• 한국표면공학회지
• /
• 제37권2호
• /
• pp.71-75
• /
• 2004

The technology of $C_{60}$ fullerite films preparation by means of gas-phase deposition and structure of fullerite films are described. A three-channel flow plant was used to obtain fullerite films. The films were deposited in the flow of inert gas under reduced pressure onto a cooled silicon or sapphire substrate placed inside the reaction chamber of the plant. The plant allows one to obtain the films of pure fullerenes and to synthesise the films from fullerene compounds and doped fullerenes. The structure of two types of films were investigated by FE-SEM and SEM techniques: pure fullerite films onto silicon and sapphire substrates as well as compound films were studied by FE-SEM technique. All samples have shown columnar structure with high level of porosity. The synthesis of films composed of fullerene and its compounds for use in electronics is demonstrated to be promising. For example, experiments confirm the possibility to use fullerite films in sensor electronics to produce humidity and thermal sensors. It is also possible to use the sensitivity of these films to isotropic pressure. The experiments with $C_{60}$-Cu-J films have shown quite strong dependence of their resistance on pressure of different sort of medium-gas that could be used in gas-sensitive sensors. The structure and preparation technology of resistive sensor based on fullerite films are described.bed.

• 대기
• /
• 제19권2호
• /
• pp.213-226
• /
• 2009

In order to investigate the characteristics of Changma over the Korean peninsula, KEOP-2007 IOP (Intensive Observing Period) was conducted from 15 June 2007 to 15 July 2007. KEOP-2007 IOP is high spatial and temporal radiosonde observations (RAOB) which consisted of three special stations (Munsan, Haenam, and Ieodo) from National Institute of Meteorological Research, five operational stations (Sokcho, Baengnyeongdo, Pohang, Heuksando, and Gosan) from Korea Meteorological Administration (KMA), and two operational stations (Osan and Gwangju) from Korean Air Force (KAF) using four different types of radiosonde sensors. The error statistics of the sensor of radiosonde were investigated using quality control check. The minimum and maximum error frequency appears at the sensor of RS92-SGP and RS1524L respectively. The error frequency of DFM-06 tends to increase below 200 hPa but RS80-15L and RS1524L show vice versa. Especially, the error frequency of RS1524L tends to increase rapidly over 200 hPa. Systematic biases of radiosonde show warm biases in case of temperature and dry biases in case of relative humidity compared with ECMWF (European Center for Medium-Range Weather Forecast) analysis data and precipitable water vapor from GPS. The maximum and minimum values of systematic bias appear at the sensor of DFM-06 and RS92-SGP in case of temperature and RS80-15L and DFM-06 in case of relative humidity. The systematic warm and dry biases at all sensors tend to increase during daytime than nighttime because air temperature around sensor increases from the solar heating during daytime. Systematic biases of radiosonde are affected by the sensor type and the height of the sun but random errors are more correlated with the moisture conditions at each observation station.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.395-397
• /
• 2019

조선기술과 항해장비 기술이 발전하고 있지만 여전히 해양사고는 80%이상이 인적과실에서 비롯되고 있다. 인적과실을 저감시켜 해양사고를 절감시키려는 노력은 항해사를 대상으로 면담이나 설문을 시행하는 등 정성적인 연구방식에 많이 의존하고 있어서 객관적인 인적과실의 실체를 규명하는데 제한이 있다. 본 연구에서는 이 같은 단점을 극복하기 위하여 항해사의 항해 업무 수행을 방해하지 않으며 공간적 제한을 극복할 수 있도록 웨어러블 센서를 활용하여 항해사의 동작을 실측하고 상황인지 여부가 항해 수행 동작에 어떤 영향을 미치는지 구분하고자 한다. Full mission ship handling simulator를 활용하여 항해사가 특정한 시나리오를 수행하는 중에 위험성을 가진 장애물을 발견하기 전과 후의 어떤 행동패턴 변화를 보이는지 측정하였다. 구분된 항해 동작 패턴은 항해 위험 상황에서 적절한 조치를 취하고 있는지 여부를 객관적으로 구분하여 인적과실을 절감하는데 활용될 것으로 기대된다.

• 한국ITS학회 논문지
• /
• 제23권1호
• /
• pp.182-196
• /
• 2024

자동차 보급과 교통 시설 발달로 인한 문제에 대응하여, ADAS와 같은 운전 보조 기술이 주목받고 있다. 최근에는 스마트폰 내장 센서를 사용한 운전패턴 분석 방법론이 개발되었다. 이 연구에서는 레이블 없이 대조학습을 통해 운전패턴의 특징을 학습하고 변화점을 감지하는 새로운 방법을 제안한다. 이 방법은 운전패턴 분류에도 확장 가능하여, 매우 적은 레이블링 데이터만으로 높은 분류 성능을 달성할 수 있음은 물론 적용 차량이 달라지는 도메인 변화 문제에 민감하게 반응하지 않아 일반화된 성능을 달성할 수 있다는 장점을 가지고 있다. 또한 본 연구에서는 추후 스마트폰 적용성을 고려하여 6가지 대표적인 경량화 딥러닝 모델에 대해 제안하는 방법을 적용하고 비교분석하여 추후 스마트폰 기반의 시스템 개발에 활용할 수 있도록 하였다.

