• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.107-113
• /
• 2013

Problem solving and/or decision making process usually encountered in human living consists of a sequence of human behaviors based upon his/her knowledge. Thus, Rasmussen introduced Skill-Rule-Knowledge paradigm to countermeasure human errors that can occur in Nuclear Power Plants. Unfortunately however, it was not so easy as expected since objective evidence have not been obtainable with conventional research techniques. With the help of EEG band pawer ratio techniques, this study tried to get psycho-physiological symptoms of human errors, if any, while human beings perform knowledge-based behaviors such as simple arithmetic computations with different difficulty level. A set of simulated works was carried out with a computer station. Four kinds of arithmetic computation tasks were given to 10 health male under-graduate students on different day individually, and during the experiment, EEG and ECG was measured continuously for objective psycho-physiological analysis. According to the results, ${\alpha}$/(${\alpha}+{\beta}$) as well as ${\alpha}/{\beta}$ band power ratio were sensitive to task difficulty level which consistently decreased both. However, any one of them failed to reveal the influence of tasks with different difficulty level in the aspect of task duration time. On the contrary, Heart Rate Variability was more suggestive than expected. To make a conclusion, it can be said that band power of EEG waves will be helpful in not only assessment of work difficulty level but also assessment of workers' skill development if supported by cardiac function such as HRV.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.217-222
• /
• 1994

This paper describes the determination of optimal initial billet size for axisymmetric cold forging products using neural networks. The determination of optimal initial billet size is very important in forging design and forming sequence design, because the result of such designs and forming load can be different by variable initial billet sizes. The forming difficulty has been defined as the degree of difficulty in forming by 3 process ' forward extrusion, backward extrusion and upsetting. By neural networks a forming difficulty can be determined with the ratio of shape and forming process. From the graph of maximum, minimum, and average forming difficulties by variable billet sizes, the optimal billet size can be determined. The initial billets of a solid part and a hollow part whichwas determined by this study are compared with the sequence drawing generated by the one of forming sequence design system.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1223-1231
• /
• 2018

The direct torque control (DTC) scheme features a simple structure thanks to stator flux-oriented control. It has the advantage of robustness against motor parameters variation since only the stator resistance is involved in the control scheme. On the other hand, the disadvantage of DTC is large torque ripple. To reduce the torque ripple, many studies on DTC-space vector modulation (DTC-SVM) schemes, which modulate the duty ratio with a fixed switching cycle, have been proposed. However, there is the difficulty in obtaining the duty ratio for DTC-SVM. Hence, this paper proposes a new duty ratio selection and stator flux calculation methods for reducing torque ripple. Simulations and experiments were carried out to determine the validity of the proposed method. The proposed scheme has simplified the duty ratio command and achieved the same control performance as the conventional duty ratio modulation method without using the information of motor parameters.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2003.03a
• /
• pp.733-740
• /
• 2003

When SCP (Sand Compaction Pile) is used in the improvement of soft ground, some problems like the difficulty of vertical construction and other construction difficulties due to the use of high pressure are encountered, There is a possibility that the strength parameters used in the design may be different with those obtained from the investigation of the quality variation with depth for the irregular, then the section may be not a sand pile but a combination of sand and clay. The mixture ratio concept is used, it is defined as the quantity of sand corresponding to the replacement ratio. Using this concept, the strength parameter relationship of the replacement and mixture ratio was determined. The use of these parameters in the design of SCP is most appropriate.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.2
• /
• pp.46-53
• /
• 1988

Effect of Notch Shape and Hardness Ratio on Characteristics of Impact Fracture in Dual Phase Steels. In this study, it is investigated the effect of notch shape and hardness ratio on the characteristics of impact fracture in dual phase steels. The impact test was carried out at the temperature range from -40.deg. C to room temperature with Instrumented Charpy Impact Tester. The main results obtained are as follows; 1, The maximum impact bending strength (.sigma.$_{max}$) increases with the tensile strength. Also, the impact energy depends on .sigma.$_{max}$. 2, In room temperature, the impact energy depends on crack-initiation energy (E$_{i}$) in case of the high hardness ratio (R=3.4), whereas depends on crack-propagation energy (E$_{p}$) in case of the low hardness ratio (R=1.8) and the dependence of crack-initiation energy of the impact characteristics decreases with increasing test temperature. These phenomena are result from the difficulty of cleavage facet formation.ion.ion.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.200-201
• /
• 2014

The construction industry in recent years, due to the multi-species engineering specialty, interest and importance of human resource management is growing. But, not many studies on the operation ratio are being proceeded due to the difficulty of casting people on site and actual survey. Thus, this study proposes the work type-specific quantitative operation ratio through work type-specific operation ratio analysis of reinforced concrete construction which takes up an important part of construction work.

