation thus requires the diffusion of SiCl$\_$4/ toward CH$\_$4//O$\_$2/ combustion zone to react with H$\_$2/O diffusing away from these same zones on the torch face. The conversion kinetics of hydrolysis is fast compared to diffusion and the rate of conversion is thus diffusion-limited. In the language of combustion, the hydrolysis occurs as a Burke-Schumann process. In selected conditions, reaction zone shape and temperature distributions predicted by the Burke-Schumann analysis are introduced and compared with experimental data available. The calculated centerline temperatures inside the reaction zone agree well with the data, but the calculated values outside the reaction zone are a little higher than the data since the analysis does not consider diffusion in the axial direction and mixing of the combustion products with ambient air. The temperatures along the radial direction agree with the data near the centerline, but gradually diverge from the data as the distance is away from the centerline. This is caused by the convection in the radial direction, which is not considered in the analysis. Spatial distribution of silica particles are affected by convection and diffusion, resulting in a Gaussian form in the radial direction.

• 한국안전학회지
• /
• 제37권2호
• /
• pp.1-9
• /
• 2022

Most factories deal with toxic or flammable chemicals in their industrial processes. These hazardous substances pose a risk of leakage due to accidents, such as fire and explosion. In the event of chemical release, massive casualties and property damage can result; hence, quantitative risk prediction and assessment are necessary. Several methods are available for evaluating chemical dispersion in the atmosphere, and most analyses are considered neutral in dispersion models and under far-field wind condition. The foregoing assumption renders a model valid only after a considerable time has elapsed from the moment chemicals are released or dispersed from a source. Hence, an initial dispersion model is required to assess risk quantitatively and predict the extent of damage because the most dangerous locations are those near a leak source. In this study, the dispersion model for initial consequence analysis was developed with three-dimensional unsteady advective diffusion equation. In this expression, instantaneous leakage is assumed as a puff, and wind velocity is considered as a coordinate transform in the solution. To minimize the buoyant force, ethane is used as leaked fuel, and two different diffusion coefficients are introduced. The calculated concentration field with a molecular diffusion coefficient shows a moving circular iso-line in the horizontal plane. The maximum concentration decreases as time progresses and distance increases. In the case of using a coefficient for turbulent diffusion, the dispersion along the wind velocity direction is enhanced, and an elliptic iso-contour line is found. The result yielded by a widely used commercial program, ALOHA, was compared with the end point of the lower explosion limit. In the future, we plan to build a more accurate and general initial risk assessment model by considering the turbulence diffusion and buoyancy effect on dispersion.

• 한국유통학회지:유통연구
• /
• 제15권4호
• /
• pp.61-85
• /
• 2010

본 연구에서는 국내 대형할인점의 확산을 효과적으로 설명하기 위해 기업의 정보와 구매자의 구전으로 확산을 설명하는 Bass모형에 제3의 요소로 공간적 영향력을 고려하였다. 국내 대형할인점의 확산은 확산중심지인 서울경인지역에서 저차중심지인 4개 지역권역으로 확산되는 형태를 보임에 따라 공간적 영향이 중요하게 작용할 것으로 기대된다. 본 연구에서 공간적으로 구분된 시장 A(확산중심지)가 시장 B(저차중심지)에 미치는 영향이 완전히 통제되지 못하는 상황에서 시장 A가 시장 B에 미치는 공간적 영향을 다국가확산모형(multinational diffusion model)을 확장한 공간확산모형(spatial diffusion model)을 이용하여 정의하였다. Bass모형과 공간확산모형의 모수추정을 통해 두 가지 정보전달경로와 관련된 혁신계수와 모방계수로 확산을 설명하는 Bass모형보다 공간확산모형이 국내 대형할인점 확산을 더욱 효과적으로 설명하는 것으로 나타났다. 또한 혁신중심지인 서울경인과 4개 지역권역의 소매환경을 나타내는 개념적 거리에 따라 공간확산모형에서 공간적요인의 영향력이 달라질 것이 기대되어 공간확산계수와 소매환경변수간의 상관관계를 살펴보았고, 연구결과 확산중심지에서 저차중심지에 대한 공간적 영향력은 저차중심지의 소매환경이 확산중심지의 소매환경과 유사할수록 크다는 것을 밝혀내었다.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.382-388
• /
• 2004

