수용성(水溶性) 추출물(抽出物)이 목재(木材)의 물리적(物理的) 성질(性質)에 미치는 영향(影響) (A Study on the Effect of Water Soluble Extractive upon Physical Properties of Wood)
-
- Journal of the Korean Wood Science and Technology
- /
- 제10권3호
- /
- pp.13-44
- /
- 1982
7.1 옛날부터 재목(材木)을 오래 불에 담그어 쓰면 덜트로 덜 휜다고 하였는데 말로서 전(傳)하여 왔을 뿐 그 연구결과(硏究結果)나 또는 그 원인(原因)에 대한 것은 분명(分明)치 못하였다. 한편 재목(材木)의 추출성분(抽出成分)이 그 재목(材木)의 물리적(物理的) 성질(性質)에 영향(影響)할 것이라는 추측(推測)은 많었으나 실지로 그 영향(影響)에 대한 연구(硏究)를 하여 그 결과(結果)와 그 원인(原因)을 밝힌 것도 극(極)히 적었다. 이 연구(硏究)는 이와같은 입장(立場)에 놓여있는 그 간미지(間未知)한 점(点)을 밝히기 위(爲)하여 다시말하면 재목(材木)을 물에 담그어 그 수용성(水溶性) 추출물(抽出物)을 추출(抽出)하므로써 일어나는 물리적(物理的) 성질(性質)에 대한 결과(結果)를 조사(調査)하고 이 결과(結果)를 통(通)하여 얻는 진리(眞理)를 응용(應用)하여 재목(材木)의 일대 흠점(欠点)인 수축(收縮), 팽창(膨脹) 이에따라 일어나는 트는것, 휘는것, 틀어지는 것 등(等)을 막아 재목이용(材木利用)의 합리화(合理化)를 기(期)할 목적(目的)으로써 시작(始作)된 것이며 Yale 재과대학(材科大學) 목재이용학(木材利用學) 연구실(硏究室)에서 담당교수 F.F.Wangaard 박사(博士) 지도하(指導下)에 재료(材料)는 동(同) 연구실(硏究室)에 준비(準備)되어 있는 북미(北美)산 스트로 - 부 소나무 참나무 그리고 남방열대(南方熱帶)산 하이메나에아의 삼(三) 종류(種類)에 대하여 연구(硏究)되었다. 7.2 연구(硏究)의 대상이 된 물리적(物理的) 성질(性質)은 목재(木材)의 실용적 사용(使用)에 있어서 가장 관계가 깊은 다시 말하면 트고 휘고 틀어지는등(等)의 관계가 깊은 평형함수량(平衡含水量), 수축(收縮), 팽창(膨脹) 그리고 강도(强度)의 지표(紙票)가 되는 비중(比重)등이 있다. 7.3 시험(試驗)은 위에 말한 세 가지 종류(種類)를 가지고 추출처리(抽出處理)를 하여 추출(抽出)한것과 반대로 추출성(抽出性) 물질(物質)은 침투(浸透)시킨것에 대하여 비교(比較)될 무처리(無處理)한 세 다른 공시재(供試在)를 준비(準備)하여 실시되었다. 다음 시험결과(試驗結果)는 7.4 수용성(水溶性) 추출물(抽出物)이 추출량(抽出量)과 그 추출액중(抽出液中)의 성분(成分)그룹은 Table 36에 표시(表示)된것과 같으며 나무 종류(種類)에 따라 추출량(抽出量)에 그리고 각(各) 성분(成分)그룹의 종류(種類)와 그 양(量)에 차이(差異)를 볼수 있었다. 7.5 평형함수량(平衡含水量)에 있어서는 a) 추출처리(抽出處理)를 하여 그 추출성분(抽出成分)이 빠져버린 공시재(供試材)와 그와 반대의 공시재(供試材) 사이에는 확실한 차이(差異)가 있어 추출성분(抽出成分)을 재내(材內)에 포함(包含)하고 있으므로써 같은 관계흡도에서 80%방습시(放濕時)는 이와 반대 