• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.345-352
• /
• 2000

It is very important to evaluate the reliable nonlinear modulus characteristics of soils not only in the analysis of geotechnical structures under working stress conditions but also for the soil dynamic problems. For the evaluation of modulus characteristics of soils, various tests have been mostly employed in laboratory. However, different testing techniques are likely to have different ranges of reliable strain measurements, different applied stress level, and different loading frequencies, and the modulus of soils can be affected by these variables. For reliable evaluation, therefore, those effects on the modulus need to be considered, and measured values should be effectively adjusted to actual conditions where the soil is working. In this paper, to evaluate the modulus characteristics of soils, laboratory testing such as free-free resonant column (FF-RC), resonant column (RC), torsional shear (TS), static TX, and cyclic M/sub R/ tests were performed. The effects of strain amplitude, loading frequency, loading cycles, confining pressure, density, and water content on modulus were investigated. It is shown that the FF-RC test, which is simple and inexpensive testing technique, can provide a reliable estimation of small strain Young's modulus (E/sub max/), and the modulus evaluated by various laboratory tests are comparable to each other fairly well when the effects of these factors are properly taken into account.

• Journal of Forest and Environmental Science
• /
• v.36 no.2
• /
• pp.133-142
• /
• 2020

Soil physical and chemical properties at three layers such as top (0-10 cm), middle (10-20 cm) and bottom (20-30 cm) layers under three different vegetation types were studied. Soil samples were collected from Acacia forest, vegetable and fallow lands of Chittagong university campus, Chittagong, Bangladesh. Results showed that sand was the dominant soil particle followed by clay and silt fractions in all soil depths under different vegetation types. Soils of fallow land showed the highest values of bulk density while forest soils had the lowest values at three depths. Acacia forest soil having lowest values of dispersion ratio (DR) is less vulnerable while fallow soil with highest DR values is more vulnerable to soil erosion. The lower pH value at all soil layers in three ecosystems represented that soils under study are acidic in nature. Contents of organic matter, total nitrogen, exchangeable cations (Ca²⁺, Mg²⁺, K⁺ and Na⁺) and cation exchange capacity (CEC) were observed higher in Acacia forest soils compared to vegetable and fallow soils. Only soils of vegetable land had higher level of available phosphorus in three layers than that of other two land covers. The study also revealed that different soil properties were observed in three different vegetation types might be due to variation in vegetation and agronomic practices.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.1-8
• /
• 2001

This experiment was conducted to determine the effect of nursery soils and seeding density on seedling growth characteristics in automatic facility for raising of rice seedlings. The seedling characteristics were evaluated for the 10-day and 15-day old seedlings grown in six different nursery soils including farm-made soils. Two levels of seeding amount, 250 g and 300 g/tray ($60{\times}30{\times}2.5$ cm), were applied to compare the seedling characteristics according to seeding density on different nursery soils. There were wide difference in soil components among the nursery soils tested. In acidity of nursery soils, 'Bunoog 2' was the highest, pH 5.1, and 'Samkyung' was the lowest, pH 8.6. The content of available phosphate was the highest value, 843 ppm, in 'Bunong 1' and the lowest (74 ppm) in farm-made soils. The total nitrogen content of 'Bunong 1, 2, 3' and 'Weonjo' soils was higher than there of 'Samkyung' and farm-made soils. There was no difference in plant height among three types of 'Bunong' soils (Bunong 1, 2, 3), but the seedling height grown in farm-made soils was shorter than there in other nursery soils. The plant heigh was slightly taller as the increase of seeding amount from 250 g to 300 g/tray, and the difference in plant height was larger in 15-day old seedlings as compared with 10-day old seedlings. Dry weight of seedlings grown for 15 days in three 'Bunong' soils was heavier than those in other nursery soils. Based on the growing characteristics of seedlings grown in different nursery soils, the heat result was obtained from a nursery soil, 'Bunoog 2', among six marketing nursery soils tested.