The sizes and structures of micelles formed in aqueous solutions of cationic octadecyl trimethyl ammonium chloride (OTAC) and anionic ammonium dodecyl sulfate (ADS) surfactants were investigated using smallangle neutron scattering (SANS), self-diffusion coefficients by pulsed-gradient spin-echo (PGSE) NMR, and dynamic light scattering (DLS) methods. SANS and DLS data indicate that their structures are spherical at concentrations as high as 300 mM. As the total surfactant concentration increases, the peaks of SANS spectra shift to higher scattering vector and become sharper, indicating that the intermicellar distance decreases and its distribution becomes narrower. This is due to more compact packing of surfactant molecules at high concentrations. The intermicellar distance of around 100 ${\AA}$ above 200 mM corresponds approximately to the diameter of one micelle. The sizes of spherical micelles are 61 ${\AA}$ and 41 ${\AA}$ for 9 mM OTAC and 10 mM ADS, respectively. Also the self-diffusion coefficients by PGSE-NMR yield the apparent sizes 96 ${\AA}$ and 31 ${\AA}$ for micelles of 1 mM OTAC and 10 mM ADS, respectively. For ADS solutions of high concentrations (100-300 mM), DLS data show that the micelle size remains constant at $25{\pm}2{\AA}$. This indicates that the transition in micellar shape does not take place up to 300 mM, which is consistent with the SANS results.

• 한국진공학회지
• /
• 제19권3호
• /
• pp.190-198
• /
• 2010

450 mm의 웨이퍼 공정용 플라즈마 장비의 개발을 위하여 안테나 형상, 챔버의 직경, 웨이퍼까지의 거리에 따른 플라즈마 균일도를 Ar과 $CF_4$에 대하여 축대칭 2차원으로 수치 모델링하였다. 챔버의 종횡비를 직경, 기판까지의 거리, 배기구의 면적으로 나누어서 결정하고 여기에 안테나 구조를 변경하여서 최적의 플라즈마 균일도를 갖는 조건을 도출하였다. Drift diffusion식과 준중성 조건을 이용한 간략화를 이용하였으며 표면 재결합과 식각 반응을 이온에너지의 함수로 처리하였다. 반응기판 표면에서의 플라즈마 밀도 균일도는 기판 홀더와 챔버 벽면과의 거리, 기판과 소스와의 거리가 멀수록 좋아졌으며, 안테나의 디자인이 4 turn으로 1층인 경우, 두 번째, 네 번째 turn만 사용하여 전류비 1 : 4에서 기판표면에서의 플라즈마 균일도를 4.7%까지 낮출 수 있었다. Ar과 $CF_4$의 반경 방향으로 전자 온도 균일도 50%, 전자 밀도 균일도 19%의 차이가 있었다.

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.151-163
• /
• 2020

Grouting method is an effective way of reinforcing cracked rock masses and plugging water gushing. Current grouting diffusion models are generally developed for horizontal cracks, which is contradictory to the fact that the crack generally occurs in rock masses with irregular spatial distribution characteristics in real underground environments. To solve this problem, this study selected a cement-sodium silicate slurry (C-S slurry) generally used in engineering as a fast-curing grouting material and regarded the C-S slurry as a Bingham fluid with time-varying viscosity for analysis. Based on the theory of fluid mechanics, and by simultaneously considering the deadweight of slurry and characteristics of non-uniform spatial distribution of viscosity of fast-curing grouts, a theoretical model of slurry diffusion in an oblique crack in rock masses at constant grouting rate was established. Moreover, the viscosity and pressure distribution equations in the slurry diffusion zone were deduced, thus quantifying the relationship between grouting pressure, grouting time, and slurry diffusion distance. On this basis, by using a 3-d finite element program in multi-field coupled software Comsol, the numerical simulation results were compared with theoretical calculation values, further verifying the effectiveness of the theoretical model. In addition, through the analysis of two engineering case studies, the theoretical calculations and measured slurry diffusion radius were compared, to evaluate the application effects of the model in engineering practice. Finally, by using the established theoretical model, the influence of cracking in rock masses on the diffusion characteristics of slurry was analysed. The results demonstrate that the inclination angle of the crack in rock masses and azimuth angle of slurry diffusion affect slurry diffusion characteristics. More attention should be paid to the actual grouting process. The results can provide references for determining grouting parameters of fast-curing grouts in engineering practice.