• 제목/요약/키워드: Differential Signal

검색결과 741건 처리시간 0.033초

Comparison of Absolute and Differential ECT Signals around Tube Support Plate in Steam Generator

  • Shin, Young-Kil;Lee, Yun-Tai;Song, Myung-Ho
    • 비파괴검사학회지
    • /
    • 제25권3호
    • /
    • pp.201-208
    • /
    • 2005
  • In this paper, absolute and differential eddy current signals from various defects in the steam generator tube are numerically predicted and their signal slope characteristics are investigated. The signal changes due to frequency increase are also observed. After studying signal patterns from various defects and frequencies, the analysis of mixed defect signals affected by the presence of a ferromagnetic support plate is attempted. For the signal prediction, axisymmetric finite element modeling is used and this leads us to the slope angle analysis of the signal. Results show that differential signals are useful for locating the position of a defect under the support plate, while absolute signals are easy to presume and interpret even though the effect of support plate is mixed. Combined use of these two types of signals will help us accomplish a more reliable inspection.

Efficient Signature-Driven Self-Test for Differential Mixed-Signal Circuits

  • Kim, Byoungho
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제16권5호
    • /
    • pp.713-718
    • /
    • 2016
  • Predicting precise specifications of differential mixed-signal circuits is a difficult problem, because analytically derived correlation between process variations and conventional specifications exhibits the limited prediction accuracy due to the phase unbalance, for most self-tests. This paper proposes an efficient prediction technique to provide accurate specifications of differential mixed-signal circuits in a system-on-chip (SoC) based on a nonlinear statistical nonlinear regression technique. A spectrally pure sinusoidal signal is applied to a differential DUT, and its output is fed into another differential DUT through a weighting circuitry in the loopback configuration. The weighting circuitry, which is employed from the previous work [3], efficiently produces different weights on the harmonics of the loopback responses, i.e., the signatures. The correlation models, which map the signatures to the conventional specifications, are built based on the statistical nonlinear regression technique, in order to predict accurate nonlinearities of individual DUTs. In production testing, once the efficient signatures are measured, and plugged into the obtained correlation models, the harmonic coefficients of DUTs are readily identified. This work provides a practical test solution to overcome the serious test issue of differential mixed-signal circuits; the low accuracy of analytically derived model is much lower by the errors from the unbalance. Hardware measurement results showed less than 1.0 dB of the prediction error, validating that this approach can be used as production test.

2 Drop 구조를 가지는 Differential Pair의 Impedance 해석 및 설계 방안 (Optimized Design Technique of a Differential Pair Having 2 Drop Configuration through Impedance Analysis)

  • 배민지;김윤정;최웅;양국보;김영수
    • 한국전자파학회논문지
    • /
    • 제20권2호
    • /
    • pp.193-199
    • /
    • 2009
  • 본 논문에서는 microstrip line 구조를 가지는 differential pair의 2 drop 구조에 대한 임피던스 해석을 reflection theory를 바탕으로 분석하였다. 또한 시뮬레이션을 통한 transient 해석을 통해 임피던스 해석의 타당성을 검증하였다. 위와 같은 해석 과정을 통하여 다양한 drop 구조의 신호 전달 특성을 이해할 수 있다. 임피던스 해석을 바탕으로 2 drop 구조 해석을 통하여 최적의 signal integrity를 가지는 설계 기법을 제안하였고, circuit 시뮬레이션 해석(Ansoft designer)을 통해 signal integrity 효과를 검증하였다.