평형함수량(平衡含水量)은 많아졌다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 하여 당분(糖分)이 재내(材內)에 침입(侵入)된 공시재(供試材)는 대체(大體) 추출처리(抽出處理)를 하지 않은 공시재(供試材)와 거의 같은 경향(傾向)의 결과(結果)를 나타내고 있다. c) 나무의 종류(種類)에 따른 차이(差異)는 일정한 경향(傾向)을 볼 수 없으나 스트로-부 소나무의 심재부(心材部)와 변재부를 비교(比較)하면 심재부(心材部)는 그 평형함수량(平衡含水量)이 적다. 이것은 원래(元來)의 함수량(含水量)에 있어서 심재부(心材部)가 적은데 이와같은 차이(差異)는 식물생리학적(植物生理學的) 또는 그 해부학적(解剖學的) 구조(構造)의 차이(差異)에서 생기는 것이다. 7.6 수축(收縮)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 수축량(收縮量)은 그와 반대로 추출처리(抽出處理)를 않어 추출성분(抽出成分)이 그대로 남어있는 공시재(供試材)에 비교(比較)하여 그 수축량(收縮量)이 모두 크다. b) 설탕액(雪糖液)에 담그어 침투처리(浸透處理)를 한 공시재(供試材)는 그 수축량(收縮量)은 다른것에 비교(比較)하여 제일 적고 모두 침투처리(浸透處理)를 하지않은 공시재(供試材)와 거의 같은 결과(結果)를 보이고 있는데 이것은 재목(材木)을 사용전(使用前)에 특수(特殊)한 침투처리(浸透處理)를 하여 쓰면 재목(材木)의 일대 흠점(欠点)인 수축(收縮)을 막을수 있다는 것을 실증하는 것이다. c) 나무의 종류별(種類別)로보면 스트로-부 소나무의 심재부(心材部)는 그 변재부보다 수축량(收縮量)이 적으며 참나무의 수축량(收縮量)은 제일 크로 스토로-부 소나무에 비교(比較)하여 약(約)2배(倍) Hymenaea는 참나무 보다 적고 스트로 - 부 소나무 보다는 컸다. d) 각(各) 수종(樹種)을 통(通)하여 방향성(方向性)에 따른 수축량(收縮量)을 보면 촉단면방향(觸斷面方向)의 수축량(收縮量)은 경단방향(徑斷方向)의 수축량(收縮量)보다 큰 것은 다른 모든 나무에서 보느 결과(結果)와 같다. e) 추출량(抽出量)과의 관계를 보면 추출량(抽出量)이 많은 것일수록 추출처리(抽出處理)를 않은 것과의 수축량(收縮量)의 차이(差異)는 컸다. 7.7 팽창(膨脹)에 있어서는 a) 추출처리(抽出處理)로 그 성분(成分)을 추출(抽出)하여 낸 공시재(供試材)의 팽창량(膨脹量)은 그와 반대의 것에 비교(比較)하여 모두 팽창량(膨脹量)이 컸다. b) 재목(材木)의 방향성(方向性)에 따라보면 모두 촉단(觸斷) 방향(方向)의 팽창량(膨脹量)은 경단방향(徑斷方向)의 팽창량(膨脹量)에 비(比)하여 크다. c) 수축(收縮)에서 본것과 같이 팽창(膨脹)에 있어서도 나무의 종류(種類)에 따라 그 팽창량(膨脹量)에 차이(差異)를 볼수 있으며 그 팽창량(膨脹量)은 참나무 하이메나에아 스트로-부 소나무의 변재 그리고 동심재(同心材)의 순서(順序)도 적어졌으며, 수축량(收縮量)이 큰 것은 팽창량(膨脹量)에 있어서도 크다는 것을 실증하였다. 7.8 비중(比重)에 있어서는 a) 추출처리(抽出處理)를 한 공시재(供試材)의 비중(比重)이 추출처리(抽出處理)를 않은 공시재(供試材)의 비중(比重)에 비교(比較)하여 컸다. 