• 한국학교수학회논문집
• /
• 제2권1호
• /
• pp.93-104
• /
• 1999

The subject of this study was the graph of relation of direct inverse proportion, linear function and quadratic function in the 1st, 2nd and 3rd grade of current middle school mathematics curriculum. GSP materials were developed to simplify the principle, trait and characteristics of graphs and make them easier to understand. The overall aim of the materials is to improve the effectiveness of teaching and learning through the utilization of enhanced students' practice. Additionally, the use of the GSP will be useful in the development of mere effective materials. The effectiveness of the GSP materials will be as followings. 1. The step by step approach of GSP materials through computer interaction will enhance students motivation and interest in mathematics. 2. By presenting the subject matter simply and in a variety of ways, difficult concepts can be understood without the use of complex mathematical calculation. 3. The GSP program is different from CAI and other software programs. It should be used only after learning how to input and output data.

• 한국재료학회지
• /
• 제32권12호
• /
• pp.528-532
• /
• 2022

Recently, the necessity of designing and applying tool materials that perform machining of difficult-to-cut materials in a cryogenic treatment where demand is increasing. The objective of this study is to evaluate the performance of cryogenically treated WC-5 wt% NbC hard materials fabricated by a pulsed current activated sintering process. The densely consolidated specimens are cryogenically exposed to liquid nitrogen for 6, 12, and 24 h. All cryogenically treated samples exhibit compressive stress in the sintered body compared with the untreated sample. Furthermore, a change in the lattice constant leads to compressive stress in the specimens, which improves their mechanical performance. The cryogenically treated samples exhibit significant improvement in mechanical properties, with a 10.5 % increase in Vickers hardness and a 60 % decrease in the rupture strength compared with the untreated samples. However, deep cryogenic treatment of over 24 h deteriorates the mechanical properties indicating that excessive treatment causes tensile stress in the specimens. Therefore, the cryogenic treatment time should be controlled precisely to obtain mechanically enhanced hard materials.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.388-392
• /
• 1995

The Electronic Speckle Pattern Interferometry(ESPI) has been applied to many technical problems such as deformation and displacement measurement, strain visualization and surface roughness monitoring. Composite materials have various complicated characteristics depending on the ply materials,ply orientations,ply stacking sequences and boundary conditions. Therefore, it is difficult to analyze composite material. For efficient use of composit materials in engineering applications, the dynamic behavior such as, natural frequencies and modal patterns should be identified. This studying presents FEM results for the free vibration of symmetrically laminated composite as [30/-30/90] $_{s}$. The natural frequencies of laminated composite rectangular plates having the boundary condition(:2-edge clamped) are experimentally obtained. In order to demonstrate the validity of the experiment,FEM analysis using ANSYS was performed and natural frequencies experimentally obtained is compared with calculated by FEM analysis. The results obtained from both experiment and FEM analysis show a good agreement.t.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.317-319
• /
• 2008

Photo-alignment layer which contains cinnamate is difficult to generate pretilt angle of liquid crystals. In order to enhance pretilt angle, blending poly (amic acid) between containing fluorine poly (amic acid) and 1,2,3,4-cyclobutanetetracaroxylic dianhydride (CBDA) / 3,5-diaminobenzyl alcohol (DBA) were used. For photoreaction, cinnamate was conjugated by interfacial reaction with blending polyimide.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.3-9
• /
• 1995

Several piping material test methods have been developed as a result of advances in elastic-plastic fracture mechanics. It's known that, crack propagation of the materials strongly governed by the $J_{Ic}$ value. But the value is still difficult to be obtained because of it's complicate and troble-some determination process. In this paper, to prove the validity of the developed test procedure a series of tests were peformed at various temperatures and for different material directions. directions.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.211-221
• /
• 2019

Numerical modeling of reinforced concrete structures is a difficult engineering problem, primarily because of the material inhomogeneity. The behaviour of a concrete element with reinforcement can be analyzed using, for example, the Barcelona model, which according to the literature, is one of the most suitable models for this purpose. This article compares the experimental data obtained for an orthotropic concrete slab band system with those predicted numerically using Concrete Damage Plasticity model. Abaqus package was used to perform the calculations.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.951-954
• /
• 2000

This paper presents a new cutting method, i.e. diamond cutting, aided by electrolysis, in order to cut ferrous materials with diamond tools. Diamond cutting is widely applied in manufacturing ultraprecision parts such as magnetic disk, polygon mirror, spherical/non-spherical mirror and copier drum, etc. because of the diamond tool edge sharpness. In general, however, diamond cutting cannot be applied to cutting steels, because diamond tools wear excessively in cutting iron based materials like steel due to their high chemical interaction with iron in high temperature. In order to suppress the diffusion of carbon from the diamond tool and to reduce increase of cutting force due to size effect, we attempt to change chemically the compositions of iron based materials using electrolysis in a limited part which will be soon cut. Through experiments under several micro-machining and electrolysis conditions, cutting using electrolysis, compared to conventional cutting, was found to result in a great decrease of the cutting force, a better surface and much less wear tool.

• 무역상무연구
• /
• 제72권
• /
• pp.115-137
• /
• 2016

Trade can be greatly influenced by the change of international trade environment due to the characteristics of remote transactions. Furthermore, in the circumstance of emphasizing the national security again, the importance of the risk management of special materials has been increasing. As it was noted at Chapter 4, significant results such as the threat of enterprises' sustainable growth can be occurred when companies are related to the unlawful export of strategic materials or experience discouragement of export of main products. As the decision of strategic materials greatly depend on a specialized knowledge there is a possibility of misjudgement of strategic materials in terms of ordinary companies which is not accustomed to them. Furthermore risk management is more difficult due to the inclusion to the items of export license. To prepare such a risk of export of strategic materials, firstly, it should be checked to find whether counter traders are working in the industry which is not related to the spread of weapons of mass destruction, secondly, an appropriate process shall be designed and operated for products to be safely delivered to the trade counter. Therefore, our export enterprises have to introduce CP(Compliance Program), AEO or ISO28000 considering suitability for their actual situations not only to promote export and but also to avoid risk of export control and additional expenses. Through these appropriate processes, an efficient and effective management of the trade risk of strategic materials can be accomplished.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.642-646
• /
• 2006

본 연구는 생산 공정의 입출고관리시스템에 관한 연구이다. 기존의 자재 관리 시스템은 바코드를 이용하는 경우가 많지만 대부분의 업체는 많은 불편함을 호소하고 있다. RFID 기술을 입출고관리시스템에 적용하면 자재의 정보를 효율적으로 관리할 수 있고 수작업의 감소로 인해 시간과 비용을 절약할 수 있다. 본 연구는 생산 공정의 입출고관리시스템을 위해 입고 프로세서, 출고 프로세서, 제고 프로세서, 자재소요량프로세서를 설계하였다. 이러한 프로세서를 검증할 수 있도록 사용자 입장에서 평가하여 검증한다.

• Applied Microscopy
• /
• 제46권2호
• /
• pp.110-115
• /
• 2016

Transmission electron microscopy (TEM) is a powerful tool for analyzing a broad range of materials and provides localized information about the microstructure. However, the analysis results are strongly influenced by the quality of the thin foil specimen. Sample preparation for TEM analysis requires considerable skill, especially when the area of interest is small or the material of interest is difficult to thin because of its high hardness and its mechanical instability when thinned. This article selectively reviews recent advances in TEM sample preparation techniques using a tripod polisher. In particular, it introduces two typical types (fl at type and wedge type) of TEM sample preparation and the benefits and drawbacks of each method; finally, a method of making better samples for TEM analysis is suggested.