변류기 포화 곤단 알고리즘으로 억제된 모선보호용 비율 전류차동 계전방식 (A Percentage Current Differential Relaying Algorithm for Bus Protection Blocked by a CT Saturation Detection Algorithm)

  • 강용철;윤재성
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제52권1호
    • /
    • pp.44-49
    • /
    • 2003
  • This paper describes a percentage current differential relaying algorithm for bus protection blocked by a CT saturation detection algorithm. The detection algorithm blocks the output of a current differential relay only if a differential current is caused by CT saturation in the case of an external fault. Moreover, if a current differential relay operates faster than the detection algorithm, the blocking signal is not ignited. On the other hand. if the detection algorithm operates faster than a current differential relay, the output of the relay is blocked. The results of the simulation show that the proposed algorithm can discriminate internal faults from external faults ever when a CT is saturated in both cases. This paper concludes by implementing the algorithm into the TMS320C6701 digital signal processor. The results of hardware implementation are also satisfactory The algorithm can not only increase the sensitivity of the current differential relay but Improve the stability of the relay for an external faults.

차동검출기를 이용한 무선광연결에서 신호대잡음비의 개선 (Signal to Noise Improvement in Optical Wireless Interconnection Using A Differential Detector)

  • 이성호;강희창
    • 한국전자파학회논문지
    • /
    • 제10권1호
    • /
    • pp.54-62
    • /
    • 1999
  • 본 논문에서는 실내 무선광연결에 사용될 수 있는 차동검출기에서 잡음광의 결합비와 차동이득비에 따른 신호대 잡음비의 개선에 대하여 분석하고 실험하였다. 차동검출기는 2개의 포토다이오드와 1개의 차동증폭기 로 이루어지며, 차동이득비가 잡음광의 결합비와 같을 때 잡음광이 소거되어 약 20 dB의 선호대잡음비를 개 선하였다. 차통검출기는 실내의 무선광연결에서 주변의 강한 잡음광의 영향을 개선하거나 인접된 채널광에 의한 혼선의 영향을 없애는 데에 매우 효과적이다. 이 방법은 선호광과 유사한 파장의 잡음광이 발생하는 경 우에도 잡음개선효과가 았다.

  • PDF

차동 임피던스 분석을 사용한 SATA 커넥터의 신호 전달 특성 개선 (Signal Transmission Properties Improvement of Serial Advanced Technology Attachment Connector Using Analysis of Differential Impedance)

  • 양정규;김문정
    • 전자공학회논문지
    • /
    • 제50권2호
    • /
    • pp.47-53
    • /
    • 2013
  • 본 논문에서는 SATA(Serial Advanced Technology Attachment) 커넥터의 차동 임피던스 계산 방법을 적용하여 설계 변경 방법을 제안하고 신호 전달 특성을 개선하였다. 3차원 FEM(Finite Elements Method) 전자기장(Electromagnetic Field) 시뮬레이터를 이용하여 SATA 커넥터의 차동 모드 S-파라미터를 계산하고, 신호 전달 특성을 분석한다. 차동 임피던스는 Odd mode 임피던스를 이용하여 계산되므로 인덕턴스, 커패시턴스, 상호 인덕턴스, 상호 커패시턴스 값이 필요하다. 따라서 시뮬레이터를 이용하여 SATA 커넥터의 각각의 값을 추출하여 차동 임피던스를 계산하였고, 이 값은 $107.3{\Omega}$으로 설계 사양을 만족하지 못하였다. 신호 전달 특성 개선을 위해서 SATA 커넥터의 핀을 $d_x$, $d_y$ 방향으로 설계 변경하고, 각 경우의 신호 전달특성과 차동 임피던스를 분석하였다. $d_y=0.1mm$의 경우에서 신호 전달 특성이 가장 우수하게 나타났고, 차동 임피던스가 $98.7{\Omega}$으로 정합되었다. 이때, 반사손실은 1.5 GHz에서 15 dB 개선되었다.