이것은 비중(比重)을 결정(決定)할 때 사용(使用)된 용적(容積)에 기인(起因)하였으며 사실은 이와 반대의 결과(結果)가 나타나야 할 것이다. b) 나무의 종류별(種類別)로 보면 스트로-부 소나무의 심재(心材)는 변재보다는 그 비중(比重)이 크며 두 참나무의 비중(比重)은 소나무의 그것보다 배(倍)나 크고 하이메나에아는 그 비중(比重)이 제일 컷다. (9) 이상(以上) ; 모-든 시험결과(試驗結果)를 종합(綜合)하여 생각할 때 막연(漠然)히 재목(材木)을 물에 오래 담그어 쓴다는 생각은 오히려 잘못하면 목재(木材)의 성질(性質)을 더욱 악화(惡化)시킬 우려(憂慮)가 있으며 물에 담그어 쓰되 설탕질등(雪糖質等)으로 재목내부(材木內部)에 침투(浸透)할 수 있는 성질(性質)의 성분(成分)이 용해(溶解)되어 있는 액중(液中)에 담그어 쓰는 것은 재목(材木)의 일대 흠점(欠点)인 수축(收縮)과 팽창(膨脹) 그리고 이에 따라 일어나는 트고 휘는 일이며 틀어지는 등(等)의 흠점(欠点)을 막을 수 있다는 것을 실증하게 되었다. 만고(萬苦) 물속에 오래 담그어 쓰는 것이 다시 말하면 수용성(水溶性) 추출물(抽出物)을 빼내어 쓰는 것이 그 결과(結果)에 있어 확실히 양호(良好)하였다는 사실이 있었다면 그것은 수용성성분(水溶性成分)을 제출(提出)함으로써 균일(均一)한 수축(收縮)과 팽창(膨脹)이 일어나는데 기인(起因)하였을 것이다.
양송이 합성퇴비(合成堆肥) 배지(培地)의 제조(製造)에 있어서 탄소원(炭素原), 질소원(窒素源) 등(等) 영양원(營養源)과 물리적(物理的) 안정(安定)을 위(爲)한 보조재료(補助材料)의 선정(選定), 볏짚을 주재료(主材料)로 사용(使用)할 때의 퇴비재료(堆肥材料)의 배합(配合), 야외퇴적(野外堆積) 및 후발효(後醱酵), 볏짚 퇴비배지(堆肥倍地)에서의 유해생물(有害生物) 발생(發生) 및 방제(防除)에 관(關)한 연구(硏究)를 수행(遂行)한 바 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 합성퇴비배지(合成堆肥倍地)의 탄소원(炭素原)으로서 볏짚은 보리짚과 밀짚보다 발효(醱酵)가 신속(迅速)하고 퇴비(堆肥)의 질소함량(窒素含量)이 높으며 배지(培地)의 질(質)이 양호(良好)하여 양송이 자실체(字實體) 수량(收量)이 현저(顯著)히 높았다. 2. 한국(韓國)에서 생산(生産)되는 일본형(日本型) 벼와 통일품종(統一品種等) 두 계통(系統)의 볏짚은 초형(草型) 및 이화학적(理化學的) 성질(性質)이 달라서 퇴비(堆肥)의 발효상태(醱酵狀態)에 차이(差異)가 많았다. 통일(統一)볏짚은 발효(醱酵)가 빠르게 진행(進行)되므로 퇴적기간(堆積期間)을 단축(短縮)하고 수분공급량(水分供給量)을 감소(減少)시키며 물리성(物理成) 안정재(安定材)를 첨가(添加)하여야 한다. 3. 보릿짚 퇴비(堆肥)는 볏짚퇴비(堆肥)보다 생산성(生産性)이 낮으나 보릿짚과 볏짚을 50 : 50으로 혼용(混用)하면 볏짚과 대등(對等)한 수량(收量)을 얻을 수 있었다. 4. 퇴비배지(堆肥倍地)의 전질소(全窒素), 전유기물(全有機物) 질소(窒素) 및 Amino산태(酸態), Amide태(態) Amino당태(糖態) 질소(窒素)와 자실체(字實體) 수량간(收量間)에는 각각(各各) 높은 정(正)의 상관(相關)이 있으나 Ammonia태(態) 질소(窒素)는 균사생장 및 자실체(字實體) 형성(形成)에 심(甚)히 유해(有害)하였다. 5. 