• Journal of the Korean Ceramic Society
• /
• v.31 no.11
• /
• pp.1315-1322
• /
• 1994

In this study, stable PbTiO3 coating solution was prepared using diethanolamine(DEA) complexing agent and deposited on indium-tin oxide(ITO) coated glass substrate. Prepared thin films were dense and crack-free. Perovskite-type PbTiO3 thin films could be obtained above 50$0^{\circ}C$, while the films heat-treated above $650^{\circ}C$ showed undesired properties due to interface reactions between films and substrates and warpage phenomena of substrates. Measured maximum dielectric constant and loss tangent were found to be 144 and 0.0163 at 1 kHz, 55$0^{\circ}C$ heat-treatment, respectively.

• Journal of the Korean Ceramic Society
• /
• v.33 no.6
• /
• pp.623-630
• /
• 1996

A Sol-gel derived ferroelectric PbTiO3 thin film was synthesized by using diethanolamine (DEA) as a comple-xing agent. Surface chemical analyses were examined in order to study the effect of heating temperature on the composition of thin film by EPMA and XPS. A rapid volatilization of lead was observed in the films fired at $700^{\circ}C$ or higher and the ratio of Pb:Ti was found to be 34:66. A depth profile by Ar+ showed that the Ar sputtering decreased Pb amount of inner part of the film resulting in Ti-rich phase near the surface of the film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.277-277
• /
• 2010

We present facile chemical route stabilizing dispersion of carboxylated single-Walled carbon nanotubes (SWCNTs) in ZnOsol prepared by using diethanolamine as a stabilizer. The dispersion was stabilized via capping of carboxyl groups on the SWCNT surface by a titania layer. We also demonstrated that the conductivity of the films prepared P3/$TiO_2$/ZnO as enhanced by therml treatment, and the thermal stbility of the film improved hybridization with ZnO sol pristine P3, P3/$SiO_2$ and P3/$TiO_2$ hybrid films.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.03b
• /
• pp.41-41
• /
• 2010

We present facile chemical route stabilizing dispersion of carboxylated single-walled carbon nanotubes (SWCNTs) in ZnOsol prepared by using diethanolamine as a stabilizer. The dispersion was stabilized via capping of carboxyl groups on the SWCNT surface by a titania layer. We also demonstrated that the conductivity of the films prepared P3/$TiO_2$/ZnO as enhanced by therml treatment, and thethermal stbility of the film improved hybridization with ZnO sol pristine P3, P3/$SiO_2$ and P3/$TiO_2$ hybrid films.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.1
• /
• pp.72-78
• /
• 2000

The major cause of paper deterioration is the acid-catalyzed hydrolysis of the cellulose in paper fibres. The deacidification of paper reduced the rate of this deterioration, and it has been reported to extend the useful life of acidic paper by three to five times. It has been recognized the need for an effective method of deacidifying large quantities of books and documents. T도 review of the current state of deacidification technology has been published recently. The paper points to the immediate need for a cost-effective and reliable method to save the millions of books that prish every year. It was tried to deacidify by the gaseous ethanolamine for solving with the above the problem. Acidic paper was treated with the monoethanolamine, diethanolamine, triehtanolamine. It result, it was found that the rate of deacidification was in caused very little grightness and fold endurances. For solving this problem, it was carried with deacidify by combination treatment of the various gaseous ehtnaloamines. In result, decreasing of brightness and fold endurance is reduced.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.14 no.1
• /
• pp.1-15
• /
• 1988

A new method for liquid chromatography with post column reaction is suggested for the separation and quantification of tertiary amines. A mixture of triethanolamine and N-ethyl diethanolamine was separated by a strong cation exchange column, followed by spectrophtometric detection of the blue colors generated from the reaction of each amine with the Folin-Ciocalteau reagent. The tertiary amines were properly separated when an eluent of pH 9.5 containing 0.5M sodium nitrate was used. Under this condition, calibration curve of triethanolamine in 2-10mg/100ml concentration range was attained. Good results were obtained when cream and shampoo preparations containing known amount of triethanolamine were analysed according to this method. In case the sample did not contain any other interfering reducing substances, the amine was quantitatively determined by the simple reaction of the samples with Folin-Ciocalteau reagent, and the subsequent spectrophotometric measurement.