Differential Demodulation of GMSK in Rayleigh fading Channels

  • Choi, Joong-Ho;Han, Young-Yeul
    • 한국통신학회논문지
    • /
    • 제16권2호
    • /
    • pp.137-144
    • /
    • 1991
  • A new demodulation scheeme for differentially encoded GMSK signal is introduced and described. In the proposed differential detection method, the signal is sampled at the center of the time slot, at which the effect of the intersymbol interference is relatively smaller than the edge of the time slot. The proposed differential detector takes this adbantate. The error rate performance of the differential detector has been numerically calculated in the fast fading encountered in the land mobile radio channels. A comparison of performance with the differential detector for MSK signal is given. Finally the possibility of improving performance employing nonredudant error correction is studied.

  • PDF

대칭구조를 갖는 고차의 미분 에너지함수를 이용한 순간진폭 및 순간주파수 추정기 (Instantaneous Amplitude and Frequency Estimator Using the Symmetric Higher Order Differential Energy Operator)

  • 임병관
    • 전기학회논문지
    • /
    • 제61권8호
    • /
    • pp.1193-1198
    • /
    • 2012
  • An instantaneous amplitude (IA) estimator using the symmetric higher order differential energy operator is proposed. The amplitude estimator and the instantaneous frequency (IF) estimator based on the symmetric higher order differential energy operator coincide with the analyzed signal in time, and they show better estimation results than the IA and IF based on the higher order differential energy operator. Various IF and IA estimators are applied to AM-FM signals for the performance comparison. Among the IF and IA estimators, the IF and IA estimators based on the symmetric higher order energy operator show the best estimation accuracy. Then, the IA and IF estimators are applied to the distorted power line signal to show their usefulness as power disturbance detectors.

차동형 와전류신호의 경제적 저장법 연구 (Study of Economic Storage Method for Differential ECT Signals)

  • 이창준;이진호;신영길
    • 비파괴검사학회지
    • /
    • 제24권3호
    • /
    • pp.253-258
    • /
    • 2004
  • 탐상신호로부터 결함에 대한 정확한 정보를 얻으려면, 검사자는 어떠한 결함에서 어떠한 신호가 발생되는지에 대한 충분한 배경지식이 있어야 하며, 이는 대부분 경험에 의해 얻어진다. 다른 방법으로 그러한 지식을 축적하려면, 여러 결함과 해당 결함신호에 대한 데이터베이스의 구축이 필요하다. 데이터베이스의 구축시 검사신호를 그대로 저장하게 되면 매우 큰 저장공간을 필요로 하게 된다. 본 논문에서는 푸리에 서술자를 이용하여 경제적으로 신호를 저장하는 방법을 연구하였다. 이 방법에서는 신호 대신 푸리에 서술자를 저장하여 저장공간을 줄이며, 저장된 서술자들을 이용하여 윈래의 신호를 재생한다. 차동형 와전류신호들을 사용하여 실험한 결과, ASCII데이터로 실제 신호로부터는 약 85% 까지, 그리고 필터링된 신호로부터는 $57{\sim}65%$ 까지 저장공간을 절약할 수 있었으며, 이때 재생된 신호는 원래 신호와 매우 유사함을 확인하였다. 이러한 저장법은 차동신호 데이터베이스를 구축할 때, 매우 유용하게 활용될 수 있을 것이다.

위치민감형 광다이오드 검출기의 신호처리회로 개발과 적용 (Development of Signal Process Circuit for PSAPD Detector)

  • 윤도군;이원호
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제35권4호
    • /
    • pp.315-319
    • /
    • 2012
  • 본 연구는 위치 민감형 광 증폭 다이오드로부터 나오는 신호를 증폭 및 파형 변화 후 신호의 크기를 검출하여 일정시간 동안 유지시키는 뒷단 회로 개발에 관한 연구이다. 신호발생기에서 발생한 소신호를 증폭 소자를 통한 안정적인 증폭 후 미분회로를 통하여 신호 파형을 검출하기 수월한 형태로 변형 하고, peak/hold 회로에서 피크의 최대점을 일정시간 유지하여 신호의 수집을 원활하게 하였다. 본 회로에 대한 독립적인 성능 평가를 위하여 상용 장비로부터의 검사신호를 입력으로 사용하였다.