• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.988-993
• /
• 2003

This paper presents the application of the technique of differential transformation of free vibration of membrane. Numerical calculations are carried out and compared with previously published results. The results obtained by the present method agree very well with those reported in the previous works. The present analysis shows the usefulness and validity of differential transformation in solving a solid and annular circular membranes problem of the responses of the free vibration.

• 한국입자에어로졸학회지
• /
• 제10권1호
• /
• pp.33-43
• /
• 2014

A differential mobility analyzer (DMA) has been widely used as a standard tool for classifying nanoparticles with a certain size. More recently, several new types of DMA have been tested in an attempt to produce size-monodisperse nanoparticles. It is a bit surprise to see how simple the working theory of the DMA is. Although the theory was demonstrated quite successful, no one can guarantee whether the theory still works in another geometry of the DMA. In this regard, we first investigated the validity of the theory under various working conditions and then moved to check the validity upon minor change in its design. For the valid test, we compared the results with those obtained from a computational fluid dynamics.

• KEPCO Journal on Electric Power and Energy
• /
• 제6권4호
• /
• pp.473-480
• /
• 2020

In this paper, we proposed a high frequency equivalent circuit considering parasitic impedance components for differential noise analysis on the input stage during DC-DC buck converter switching operation. Based on the proposed equivalent circuit model, we presented a method to measure parasitic impedance parameters included in DC bus plate, IGBT, and PCB track using the gain phase method of a network analyzer. In order to verify the validity of this model, a DC-DC prototype consisting of a buck converter, a signal analyzer, and a LISN device, and then resonance frequency was measured in the frequency range between 150 kHz and 30 MHz. The validity of the parasitic impedance measurement method and the proposed equivalent model is verified by deriving that the measured resonance frequency and the resonance frequency of the proposed high frequency equivalent model are the same.

• 충청수학회지
• /
• 제32권4호
• /
• pp.409-420
• /
• 2019

In this article, we discussed semi-analytical approximated methods for solving mixed Volterra-Fredholm integro-differential equations, namely: Adomian decomposition method and modified Adomian decomposition method. Moreover, we prove the uniqueness results and convergence of the techniques. Finally, an example is included to demonstrate the validity and applicability of the proposed techniques.

• 한국멀티미디어학회논문지
• /
• 제19권6호
• /
• pp.1014-1023
• /
• 2016

In this study, we presented a method for non-square Differential LBP operation that can well describe the micro pattern in the horizontal and vertical component. We proposed a way to represent a LBP operation with various direction components as well as the diagonal component. In order to verify the validity of the proposed operation, Differential LBP was investigated with respect to accuracy, sensitivity, and specificity for the classification of facial expression. In accuracy comparison proposed LBP operation obtains better results than Square LBP and LBP-CS operations. Also, Proposed Differential LBP gets better results than previous two methods in the sensitivity and specificity indicators 'Neutral', 'Happiness', 'Surprise', and 'Anger' and excellence Differential LBP was confirmed.

• Journal of applied mathematics & informatics
• /
• 제6권3호
• /
• pp.697-726
• /
• 1999

In this paper we develop a now procedure to control stepsize for linear multistep methods applied to semi-explicit index 1 differential-algebraic equations. in contrast to the standard approach the error control mechanism presented here is based on monitoring and contolling both the local and global errors of multistep formulas. As a result such methods with the local-global stepsize control solve differential-algebraic equation with any prescribed accuracy (up to round-off errors). For implicit multistep methods we give the minimum number of both full and modified Newton iterations allowing the iterative approxima-tions to be correctly used in the procedure of the local-global stepsize control. We also discuss validity of simple iterations for high accuracy solving differential-algebraic equations. Numerical tests support the the-oretical results of the paper.

• 대한전자공학회논문지SD
• /
• 제41권7호
• /
• pp.31-36
• /
• 2004

Vortical-Cavity Surface-Emitting Laser(VCSEL)는 in-plane 형태의 레이저와는 달리 여러 층의 distributed Bragg reflector(DBR) mirror를 반사 면으로 사용하기 때문에 광출력이나 미분양자효율(differential quantum efficiency)을 계산하는 데에 많은 어려움이 따른다. 이러한 이유로 광출력, 광출력 비 및 미분양자효율 등의 성능 지수를 계산하는 방법으로 유효 공진기 모델과 전달행렬 방법(transfer matrix method) 등이 사용되고 있다. 유효 공진기 모델은 반사율 및 문턱이득을 계산하는 데에는 적합하지만 광출력, 광출력 비 및 외부양자효율을 계산하는 데에는 오차를 보인다. 그 이유는 유효 공진기 모델이 금속 전극 개구부 바로 아래 GaAs 층에서의 빛의 흡수는 고려하지 못하기 때문이다. 이 논문에서는 유효 공진기 모델로부터 구한 성능 지수 값들을 전달행렬 방법으로부터 구한 값들과 비교ㆍ검토하여, 유효 공진기 모델의 타당성에 대하여 살펴보고 전달행렬 방법의 유용성을 재확인하였다.

• 여성건강간호학회지
• /
• 제27권2호
• /
• pp.69-74
• /
• 2021

측정도구의 구조타당도는 내용타당도 이후 가장 먼저 수행되어야 할 측정 속성이다. 이를 위해 국내 간호학에서는 주로 CFA를 사용하는데, CFA로 얻을 수 없는 정보들을 제시하는 IRT/라쉬 분석도 같이 적용해 볼 것을 추천한다. 구조타당도 이외에 내적일관성 및 교차문화타당도/측정동일성 또한 측정도구의 내적구조를 확인하기 위한 것이다. 국내 간호학 측정도구 연구에서 교차문화타당도/측정동일성에 대한 검증은 거의 찾아볼 수 없는 상황이다. 따라서 앞으로는 이에 대한 평가도 시행되기를 바란다.

• 제어로봇시스템학회논문지
• /
• 제19권12호
• /
• pp.1145-1151
• /
• 2013

Kinematic modeling is a prerequisite for motion planning and the control of mobile robots. In this paper, we proposed a new method of kinematic modeling for a type of mobile robot based on differential motion transformation. The differential motion implies a small translation and rotation in three-dimensional space in a small time interval. Thus, transformation of the differential motion gives the velocity relationship, i.e., Jacobian between two coordinate frames. Since the theory of the differential motion transformation is well-developed, it is useful for the systematic velocity kinematic modeling of mobile robots. In order to show the validity for application of the differential motion transformation, we obtained velocity kinematic models for a type of exemplar mobile robot including spherical ballbots.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1998년도 춘계학술대회논문집; 용평리조트 타워콘도, 21-22 May 1998
• /
• pp.392-398
• /
• 1998

In order to check the validity of nonlinear normal modes of continuous, systems by means of the energy-based formulation, we consider a beam with a nonlinear boundary condition. The initial and boundary e c6nsl of a linear partial differential equation and a nonlinear boundary condition is reduced to a linear boundary value problem consisting of an 8th order ordinary differential equations and linear boundary conditions. After obtaining the asymptotic solution corresponding to each normal mode, we compare this with numerical results by the finite element method.