• Journal of Drive and Control
• /
• v.12 no.3
• /
• pp.18-24
• /
• 2015

The plug-in hybrid electric vehicle has a high fuel economy and can be driven long distances. Its different modes include the electric vehicle, hybrid electric vehicle, and only engine operating mode. A power management strategy is important to determine which mode should be selected. The strategy makes the vehicle more efficient using appropriate power sources for driving. However, the strategy usually needs a driving speed profile which is future driving cycle. If the profile is known, the strategy easily determines which mode is driven efficiently. However, it is difficult to estimate the speed profile for a real system. To address this problem, this paper proposes a new power distribution strategy using a neural network. The average speed and driving range are used as input parameters to train the neural network system. The strategy determines a limit for the use of the battery and the desired power is distributed between the engine and the motor simultaneously. Its fuel economy can increase by improving the basic strategy.

• Wind and Structures
• /
• v.29 no.4
• /
• pp.279-297
• /
• 2019

Strong winds threaten the safety of vehicles on long-span bridges considerably, which could force traffic authorities to reduce speed limits or even close these bridges to traffic. In order to maintain the safe and economic operation of a bridge, a reasonable evaluation of the driving safety on that bridge is needed. This paper aims at carrying outdriving safety analyses for three types of vehicles on a long-span bridge in crosswinds by considering the aerodynamic interference between the bridge and the vehicles based on the wind-vehicle-bridge coupling vibration analysis. Firstly, CFD numerical simulations along with previously obtained wind tunnel testing results were used to determine the aerodynamic force coefficients of the three types of vehicles on the bridge. Secondly, the dynamic responses of the bridge and the vehicles under crosswinds were simulated, and based on those, the driving safety analyses for the three types of vehicles on the bridge were carried out for both cases considering and not considering the aerodynamic interference between the vehicles and the bridge. Finally, the effect of the aerodynamic interference on the safety of the vehicles was investigated. The results show that the aerodynamic interference between the bridge and the vehicles not only affectsthe accident critical wind speed but also the accident type for all three types of vehicles. Such effects are also different for each of the three types of vehicles being studied.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5416-5426
• /
• 2012

This study uses the algorithm which estimates the magnetic flux using different models in the low speed driving area and the high speed driving area by the voltage-current model synthesis magnetic flux Estimator and, from this result, estimates the magnetic flux angle to achieve the stable speed control through all the areas from the low speed to the high speed drive. In particular, the current change and the magnetic flux change under variable load were estimated in real time in the low speed area and this made the control characteristic improved in the low speed area. According to this, even under variable load, the more stable simulation and experiment could have been completed using PI current controller and PI flux controller in all the areas. As a result, the outstanding speed control characteristic has been achieved.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.945-948
• /
• 2005

In wireless and handheld platforms area, performance, power and cost are key metrics for product success. This is driving increasing levels of on-chip integration in state-of-the-art application processors. The purpose of this project is to optimize and design the energy-efficient embedded system that properly displays video and audio in real time. The requirements are for the media player to be capable of decoding real-time streaming video and audio with the least possible energy consumption for a variety of different clips at different resolutions. We implemented this Linux based multimedia player on Intel's PXA27x platform.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.6
• /
• pp.97-114
• /
• 2022

Unlike ground roads, the on-ramp merging section of underground roads cannot be seen by drivers of main road due to tunnels. In this study, a driving simulator was used for analysis, and virtual driving experiments were carried out to assess the driver's visibility for different design factors. The driver's driving behavior was analyzed by setting scenarios considering the length of chevron markings and the approach speed from the main road. The results of the analysis were used to determine the design factors for ensuring visibility when constructing the virtual driving environment for each scenario. These factors, including speed, lane change points, and driver's gaze ratios, were reviewed for significance using a statistical approach. As a result, in scenarios with a higher approach speed from the main road, it was discovered that there was a difference in driver's behavior between specific scenarios depending on the length of the section with chevron markings. Based on these findings, this study suggests implications and feasible solutions to improve driver safety on the on-ramp merging section of underground roads.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.670-677
• /
• 2011

In this research, noise of the Korean high-speed train running at different speed from 150 to 300 km/h was measured by using microphones and the difference of sound pressure according to its driving velocities was analyzed. In addition, sound pressure characteristics of front, pantograph, bogies and between-car sections of the Korean high-speed trains were deduced by applying delay and sum beam-forming method using a microphone array. From the research, the effects of locations of the high-speed train were investigated. The results of this research can be utilized to reduce noise of a high-speed train.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.7
• /
• pp.349-356
• /
• 1999

Wide operating range and speed control is needed for wind power generating and a Doubly Fed Induction Generator(DFIG) has good adaptivity for that purpose. This paper deals with the speed and power control using the Grid connected DFIG in the super-synchronous speed regions, by controlling frequency and voltage fed to the rotor. Power flow of the DFIG and steady-state algebraic equations of the equivalent circuit are analyzed. For the speed control analysis, torque simulation is performed whereby the different slip between operating motor driving frequency and synchronous frequency of M-G system applied. To keep the output rating of the generator, the exciting frequency and voltage attenuation are applied.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.12
• /
• pp.659-663
• /
• 2002

The brake systems of high-speed train are to be equipped with three different brake systems, such as regenerative brake with regenerative feedback in driving car, a pneumatic disc brake, and non-contact linear eddy-current brake(ECB). The regenerative brake and the pneumatic disc brake are acting on the wheels. Their achievable braking force depends on the adhesive coefficient, which is influenced by the weather condition and speed, between the wheel and The linear eddy current brake gets an economical solution in the high-speed train because of the independence of the adhesive coefficient, no maintenance needed. and the good control characteristics. The braking force and the normal force of ECB for korean high-speed train are analysed by the 2D FEM(Finite Element Method). Finally the normal force is compared with the experiential values to verify the analysis.

• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.14-19
• /
• 2013

Because excessive interior noise when riding a high-speed train leads to annoyances, fatigue and stress for passengers, interior noise reduction methods should be considered. In particular, a high-speed train operated in various operation environments, and in South Korea, these include open fields and tunnels. Therefore, a specific study about changes in interior noise characteristics according to different environments is necessary. For this reason, the interior noise characteristics on a KTX train and on the KTX-Sancheon train were analyzed from noise measurements using microphones in this paper. Vibrations on the axles, bogies and floor were also measured, are these area are structural paths for interior noise. From this research, the interior noise characteristics according to the driving speed were deduced and the effects on interior noise by driving environments such as open fields and tunnels were investigated. Furthermore, the effect on interior noise by axles, bogies and floor vibrations were analyzed from a transfer function analysis.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.24-32
• /
• 2007

Variable message sign (VMS), which is used for providing real-time information on traffic conditions and accident occurrences, is one of the important components of intelligent transportation systems. It is essential that the scheme of VMS message phase and duration should be designed with the consideration of drivers' message reading time that will be depended on various causal factors, such as the amount of VMS messages, drivers' travel speed, and geometric conditions. However, there have been not much efforts to explore the relationships between the drivers' message reading time and the above causal factors. Driving simulator experiments were conducted to obtain drivers' message reading time with respect to the amount of VMS messages, drivers' travel speed, and different geometric conditions. Regression modeling techniques were applied to develop an estimation model for drivers' message reading time. Probabilistic outcomes of the proposed model would be greatly utilized to design proper VMS message phase and duration.