• Asian Journal of Turfgrass Science
• /
• v.9 no.1
• /
• pp.81-89
• /
• 1995

The variations of the soil texture, $SiO_2$ /$Al_2$$O_3$ ratio, buffer action, exchangeable base, ex-changeable hydrogen, and mineral nutrients were investigated to estimate the grade of the soil fertility of the soil derived from the different parent rocks such as the granite in Kwangnung and the basalt in Chejudo. The results investigated were showed as follows : Basalt soils in Chejudo belong to sandy clay, light clay and sandy clay loam, while gramite soils in Kwangnung sandy loam. The $SiO_2$ /$AI_2$$O_3$ ratio of the grassland in Chejudo was 1.11 and that of the oak forest soils was 1.24, while granite soils in Kwangnung 1.54 and 1.46, respectively. The buffer actions of ba-salt soils against the N /10 HCI and $Ca(OH)_2$ were stronger than those of granite soils. The $SiO_2$/$Al_2$$O_3$ + $Fe_2$$O_3$ ratios of grassland and oak forest soils of basalt in Chejudo showed 1.10 and 1.24 respectively, while those of the grassland and oak forest of Kwangnung 1.44 and 1.33. The base exchange capacity of basalt soils which has higher value of exchangeable hydrogen was stronger than that of granite soils. But the base saturation of granite soils showed higher value than that of basalt soils. Water contents of basalt soils in Chejudo was lower than that of granite soils fo Kwangnung Basalt soils in Chejudo contain still more humus and total nitrogen than gran-ite soils in kwangnung, The amount of available nitrogen, available phosphorus and exchangeable calcium of granite soils were more than that of basalt soils, Therefore, estimating the soil fertility, granite soils in Kwangnung is higher than that of basalt soils in Chejudo.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.3
• /
• pp.179-186
• /
• 2014

Weathering indexes of the typical pedons derived from different parent materials of the soils of Korea were calculated by Kronberg and Nesbitt (1981) to understand weathering degree of the soils which might give a clue of soil formation and characterizing a soil pedon. The weathering index W1 was chemical change index, and the weathering index W2 was silicate dominant index. The chemical compositions of the 49 typic pedons were extracted from the Taxonomical Classification of Korean Soils (NIAST, 1999). The weathering indexes of Kimhae series, derived from fluvio marine material, were the highest among the analyzed soils. Within parent materials, the weathering indexes of the soils derived from limestones parent materials were high, and those derived from phorphyry materials were low. The relationship between W1 and W2 showed unique pattern which implied certain sequence within the same parent materials.

• Journal of Microbiology and Biotechnology
• /
• v.29 no.2
• /
• pp.292-296
• /
• 2019

Soils amended for long-term with high levels of compost demonstrated greater abundance of bacterial members of the phylum Bacteroidetes whereas a decreasing trend in the relative abundance of phylum Acidobacteria was noted with increasing levels of compost. Metabolic profiles predicted by PICRUSt demonstrated differences in functional responses of the bacterial community according to the treatments. Soils amended with lower compost levels were characterized by abundance of genes encoding enzymes contributing to membrane transport and cell growth whereas genes encoding enzymes related to protein folding and transcription were enriched in soils amended with high levels of compost. Thus, the results of the current study provide extensive evidence of the influence of different compost levels on bacterial diversity and community structure in paddy soils.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.573-582
• /
• 2021

From the effect of bound water, this study aims to seek the potential reasons for difference of mechanical experiment results of subgrades soils. To attain the comparatively test condition of bound water, dry forming (DF) and wet forming (WF) were used in the specimen forming process before testing, series of laboratory tests, i.e., CBR tests, direct shear tests and compaction tests. The measured optimal moisture contents, maximum dry densities, CBR, cohesion c, and internal friction angle 𝜑 were given contrastive analysis. Then to detect the adsorptive bound water in the subgrade soils, the thermal gravimetric and differential scanning calorimetry (TG-DSC) test were employed under different heating rates. The free water, loosely bound water and tightly bound water in soils were qualitatively and quantitatively analyzed. It was found that due to the different dehydration mechanics, the lost bound water in DF and WF process show their own characteristics. This may lead to the different mechanical properties of tested soils. The clayey particles have a great influence on the bound water adsorbed ability of subgrade soils. The more the clay content, the greater the difference of mechanical properties tested between the two forming methods. Moreover, in highway construction of southern China, the wet forming method is recommended for its higher authenticity in simulating the subgrade filed humidity.