• Composites Research
• /
• 제17권4호
• /
• pp.61-67
• /
• 2004

Micromechanical 시험법과 음향방출을 이용하여 단일 basalt 섬유 강화 에폭시 복합재료의 비파괴 손상감지능을 평가하였다. 음향방출 센서로는 PZT 및 고분자 PVDF와 P(VDF-TrFE)를 사용하였고 단섬유 강화 시험법에서 각 센서 종류에 따른 손상감지능을 상호 비교하였다. 고분자 센서는 시편 표면에 부착시키거나 내부에 함침시켜 사용하였지만 PZT 센서는 표면에 부착하여 사용하였다. 고분자 센서를 시편 표면에 부착시킨 경우와 함침시킨 경우 감지능은 비슷하였지만 부착의 경우 debonding 신호가 많아 함침 시키는 방법이 손상감지에 더 효과적이었다. 손상 감지능은 PZT센서가 가장 높았고, 함침 및 부착 모두에서 PVDF와 P(VDF-TrFE) 센서의 손상감지능은 거의 비슷하였다.

• 한국인터넷방송통신학회논문지
• /
• 제22권1호
• /
• pp.21-27
• /
• 2022

사회가 발전하고 복잡해짐에 따라 재난의 종류도 미세먼지, 전염병 등과 같이 새롭고 다양하게 발생하고 있다. 하지만 기존에는 이러한 재난에 대비할 수 있는 정확한 정보를 제공하는 전관방송 시스템이 없었다. 본 논문에서는 공공 데이터와 IoT 센서로부터 수집된 오염된 대기질 데이터를 분석하여 자동으로 경보를 방송하는 전관방송 시스템을 제안한다. 대기질에 따라 경보의 단계가 달라지며, 공공데이터에서 제공하는 정보는 측정소로부터의 거리나 풍향 등 다양한 요인으로 인해 안내 지역과 상당한 차이가 있는 결과를 나타내기도 한다. 이를 보완하기 위해 공공데이터에서 가져온 데이터와 현장 IoT센서에서 얻은 데이터를 비교 분석하여 방송하는 방법을 제안하고자 한다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.410-415
• /
• 2004

Employing knowledge of adaptive possibilities of agents in multi-agents system, we have explored new aspects of distributed modular systems for building ubiquitous heterogeneous robotic systems using intelligent building blocks (I-BLOCKS) [1] as reconfigurable modules. This paper describes early technological approaches related to technical design, experimental developments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop modular robotic systems. The processing technology presented in this paper is embedded inside each $DUPLO^1$ brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Block in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can easily do 'programming by building' and thereby create specific functionalities of a modular robotic structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modern artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing modular robotic system with different types of morphology, functionality and behavior. To assess these potential I-BLOCKS possibilities, the paper presents a limited range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular robots. The paper also reports briefly about earlier experiments of I-BLOCKS created on users' natural inspiration by a just defined concept of modular artefacts.

• 센서학회지
• /
• 제27권5호
• /
• pp.335-339
• /
• 2018

The optical characteristics of a terahertz (THz) antenna-coupled bolometer (ACB) detector were evaluated using a pulsed quantum cascade laser (QCL) and radiation blackbody sources. We investigated a method for measuring the responsivity and noise-equivalent power (NEP) of the THz detector using two different types of light sources. When using a QCL source with a frequency of 3 THz, the average responsivity of 24 devices was $1.44{\times}10^3V/W$ and the average NEP of those devices was $3.33{\times}10^{-9}W/{\surd}Hz$. The average responsivity and NEP as measured by blackbody source were $1.79{\times}10^5V/W$ and $6.51{\times}10^{-11}W/{\surd}Hz$, respectively, with the measured values varying depending on the light source. This was because the output power of each light source was different, with the laser source being driven by a pulse type wave and the blackbody source being driven by a continuous wave. The power input to the THz sensor was also different. Futhermore, the responsivity and NEP values measured using band pass filter (BPF) were similar to those measured when using only THz windows. It was found that ACB sensor responds normally in the THz region to both the laser and the blackbody source, and the method was confirmed to effectively evaluate the characteristics of the THz sensor.

• Nuclear Engineering and Technology
• /
• 제53권4호
• /
• pp.1167-1175
• /
• 2021

The process of automation and monitoring in industrial control system involves the use of many types of sensors. A programmable logic controller plays an important role in the automation of the different processes in the power plant system. The major control units are boiler for temperature and pressure, turbine for speed of motor, generator for voltage, conveyer belt for fuel. The power plant units are controlled using microcontrollers and PLCs, but FPGA can be the feasible solution. The paper focused on the design and simulation of hardware chip to monitor boiler, turbine, generator and conveyer belt. The hardware chip of the plant is designed in Xilinx Vivado Simulator 17.4 software using VHDL programming. The methodology includes VHDL code design, simulation, verification and testing on Virtex-5 FPGA hardware. The system has four independent buzzers used to indicate the status of the boiler, generator, turbine motor and conveyer belt in on/off conditions respectively. The GSM is used to display corresponding message on the mobile to know the status of the device in on/off condition. The system is very much helpful for the industries working on plant automation with FPGA hardware integration.

• Food Science and Biotechnology
• /
• 제18권1호
• /
• pp.89-94
• /
• 2009

Frequent outbreaks of foodborne illness have been increasing the awareness of food safety. Conventional methods for pathogen detection and identification are labor-intensive and take days to complete. Some immunological, rapid assays are developed, but these assays still require prolonged enrichment steps. Recently developed biosensors have shown potential for the rapid detection of foodborne pathogens. In this study, an impedimetric biosensor was developed for rapid detection of Salmonella entritidis in food sample. To develop the biosensor, an interdigitated microelectrode (IME) was fabricated by using a semiconductor fabrication process. Anti-Salmonella antibodies were immobilized based on neutravidin-biotin binding on the surface of the IME to form an active sensing layer. To evaluate the effect of electrode gap on sensitivity of the sensor, 3 types of sensors with different electrode gap sizes (2, 5, and $10{\mu}m$) were fabricated and tested. The impedimetric biosensor could detect $10^3\;CFU/mL$ of Salmonella in pork meat extract with an incubation time of 5 min. This method may provide a simple, rapid, and sensitive method to detect foodborne pathogens.