• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1066-1067
• /
• 2004

New diffuser film for LCD backlight is developed. A diffuser film was manufactured through coating UV curable monomer on a plastic film. The diffuser layer coated on plastic film showed excellent optical transmittance.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1450-1452
• /
• 2009

In this work, a plastic diffuser which has a surface similar to Sinusoidal wave profile for application of LC D backlighting is proposed. This new pattern diffuser is achieved the values of the transmission efficiency an d diffusion efficiency all over 70%, and it also has the value about gain over 1.1. Additionally, this new patter n diffuser has high uniformity when we put it in the LCD backlight module and its thickness is only 2mm. With these foregoing properties, this diffuser film can widely applied to LCD displays systems etc.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.36-44
• /
• 2000

The flow at the impeller exit is important to validate engineering design and numerical analysis of pumps. We installed axisymmetric collector instead of the volute casing, so there is no interaction between the impeller and casing. A hot-film probe and a high response pressure transducer are used to investigate the flow at impeller exit and vaneless diffuser region for design and off design flow rate. For a single suction centrifugal pump of low specific speed, the flow field such as velocity, flow angle, and total pressure are measured by traversing the probe across the vaneless diffuser. These data can be used for performance prediction, design, and numerical analysis of pumps.

• 한국광학회지
• /
• 제32권5호
• /
• pp.220-229
• /
• 2021

눈부심 방지를 위한 확산판의 투과율과 연색지수 향상을 위한 양자점 필름의 농도가 고출력 직하형 백색 LED 조명의 광특성에 미치는 영향을 조사했다. 확산판의 투과율이 감소할 경우 조명의 휘도는 줄어들었고 색좌표, 상관색온도는 별다른 변화를 보이지 않았으며 연색지수는 약간 상승했다. 시야각에 따른 광특성의 편차는 거의 없었고 휘도 분포는 람버시안 분포에 가까웠다. 양자점 필름의 농도가 증가할 경우 스펙트럼 상 적색 성분이 늘어나면서 이 성분의 비중을 표현하는 색좌표 x가 증가했고 상관색온도는 약 6000 K에서 4000 K 부근으로 현저히 감소했다. 아울러 조명의 구조를 최적화하면 연색지수가 95까지 증가함을 확인했다. 이런 결과는 적절한 투과율의 확산판과 양자점 필름의 조합을 통해 눈부심이 없고 시야각에 따른 색편차가 거의 없으며 특히 색좌표의 가변이 가능한 고연색성의 조명 구현이 가능함을 보여준다.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1147-1155
• /
• 2002

Discharge flows from a centrifugal pump impeller with a specific speed of 150 [rpm, m$^3$/min, m] were experimentally investigated. A large axisymmetric collector instead of a volute casing was installed to obtain circumferentially uniform flow, i.e. without interaction of the impeller and the volute. The unsteady flow was measured at the impeller exit and vaneless diffuser using a hot film probe and a pressure transducer. The flow at impeller exit showed pronounced jet-wake flow patterns. The wake, which was on the suction/hub side at high flow rate, became enlarged pitchwisely on both the hub and the shroud side as the flow rate decreases. The pitchwise non-uniformity of the flow rapidly decreased along the downstream and the non-uniformity almost disappeared at radius ratio of 1.18 for medium flow rate. The mean vaneless diffuser flow was reasonably predicted using a one dimensional analysis when an empirical constant was used to specify the skin friction coefficient. The data can be used for a centrifugal pump impeller design and validation of CFD codes and flow modeling.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.

• 한국산학기술학회논문지
• /
• 제18권12호
• /
• pp.793-798
• /
• 2017

현대의 함정에서는 추진 기관에서 생성된 고온의 폐기가스와 가열된 폐기관의 금속표면온도를 저감하기 위해 적외선 신호저감 장치(Infra-red Signature Suppression system, IRSS)를 설치하고 있다. 국내 함정에 탑재된 일반적인 IRSS는 이덕터, 믹싱튜브 그리고 디퓨져로 구성되며, 이 중 디퓨져는 금속표면에 내기 외기의 압력차에 의한 공기 막을 생성시켜 온도를 저감시키는 역할을 한다. 본 연구에서는 국외 선진 기술사에서 설계한 IRSS의 디퓨져 형상을 분석하여 설계 변수를 선정하였으며, 분석 조건을 줄이면서 설계 변수의 특성을 효과적으로 파악 할 수 있는 다구치 실험계획법을 통해 IRSS 디퓨져의 성능에 영향을 미치는 설계 변수의 특성을 검토하였다. 디퓨져의 성능분석에는 선행 연구에서 정립한 열 유동해석 기술을 활용하였다. IRSS의 성능평가에는 함정 적외선 신호의 세기와 직접적으로 관련되는 디퓨져 출구에서의 폐기가스 온도와 금속표면온도의 면적평균 값을 기준으로 하였으며, 폐기가스의 온도는 디퓨져 출구의 직경 변화에 크게 영향을 받고, 디퓨져 금속표면의 온도는 디퓨져 링의 개수 변화에 크게 영향 받음을 확인하였다.

• 설비공학논문집
• /
• 제17권6호
• /
• pp.544-551
• /
• 2005

The flow characteristics have been numerically investigated for various shapes of the diffuser/nozzles which are used for a valveless micro-pump. The important parameters considered in this study are the throat width ($15\~120\mu$m), the taper angle ($3.15\~25.2^{\circ}$), and the diffuser length ( $600\~4,800\mu$m), and the size of the middle chamber ($1\~16mm^2$). To find the optimal values for these parameters, steady state calculations have been performed assuming the constant pressure difference between the inlet and exit of the flow For the taper angle and the throat width, it is found that there exists an optimum at which the net flow rate is the greatest. The optimal taper angle is in the range of $10\~20^{\circ}$ for all the pressure differences; and the throat width indicates an optimal value near $75\mu$m for the case of 35 kPa pressure difference. The net flow rate is also influenced by the size of the middle chamber. With decreasing chamber size, the net flow rate is reduced because of the interference between two streams flowing into the middle chamber. The unsteady pulsating flow characteristics for a micro-pump with a given diffuser/nozzle shape have been also investigated to show the validity of the steady state parametric study.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.311-314
• /
• 2003

Holographic diffuser(HD) layer was demonstrated to be located inside LC cell for a transmissive LCD of TFT-array on Color Filter structure. Master pattern of this layer was generated by holographic method and this pattern was replicated by the stamping of the master pattern on UV resin. Combined with a compensation film, TN-mode LCD with this layer showed improved viewing angle characteristics, especially along the up-down direction.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2004년도 하계학술발표 논문집
• /
• pp.173-173
• /
• 2004