• Journal of Environmental Science International
• /
• v.2 no.1
• /
• pp.85-90
• /
• 1993

The reaction rate of $CO_2$ with 2-amino-2-methyl-1-propanol (AMP), MEA monoethanolamine (MEA) and diethanolamine (DEA) in aqueous solutions has been determined using a stirred vessel with a plane gas-liquid interface over a wide range of concentrations of amines at different temperatures. The results show that the overall reaction rate is first order with respect to both $CO_2$ and amino. The reaction rate constant varies with temperature according to the relationship which agrees with the experimental data. The proposed interpretation is that the kinetic rate determining step is a reaction of $CO_2$ with amine to form carbamic acid which is then totally and immediately ionized.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.575-580
• /
• 2020

In this study, we simulated an amine regeneration process with heat-stable salts removal unit. We derived the optimal operating conditions considering the flow rate of waste, the removal rate of heat-stable salts, and the loss rate of MDEA (methyl diethanolamine). In the amine regeneration process that absorbs and removes acid gas, heat-stable salt impairs the absorption efficiency of process equipment and amine solution. An ion exchange resin method is to remove heat-stable salts through neutralization by using a strong base solution such as NaOH. The acid gas removal process was established using the Radfrac model, and the equilibrium constant of the reaction was calculated using Gibbs free energy. The removed amine solution is separated and flows to the heat-stable salts remover which is modeled by using the Rstoic model with neutralization reaction. Actual operation data and simulation results were compared and verified, and also a case study was conducted by adjusting the inflow mass of removal unit followed by suggesting optimal conditions.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.135-140
• /
• 2012

In this study, the heats of absorption of $CO_2$ with aqueous solutions of primary, secondary and tertiary amine aqueous solutions were measured in the commercial reaction calorimeter SIMULAR (HEL, UK). The heats of absorption of 30 wt% amine aqueous solutions of MEA (monoethanolamine, primary amine), EAE(2-(ethylamino)ethanol, secondary amine), and MDEA (methyldiethanolamine, tertiary amine) were measured as function of the $CO_2$ loading ratio at $40^{\circ}C$, in each case. In addition, the heats of absorption of sterically-hindered amine aqueous solutions of AMP(2-amino-2-methyl-1-propanol, primary amine), DEA(diethanolamine, secondary amine) and TEA(triethanolamine, tertiary amine) were measured to observe the steric hindrance effect. The heat of absorption is high in the following order regardless of the steric hindrance: primary amine > secondary amine > tertiary amine. The heats of absorption of amines having sterically-hindered substituents surrounding nitrogen atoms are relatively low compare to that of sterically-free amines, although the difference is very small.

• Korean Chemical Engineering Research
• /
• v.51 no.4
• /
• pp.426-431
• /
• 2013

Nanosized $TiO_2$ particles were prepared from titanium (IV) sulfate solution using base solutions at low reaction temperature ($95^{\circ}C$) and atmospheric pressure by hydrothermal precipitation method without calcination. The effects of preparation conditions, such as kind of base solutions (NaOH, $NH_4OH$, Monoethanolamine, Diethanolamine, Triethanolamine) and surfactants (CTAB, Span 20, SDBS), concentration of surfactants, temperature and pH, on the physical properties of $TiO_2$ particles have been investigated by XRD, SEM and Zeta-potential meter. Absorption area was also investigated by DRS in order to confirm the photocatalytic activity of the nanosized $TiO_2$ particles. It was turned out that, among base solutions, NaOH provides the smallest $TiO_2$ particles with excellent crystallinity. And cationic surfactant (CTAB) prepared smaller $TiO_2$ particles than any other surfactants. When CTAB is added in the concentration ratio of $Ti(SO_4)_2$:CTAB=10:1, $TiO_2$ particles with particle diameter of 5.8 nm were prepared. This is approximately 1/10 of that prepared without CTAB.