• Journal of Korean Medicine for Obesity Research
• /
• v.4 no.1
• /
• pp.1-11
• /
• 2004

Objectives: The effects of peroxisome proliferator-activated receptor ${\gamma}2\;(PPAR{\gamma}2)$ Pro12Ala (P12A) polymorphism on body mass index (BMI) and type 2 diabetes are well documented; however, until now, only a few studies have evaluated the effects of this polymorphism on body fat distribution. This study was conducted to elucidate the effects of this polymorphism on computed tomography (CT)-measured body fat distribution and other obesity-related parameters in Korean female subjects. Methods & Results: The frequencies of $PPAR{\gamma}2$ genotypes were: PP type, 93.0%; PA type, 6.8%; and AA type, 0.2%. The frequency of the A allele was 0.035. Body weight (P .012), BMI (P .012), and waist-to-hip ratio (WHR) (P .001) were significantly higher in subjects with PA/AA compared with subjects with PP. When body composition was analyzed by bioimpedance analysis, lean body mass and body water content were similar between the 2 groups. However, body fat mass (P .003) and body fat percent (P .025) were significantly higher in subjects with PA/AA compared with subjects with PP. Among overweight subjects with BMI of greater than 25, PA/AA was associated with significantly higher abdominal subcutaneous fat (P .000), abdominal visceral fat (P .031), and subcutaneous upper and lower thigh adipose tissue (P .010 and .013). However, among lean subjects with BMI of less than 25, no significant differences associated with $PPAR{\gamma}2$ genotype were found, suggesting that the fat-accumulating effects of the PA/AA genotype were evident only among overweight subjects, but not among lean subjects. When serum lipid profiles, glucose, and liver function indicators were compared among overweight subjects, no significant difference associated with $PPAR{\gamma}2$ genotype was found. Changes in body weight, BMI, WHR, and body fat mass were measured among overweight subjects who finished a 1-month weight lose program of a hypocaloric diet and exercise; no significant differences associated with $PPAR{\gamma}2$ genotype were found. Conclusions: The results of this study suggest that the $PPAR{\gamma}2$ PA/AA genotype is associated with increased subcutaneous and visceral fat areas in overweight Korean female subjects, but does not significantly affect serum biochemical parameters and outcomes of weight loss programs.

• Radiation Oncology Journal
• /
• v.18 no.4
• /
• pp.221-225
• /
• 2000

Purpose : This study was designed to examine the reliability of the new version of the AJCC staging system (1997) of nasopharyngeal carcinoma in comparison with the AJCC staging system of 1992. Materials and Methods :Between 1983 and 1996, 185 patients with histologically proven nasopnaryngeal carcinoma were treated with radiation therapy at the Department of Therapeutic Radiology Seoul National University Hospital. For these patients, AJCC staging system of 1992 was compared with the 1997 version by reviewing hospital records, computed tomography (CT) and/or magnetic resonance imaging (MRI). Results :5-year overall suwival rates according to the 1992 and 1997 AJCC staging systems were 100$\%$, and 100$\%$ at stage 1: 100$\%$, and 68.8$\%$ at stage 11; 61.4$\%$, and 63.8$\%$ at stage 111; 61.1$\%$, and 63.2$\%$ at stage IV. S-year overall survival rates of each classification showed significant differences between stages (p=0.0049 for the old version, p=0.01 for the new), but no significant difference was found between the staging systems except at stage 11. Conclusion : The new AJCC staging system allows staging as reliably as the 1992 version, but the adequacy of the newly modified staging classification should be confirmed by further clinical examination.