볏짚을 주재료(主材料)로 사용(使用)할 때 무기태(無機態) 질소원(窒素源)으로서 요소(尿素)가 가장 좋았고 유안(硫安)과 석회질소(石灰質素)는 부적당(不適當)하였다. 요소(尿素)는 3회(回) 분시(分施)할 때 손실(損失)이 감소(減少)되고 퇴비(堆肥)의 질소함량(窒素含量)이 증가(增加)하였다. 6. 유기태영양원(有機態營養源) 중(中) 들깻묵, 참깻묵, 밀기울, 계양(鷄養) 등(等)의 첨가(添加)는 퇴비(堆肥)의 발효(醱酵)를 양호(良好)하게 하고 자실체수량(字實體收量)을 증가(增加)시켰다. 7. 들깻묵, 밀기울 등(等) 유기태영양원(有機態營養源)은 장유박(醬油粕), 이분조미료폐비(泥粉調味料廢肥) 등(等) 공장폐엽물(工場廢葉物)로서 대체(代替)하여 재배(栽培)할 수 있었다. 8. 볏짚퇴비(堆肥) 제조시(製造時) 석고(石膏)와 Zeolite를 첨가(添加)하면 과습(過濕) 및 결착(結着) 등(等)으로 인(因)한 물리성(物理性)의 악화(惡化)가 방지(防止)되며, 자실체수량(字實體收量)이 증가(增加)하는데 그 효과(效果)는 일본형(日本型) 볏짚보다 통일(統一)에서 현저(顯著)하였다. 9. 볏짚을 주재료(主材料)로 퇴비재료(堆肥材料)를 배합(配合)할 때 계양(鷄養) 10%, 깻묵 5%, 요소(尿素)
동력경운기(動力耕耘機)의 효율적(效率的)인 이용(利用)과 고장(故障)으로 인(因)한 문제점(問題點)과 그에 따른 대책(對策)을 강구(講究)하기 위(爲)한 기초자료(基礎資料)를 제시(提示)코저 전국(全國) 8개도 278농가(農家)를 대상(對象)으로 동력경운기(動力耕耘機)의 각종(各種) 고장(故障) 및 수리실태(修理實態)를 조사분석(調査分析)한 결과(結果)는 다음과 같다. 가. 고장빈도(故障頻度) 동력경운기(動力耕耘機)의 대당(臺當) 년간(年間) 고장발생(故障發生) 빈도(頻度)는 9.05회(回)이었으며 평균(平均) 39.1시간(時間) 작업(作業)에 1회(回)의 고장(故障)이 발생(發生)되었다. 고장빈도(故障頻度)가 가장 높았던 곳은 점화연료공급계통(點火燃料供給系統)으로서 2.02회(回)로 전체고장(全體故障)의 22.3%를 차지하였고, 그 다음이 부속작업기(附屬作業機) 시린더계통(系統), 주행장치등(走行裝置等)의 순서(順序)로 나타났다. (2) 동력경운기(動力耕耘機) 사용년수별(使用年水別) 고장(故障) 발생빈도(發生頻度)는 구입후(購入後) 6년(年) 이하(以下) 경과(經過)된 기계(機械)에서 37.7시간(時間) 사용(使用)에 1회(回)의 고장(故障)이 발생(發生)된 것으로 나타나 가장 높았고 그 다음이 구입후(購入後) 2년(年) 미만(未滿)된 기계(機械)로서 38.6시간(時間) 작업(作業)에 1회(回)이 고장(故障)이 발생(發生)되었다. (3) 동력경운기(動力耕耘機) 기종별(機種別) 고장(故障) 발생빈도(發生頻度)는 석유(石油)엔진이 36.3시간(時間) 작업(作業)에 1회(回)의 고장(故障)이 발생(發生)되어 디젤엔진의 42.8시간(時間)보다 높았고 마력별(馬力別)로는 석유(石油)엔진의 경우(境遇) 8마력(馬力)이 10마력(馬力)보다 고장(故障) 발생빈도(發生頻度)가 높게 나타났다. (4) 동력경운기(動力耕耘機) 월별(月別) 고장(故障) 발생빈도(發生頻度)는 10월(月)에 가장 낮아 51.5시간(時間) 작업(作業)에 1회(回)의 고장(故障)이 발생(發生)되었고 그 다음이 6월로 49.7시간(時間) 작업(作業)에 1회(回)의 고장(故障)이 발생(發生)된 것으로 나타나 작업시간(作業時間)이 많았을 때 고장(故障) 발생빈도(發生頻度)는 상대적(相對的)으로 적었던 것으로 나타났다. 