• Industrial Engineering and Management Systems
• /
• v.13 no.2
• /
• pp.203-209
• /
• 2014

This research designed and implemented a supply chain risk management platform and applied it to a case study of reduced-fat Lanna pork sausage as a new product development project. The proposed framework has three stages: risk identification, risk assessment, and risk mitigation. Seventeen risk agents with 17 risk events were identified based on SWOT analysis and the Porter Five Forces concept through the process of planning, sourcing, making and delivering, partially captured from the supply chain operations reference model in the first stage. In the second stage, an house of risk (HOR) framework was applied to present the impacts of each risk agent. In the third stage, eight risk agents with high impact were selected to design 21 preventive actions. Finally, three preventive actions with the highest effectiveness to difficulty ratio scores-'sales evaluation of familiar products', 'increasing distribution channels and promotions to improve sales', and 'work flow improvement for work safety'-were then recommended for this new product development.

• Journal of Veterinary Science
• /
• v.23 no.2
• /
• pp.38.1-38.13
• /
• 2022

Background: Minimally invasive surgery (MIS) technique of sacroiliac luxation in toy breed dogs using cannulated screws has not been described. Objectives: The purpose of this study was to evaluate the effectiveness of pelvic canal recovery, the reproducibility of successful surgery outcomes, and the acceptable difficulty of the procedure in MIS of sacroiliac luxation in toy breed dogs. Methods: MIS using 2.3-mm cannulated screws was demonstrated in 12 toy breed dog cadavers with sacroiliac luxation artificially induced. Pre and postoperative radiographs were used to evaluate the pelvic canal diameter ratio (PCDR), hemipelvic canal width ratio (HCWR), and reduction rate. Dorsoventral angle (DVA) and craniocaudal angle (CCA) of the inserted screw were obtained postoperative computed tomographic scan. Results: The statistically significant difference between the mean pre and postoperative PCDR was found (1.10 ± 0.12 and 1.26 ± 0.11, respectively; p = 0.002), and the mean HCWR close to 1.0 meaning symmetric pelvis also was obtained (0.97 ± 0.07). The mean DVA and CCA were 2.26° ± 1.33° and 2.60° ± 1.86°, respectively. Conclusions: MIS of sacroiliac luxation using 2.3-mm cannulated screws is applicable to toy breed dogs with acceptable difficulty.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.71-78
• /
• 2009

During a learning process, a human being is assumed to experience knowledge-based behaviors, rule-based behaviors, and skill-based behaviors sequentially if Rasmussen was right. If any psycho-physiological symptom to those different levels can be obtained, it can be useful as a measure whether a human being is fully trained and has gotten a skill in his work. Therefore, this study aimed to draw relationships between human performance measures and psycho-physiological measures while committing a computer-simulated pointing task by utilizing the power spectrum technique of EEG data, especially with the ratio of relative beta-to-alpha band power. The result showed that, during correct responses, the ratio came to stabilize as all the performance data went stable. However, response time was not a simple linear function of task difficulty level only, but a joint function of task characteristics as well as behavior levels. Comparing relative band power ratios from errors and correct responses, activated states of one's brain could be explained, and characteristics of the task could understood. To tell that of pointing task, correlations around C3, C4, P3, P4 and 01, 02 area were significant and high in correct response cases whereas most correlation coefficients went down in error cases standing for imbalance of psycho-motor functions. Though task difficulty was the only one factor that could influence on relative band power ratio with statistical significance, it should be comprehended to mean a different way of expression indicating task characteristics since at least error-some situation could be explained with the help of relative band power ratio that absolute band power failed.

• Journal of Korean Academy of Nursing
• /
• v.45 no.1
• /
• pp.107-117
• /
• 2015

Purpose: The purpose of this study was to evaluate the psychometric properties of the Korean version of the Alzheimer's Disease Knowledge Scale (ADKS-K) to determine its applicability to Korean adults. Methods: Cross-cultural validity was performed according to Consensus-based Standards for the Selection of Health Measurement Instruments (COSMIN). The Kuder-Richardson Formula 20 for internal consistency and Intraclass Correlation Coefficient (ICC) for test-retest reliability were conducted. Content validity, criterion related validity and construct validity were evaluated. The Classical Test Theory (CTT) model and the Item Response Theory (IRT) model were applied in performing the item analysis. Results: The KR 20 was .71, and the ICC was .90, indicating that the ADKS-K has internal consistency and stability reliability. Thirty items of the ADKS-K had significant Content Validity Ratio (CVR) values, i.e., mean of 0.82 and range of 0.60~1.00. Mean item difficulty and discrimination indices calculated by TestAn program were 0.63 and 0.23, respectively. Mean item difficulty and discrimination indices calculated by BayesiAn program were -0.60 and 0.77, respectively. These tests indicate that ADKS-K has an acceptable level of difficulty and discriminating efficiency. Conclusion: Results suggest that ADKS-K has the potential to be a proper instrument for assessing AD knowledge in Korean adults.