• Journal of International Society for Simulation Surgery
• /
• v.2 no.1
• /
• pp.26-32
• /
• 2015

Purpose When a surgeon examines the morphology of skull of patient, locations of craniometric landmarks of 3D computed tomography(CT) volume are one of the most important information for surgical purpose. The locations of craniometric landmarks can be found manually by surgeon from the 3D rendered volume or 2D sagittal, axial, and coronal slices which are taken by CT. Since there are many landmarks on the skull, finding these manually is time-consuming, exhaustive, and occasionally inexact. These inefficiencies raise a demand for a automatic localization technique for craniometric landmark points. So in this paper, we propose a novel method through which we can automatically find these landmark points, which are useful for surgical purpose. Materials and Methods At first, we align the experimental data (CT volumes) using Frankfurt Horizontal Plane (FHP) and Mid Sagittal Plane(MSP) which are defined by 3 and 2 cranial landmark points each. The target landmark of our experiment is the anterior nasal spine. Prior to constructing a statistical cubic model which would be used for detecting the location of the landmark from a given CT volume, reference points for the anterior nasal spine were manually chosen by a surgeon from several CT volume sets. The statistical cubic model is constructed by calculating weighted intensity means of these CT sets around the reference points. By finding the location where similarity function (squared difference function) has the minimal value with this model, the location of the landmark can be found from any given CT volume. Results In this paper, we used 5 CT volumes to construct the statistical cubic model. The 20 CT volumes including the volumes, which were used to construct the model, were used for testing. The range of age of subjects is up to 2 years (24 months) old. The found points of each data are almost close to the reference point which were manually chosen by surgeon. Also it has been seen that the similarity function always has the global minimum at the detection point. Conclusion Through the experiment, we have seen the proposed method shows the outstanding performance in searching the landmark point. This algorithm would make surgeons efficiently work with morphological informations of skull. We also expect the potential of our algorithm for searching the anatomic landmarks not only cranial landmarks.

• Journal of Korean Foot and Ankle Society
• /
• v.21 no.2
• /
• pp.61-65
• /
• 2017

Purpose: The purpose of this study was to determine the correlation and ratio between the calcaneal length and width for predicting the width of calcaneus. Materials and Methods: A total of 190 feet (190 patients) were included based on computed tomography scans. The length of calcaneus (CL) was measured on the line connecting the center of a circle tangent to the cortical margin in the anterior and posterior parts of the calcaneus in a sagittal plane (W1, W2). The width of the calcaneus was defined as the horizontal line of each part (W1, W2, W3) on the same axial plane. The relationship between the measurement was determined through a correlation analysis. The reliability was assessed based on intraclass correlation coefficients. Results: The CL and widths of calcaneus (W1, W2, W3) had a good positive correlation (r=0.848 [W1/CL], r=0.738 [W2/CL], r=0.769 [W3/CL]; p<0.001). The mean CL and widths ratios were 0.33 (W1/CL), 0.37 (W2/CL), and 0.37 (W3/CL). Using these ratios to estimate the widths by multiplying each ratio by the measured calcaneal length, we found a difference between the estimated calcaneal widths and the actual measured calcaneal widths values was 0.25 mm, 0.43 mm, and 0.16 mm. All measurements showed good-to-excellent inter- and intraobserver reliability. Conclusion: This study analyzed the correlation and ratio between the length and width of the calcaneus. The results will help orthopedic surgeons fixate screws in a stable manner to prevent iatrogenic injuries to the medial neurovascular structures of the calcaneus.

• Imaging Science in Dentistry
• /
• v.39 no.3
• /
• pp.133-147
• /
• 2009

Purpose : To investigate the reproducibilities and compare the measurements in digital and MDCT-synthesized cephalometric radiograph, and to investigate the effect of head position on the measurement during imaging with MDCT. Materials and Methods : Twenty-two dry skulls (combined with mandible) were used in this study. Conventional digital cephalometric radiograph was taken in standard position, and MDCT was taken in standard position and two rotated position ($10^{\circ}$ left rotation and $10^{\circ}$ right tilting). MDCT data were imported in $OnDemand^{(R)}$ and lateral cephalometric radiograph were synthesized from 3D virtual models. Two types of rotated MDCT data were synthesized with default mode and with corrected mode using both ear rods. For all six images, sixteen angular and eleven linear measurements were made in V-$Ceph^{(R)}$ three times. Reproducibility of measurements was assessed using repeated measures ANOV A and ICC. Linear and angular measurements were compared between digital and five MDCT-synthesized images by Student t-test. Results : All measurements in six types of cephalometric radiograph were not statistically different under ICC examination. Measurements were not different between digital and MDCT-synthesized images (P>.05). Measurements in MDCT-synthesized image in $10^{\circ}$ left rotation or $10^{\circ}$ right tilting position showed possibility of difference from digital image in some measurements, and possibility of improvement via realignment of head position using both ear rods. Conclusion : MDCT-synthesized cephalometric radiograph can substitute conventional cephalometric radiograph. The error on head position during imaging with MDCT have possibility that can produce measurement errors with MDCT-synthesized image, and these position error can be corrected by realignment of the head position using both ear rods.