나. 수리장소(修理場所) (1) 동력경운기(動力耕耘機) 고장시(故障時)의 수리장소(修理場所)는 자가수리(自家修理)가 평균(平均) 45.3%이었고 공장수리(工場修理)가 54.7%로 나타나 공장수리(工場修理)가 자가수리(自家修理)보다 많았다. (2) 동력경운기(動力耕耘機) 사용년수별(使用年數別) 수리장소(修理場所)는 구입후(購入後) 경과년수(經過年數)가 길어질수록 공장수리(工場修理)보다 자가수리(自家修理)가 많아지는 것으로 나타났다. (3) 동력경운기(動力耕耘機) 자가수리율(自家修理率)은 디젤엔진이 석유(石油)엔진보다 높았으며 석유(石油)엔진에서는 10마력(魔力)이 디젤엔진에서는 8마력(魔力)이 높았다. (4) 고장부위별(故障部位別) 자가수리(自家修理) 비율(比率)은 조향장치(操向裝置)가 가장 높아 66.7%였으며 그 다음이 점화연료계통(點火燃料系統)인 것으로 나타났고 자가수리비율(自家修理比率)이 가장 낮는 곳은 부속작업기(附屬作業機)로서 26.5%에 불과(不過)하였다. 다. 고장원인(故障原因) (1) 동력경운기(動力耕耘機) 고장원인(故障原因)은 기계(機械)의 노후(老朽)에 의(依)한 고장(故障)이 년간(年間) 대당(臺當) 5.18회(回)로 전체(全體)의 57.2%를 차지하여 가장 많았고 정비불량(整備不良)과 과부하(過負荷)로 인(因)한 고장(故障)이 전체(傳遞)의 37.7%이었다. (2) 동력경운기(動力耕耘機) 구입후(購入後) 2년(年) 미만(未滿)의 기종(機種)에서는 정비불량(整備不良)으로 인(因)한 고장(故障)이 많았던 반면(反面) 노후(老朽)로 인(因)한 고장(故障)이 적었다. (3) 동력경운기(動力耕耘機) 고장원인(故障原因)은 기종별(機種別) 마력별(馬力別) 공(共)히 노후(老朽)로 인(因)한 고장(故障)과 과부하(過負荷)로 인(因)한 고장(故障)이 대부분(大部分)이었으며 특히 석유(石油) 5마력(馬力)엔진에서는 과부하(過負荷)로 인(因)한 고장(故障)이 월등히 높았다. (4) 동력경운기(動力耕耘機) 부위별(部位別) 고장원인(故障原因)은 시린더 계통(系統)과 주행장소(走行場所)의 고장(故障)에서는 주(主)로 노후(老朽)에 의(衣)한 원인(原因)이 많았던 반면(反面) 점화연료계통(點火燃料系統)의 고장(故障)에서는 정비불량(整備不良)으로 인한 고장(故障)이 많았다. 라. 수리비율(修理(比率) (1) 동력경운기(動力耕耘機) 년간(年間) 대당(臺當) 수리비(修理費)는 34,509원이었고 동력경운기(動力耕耘機) 1시간(時間) 수업당(修業當) 평균(平均) 수리비(修理費)는 97원이었다. (2) 동력경운기(動力耕耘機) 기종별(機種別) 수리비(修理費)는 석유(石油)엔진이 40,697원으로 디젤엔진의 28,322원보다 훨씬 많았다. (3) 동력경운기(動力耕耘機) 기종별(機種別) 1시간(時間) 수업당(修業當) 평균(平均) 수리비(修理費)는 석유(石油)엔진이 108원으로 디젤엔진의 86원보다 많았으며 마력별(馬力別)로는 차이(差異)가 없었다. (4) 동력경운기(動力耕耘機) 고장부위별(故障部位別) 년간(年間) 수리비(修理費)는 시린더 계통(系統)이 13,036원으로 가장 많았으며 조향장치(操向裝置)가 362원으로 가장 적었다. (5) 동력경운기(動力耕耘機) 1회(回) 수리시(修理時)의 평균(平均) 수리비(修理費)는 3,713원이었으며 시린더계통(系統)이 10,598원으로 가장 많았고 조향장치(操向裝置)가 1,006원으로 가장 적었다. 