• Advances in environmental research
• /
• v.5 no.2
• /
• pp.79-94
• /
• 2016

In order to evaluate the contamination and health risk, levels of six hazardous elements i.e., Cr, Ni, Cu, As, Cd and Pb in soils of 12 different land-uses were measured. The average concentration of Cu, Cr, Ni, Pb, As and Cd in soils were 267, 239, 206, 195, 58 and 16 mg/kg, respectively. Levels of each metal exceeded the environmental action level for soils, which could pose significant risk to human. The metal concentrations were subsequently used to establish hazard indices (for adults and children) where the 5th and 95th percentile values were used to derive the hazard index through different exposure pathways (ingestion, dermal contact and inhalation). Considering the total exposure through each of the three pathways, the hazard index elucidates that there was a potency of non-cancer risk at most of the sites for both the adults and children. The findings of this study suggested that different land-use soils were severely contaminated with hazardous elements and attention is needed on the potential health risks to the exposed inhabitants.

• Geomechanics and Engineering
• /
• v.33 no.6
• /
• pp.625-633
• /
• 2023

The volume changes associated with moisture or suction variation in expansive soils are of geotechnical and geoenvironmental design concern. These changes can impact the performance of infrastructure projects and lightweight structures. Assessment of unsaturated function for these materials leads to better interpretation and understanding, as well as providing accurate and economic design. In this study, expansive soils from different regions of Saudi Arabia were studied for their basic properties including gradation, plasticity and shrinkage, swelling, and consolidation characteristics. The unsaturated soil functions of saturated water content, air-entry values, and residual states were determined by conducting the tests for the entire soil water characteristic curves (SWCC) using different techniques. An attempt has been made to provide a prediction model for unsaturated properties based on the basic properties of these soils. Once the profile of SWCC has been predicted the time and cost for many tests can be saved. These predictions can be utilized in practice for the application of unsaturated soil mechanics on geotechnical and geoenvironmental projects.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.3
• /
• pp.236-246
• /
• 2006

In this study, we give insight into questionable results that can be encountered in the conventional sequential extraction of heavy metals (Cd, Cu, and Zn) from soils. Objectives of this study were to determine the extraction variability of exchangeable (EXC)-metals as using six different EXC-extractants commonly accepted, and to investigate selectivity problems with carbonates bound (CAB)-metal fraction, a buffered acetate (1.0 M NaOAc; pH 5.0) extractable-metal fraction, leading to erratic results in especially non-calcareous soils. The contents of EXC-metals were markedly varied with the different extractability of various EXC-metal extractants used. The contents of EXC-Cd fraction were ranged from 2.0 to 74.3% of total Cd content in all of the metal spiked soils studied. The contents of EXC-Zn fraction extracted with the different EXC-extractants were varied with soil types, which were from 0.4 to 3.9% of total Zn in the calcareous soils, from 7.6 to 17.9% in the acidic soil, and from 13.6 to 56.8% in the peat soil. However, the contents of EXC-Cu fraction were relatively similar among the applications of different EXC-meal extractants, 0.2 to 2.1 % of total Cu, in all soils tested. Also, these varied amounts of EXC-metal fractions, especially Cd and Zn, seriously impacted the contents of subsequent metal fractions in the procedure. Furthermore, the CAB-Cd, -Cu, and -Zn fractions extracted by the buffered acetate solution were in critical problem. That is, the buffered acetate solution dissolved not only CAB-metals but also metals that bound or occupied to subsequent fractions, especially OXD-metal fraction, in both calcareous and non-calcareous soils. The erratic results of CAB-fraction also seriously impacted the amounts of subsequent metal fractions. Therefore, the conventional sequential extraction should be reconsidered theoretically and experimentally to quantify the target metal fractions or might be progressively discarded.