• The korean journal of orthodontics
• /
• v.35 no.2 s.109
• /
• pp.91-105
• /
• 2005

For af accurate diagnosis and treatment planning of facial asymmetry, the use of 3-dimensional (3-D) image is indispensable. The purpose of this study was to get standard data for the 3-D analysis of facial asymmetry Computerized tomography (CT) was taken in the 60 normal occlusion individuals (30 male. 30 female) who did not have any apparent facial asymmetry. The acquired 2D CT DICOM data were input on a computer, and the reformatted 3-D images were created using a 3-D image software. Twenty three measurements were established in order to evaluate asymmetry; 15 ;omear measurements (6 for ramus length. 1 for condylar neck length, and 8 for mandibular body length) and 8 angular measurements (4 for gonial angle. 2 for frontal ramal inclination. and 2 for lateral ramal inclination) The right aid left difference of each measurement was calculated and analyzed. It is suggested that the right and left differences of the measurements obtained from the study could be used as references for the diagnosis of facial asymmetric patients.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.5
• /
• pp.511-517
• /
• 2007

Purpose: The aim of this study is to determine whether a difference in the amount of bone graft material is needed between edentulous patients and dentulous patients and to calculate the amount of augmentation for a sinus lift procedure. Methods: 19 patients(20 sinuses) were included to measure maxillary sinus volume. Facial CT scanning was performed using MX 8000 IDT CT devices(Philips, USA). And it was used for IDLvm(The IDL Virtual Machine) 6.0, CT Volume Analyzer Ver 2.3 program to measure maxillary sinus volumes Results: At edentulous patients, volumes(mean${\pm}SD$) of the inferior portion of the sinuses were $0.56{\pm}0.13cm^3$(5mm height), $2.35{\pm}0.57cm^3$(10mm height), $4.85{\pm}1.10cm^3$(15mm height). At dentulous patients, volumes(mean${\pm}SD$) of the inferior portion of the sinuses were $0.41{\pm}0.18cm^3$(5mm height), $1.76{\pm}0.42cm^3$(10mm height), $3.80{\pm}0.84cm^3$ (15mm height). A significant correlation was found between augmentation height(5mm, 10mm, 15mm) and the calculated sinus volume.(p=0.027, p=0.018, p=0.044) Conclusions: A significant correlation was found between augmentation height(5mm, 10mm, 15mm) and the calculated sinus volume. Detailed preoperative knowledge of sinus lift augmentation volume is helpful in determining the appropriate amount of the bone graft material.

• Journal of Radiation Protection and Research
• /
• v.42 no.1
• /
• pp.9-15
• /
• 2017

Background: The purpose of this study is to assign an appropriate density to virtual phantom for 2D diode array detector with different dose calculation algorithms to guarantee the accuracy of patient-specific QA. Materials and Methods: Ten VMAT plans with 6 MV photon beam and ten VMAT plans with 15 MV photon beam were selected retrospectively. The computed tomography (CT) images of MapCHECK2 with MapPHAN were acquired to design the virtual phantom images. For all plans, dose distributions were calculated for the virtual phantoms with four different materials by AAA and AXB algorithms. The four materials were polystyrene, 455 HU, Jursinic phantom, and PVC. Passing rates for several gamma criteria were calculated by comparing the measured dose distribution with calculated dose distributions of four materials. Results and Discussion: For validation of AXB modeling in clinic, the mean percentages of agreement in the cases of dose difference criteria of 1.0% and 2.0% for 6 MV were $97.2%{\pm}2.3%$, and $99.4%{\pm}1.1%$, respectively while those for 15 MV were $98.5%{\pm}0.85%$ and $99.8%{\pm}0.2%$, respectively. In the case of 2%/2 mm, all mean passing rates were more than 96.0% and 97.2% for 6 MV and 15 MV, respectively, regardless of the virtual phantoms of different materials and dose calculation algorithms. The passing rates in all criteria slightly increased for AXB as well as AAA when using 455 HU rather than polystyrene. Conclusion: The virtual phantom which had a 455 HU values showed high passing rates for all gamma criteria. To guarantee the accuracy of patent-specific VMAT QA, each institution should fine-tune the mass density or HU values of this device.