마. 자가수리소요시간(自家修理所要時間) 및 고장(故障)으로 인(因)한 불가동시간(不稼動時間) (1) 동력경운기(動力耕耘機) 년간(年間) 대당(臺當) 자가수리(自家修理) 소요시간(所要時間)은 8.36시간(時間)이었고 고장(故障)때문에 작업(作業)하지 못한 시간(時間)은 년간(年間) 대당(臺當) 93.5시간(時間)이었다. (2) 동력경운기(動力耕耘機) 사용년수별(使用年水別) 자가수리시(自家修理時)의 1회수리당(回修理當) 소요시간(所要時間)은 6년이상(年以上) 경과(經過)된 기계(機械)에서 21.3시간(時間)으로 가장 높았고 고장(故障) 때문에 사용(使用)하지 못한 시간(時間)은 2년(年) 미만(未滿)된 기계(機械)에서 년간(年間) 대당(臺當) 127.13시간(時間)으로 나타나 가장 높았다. (3) 동력경운기(動力耕耘機) 기종별(機種別) 자가수리시(自家修理時)의 1회(回) 수리당(修理當) 소요시간(所要時間)은 디젤엔진이 10.66시간(時間)으로 석유(石油)엔진의 6.48시간(時間)보다 많았고 고장(故障)으로 인(因)하여 가동(稼動)하지 못한 시간(時間)은 석유(石油)엔진이 년간(年間) 대당(臺當) 99.4시간(時間)으로 디젤엔진의 88.67시간(時間)보다 많았다. (4) 동력경운기(動力耕耘機) 마력별(馬力別) 자가수리시(自家修理時)의 1회수리당(回修理當) 소요시간(所要時間)은 석유(石油)엔진 디젤엔진 공(共)히 8마력(馬力)이 가장 적어 석유(石油)엔진 3.78시간(時間)이었고 디젤엔진은 8.25시간(時間)이었다. (5) 동력경운기(動力耕耘機) 고장부위별(故障部位別) 자가수리시(自家修理時)의 1회수리당(回修理當) 소요시간(所要時間)은 시린더 계통(系統)이 가장 많은 32.02시간(時間)이었고 고장(故障)으로 인(因)하여 가동(稼動)하지 못한 시간(時間)은 시린더 계통(系統)이 가장 많아 년간(年間) 대당(臺當) 37.30시간(時間)이었다.
상엽의 수엽량을 견적하여 잠아의 사육량을 정하는데 이용하기 위하여 개량서반, 일지뢰, 노상, 수원상4호의 4품종의 상수를 재료로 지조장, 지조직경, 절수, 지조종중량, 지조중, 엽중 그리고 엽면적의 7개형질에 대한 조사 실험을 하였다. 조사항목별 평균치, 분산, 표준편차 등을 구하고 지조장과 수엽량, 지조직경과 수엽량, 절수와 수엽량 그리고 엽면적과 이들 형질과의 관계를 보고 수엽량을 견적할 수 있도록 수식을 유도하여 보았다. 실험결과를 요약하면 다음과 같다. 1. 지조장, 지조직경, 절수의 평균치, 분산, 표준편차 그리고 표준오차는 제1표와 같고 이들 평균치와 지조총중량 등을 보면 일지뢰가 제1 크고 개량서반이 다음이며 수원상4호, 노상의 순위로 되어 있으나 단위지당 엽면적은 일지뢰, 노상, 수원제4호, 개량서반의 순이고 1엽당 엽면적은 수원제4호, 노상, 일지뢰,개량서반의 순으로 되어있다. 2. 지조수에 의한 수엽량의 견적을 위하여는 y
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70