• Journal of Magnetics
• /
• v.21 no.2
• /
• pp.293-297
• /
• 2016

For mastectomy patients, sufficient doses of radiation should be delivered to the surface of the chest wall to prevent recurrence. A bolus is used to increase the surface dose on the chest wall, whereby the surface dose is confirmed with the use of a virtual bolus during the computerized treatment-planning process. The purpose of this study is an examination of the difference between the dose of the computerized treatment plan and the dose that is measured on the bolus. Part of the left breast of an Anderson Rando phantom was removed, followed by the attainment of computed tomography (CT) images that were used as the basis for computerized treatment plans that were established with no bolus, a 3 mm-thick bolus, a 5 mm-thick bolus, and a 10 mm-thick bolus. For the computerized treatment plan, a prescribed dose regimen was dispensed daily and planning target volume (PTV) coverage was applied according to the RTOG 1304 guidelines. Using each of the established computerized treatment plans, chest-wall doses of 5 points were measured; this chest-wall dose was used as the standard for the analysis of this study, while the level of significance was set at P < 0.05. The measurement of the chest-wall dose with no bolus is 1.6 % to 10.3 % higher, and the differences of the minimum average and the maximum average of the five measurement points are -13.8 and -1.9, respectively (P < 0.05); however, when the bolus was used, the dosage was measured as 3.7 % to 9.2 % lower, and the differences of the minimum average and the maximum average are 7.4 and 9.0, -1.2 and 17.4, and 8.1 and 19.8 for 3 mm, 5 mm, and 10 mm, respectively (P < 0.05). As the thickness of the bolus is increased, the differences of the average surface dose are further increased. There are a variety of factors that affect the surface dose on the chest wall during post-mastectomy radiation therapy, for which verification is required; in particular, a consideration of the appropriate thickness and the number of uses when a bolus is used, and which has the greatest effect on the surface dose on the chest wall, is considered necessary.

• Tuberculosis and Respiratory Diseases
• /
• v.68 no.2
• /
• pp.67-73
• /
• 2010

Background: In previous study, most patients with bronchial anthracofibrosis (BAF) were non-miners, and non-occupational old aged females. However, the clinical significance of BAF in patients with coal workers' pneumoconiosis (CWP) is unknown. Methods: Among patients with CWP who transferred to our hospital for an evaluation of associated pulmonary diseases, 32 patients who had undergone a bronchofibroscopy (BFS) and chest computed tomography (CT) examination were evaluated for the association of the BAF using a retrospective chart review. Results: Nine of the 32 CWP patients (28%) were complicated with BAF. Four of the 16 simple CWP patients (25%) were complicated with BAF. According to the International Labor Organization (ILO) classification by profusion, 2 out of 3 patients in category 1, 1 out of 8 patients in category 2 and 1 out of 3 patients in category 3 were complicated with BAF. Five out of 16 complicated CWP patients were complicated with BAF. Three out of 7 patients in type A and 2 out of 5 patients in type C were complicated with BAF. CWP patients with BAF had significantly greater multiple bronchial thickening and multiple mediastinal or hilar lymph node enlargement than the CWP patients without BAF. There was no difference in the other clinical features between the CWP patients with BAF and those without BAF. Conclusion: Many CWP patients were complicated with BAF. The occurrence of BAF was not associated with the severity of CWP progression. Therefore, a careful evaluation of the airway with a bronchoscopy examination and chest CT is warranted for BAF complicated CWP patients who present with respiratory symptoms and signs, even ILO class category 1 simple CWP patients.