• 제목/요약/키워드: Diesel Power Plant

검색결과 117건 처리시간 0.032초

철도용 연료전지 및 유도급전을 이용한 Hybrid system 연구 (The Study of Hybrid system using FC and IPT for Railway system)

  • 한경희;이병송;박현준;권삼영;백수현
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.218-220
    • /
    • 2008
  • Urban air quality, including carbon-dioxide emissions, and national energy security are related issues affecting the rail industry and transportation sector as a whole. They are related by the fact that (in the United States) 97-98% of the energy for the transport sector is based on oil, and more than 60% is imported. A fuelcell locomotive combines the environmental advantages of a catenary-electric locomotive with the higher overall energy efficiency and lower infrastructure costs of a diesel-electric. Catenaryelectric locomotives, when viewed as only one component of a distributed machine that includes an electricity-generating plant and transmission lines, are the least energy-efficient locomotive type. The natural fuel for a fuelcell is hydrogen, which can be produced from many renewable energies and nuclear energy, and thus a hydrogen-fuelcell locomotive will not depend on imported oil for its energy supply. This paper proposes a base models of Hybrid fuel cell/IPT railway vehicle power system, the necessary of this research.

  • PDF

비상디젤발전기의 회전체 및 구조물 해석적 건전성 평가에 관한 연구 (A Study of Analytical Integrity Estimations for the Structure and Rotor System of an Emergency Diesel Generator)

  • 김재실;최헌오;정훈형
    • 한국소음진동공학회논문집
    • /
    • 제24권2호
    • /
    • pp.79-86
    • /
    • 2014
  • 이 논문에서는 비상디젤발전기의 구조물 및 내부 회전체에 대한 건전성 평가를 위한 해석적 방법을 제시한다. 비상발전기는 원자력발전소 안전과 관련된 매우 중요한 기기로써 지진과 같은 비상사태에 원전의 안전 정지를 위한 관련 기기에 비상 전원을 공급한다. 비상발전기의 회전기 부분 또한 지진과 같은 충격에도 안전성을 확보해야 한다. 비상발전기 본체에 대한 모달 해석을 하여 공진 주파수가 지진 주파수 영역에 있는지를 확인하여 응력 해석의 방법을 정했다. 회전체 부분의 안전성은 저널 베어링의 필름 두께와 임계 회전수를 계산하여 최소 유막 요구치와 운전속도와 비교하여 안전성을 판단하였다. 계산된 응력해석의 최대치는 허용치보다 작았으며, 저널 베어링의 유막과 회전수 또한 안전한 범위에 들었다. 이 논문에서는 저널 베어링의 안전해석에 지진하중을 정적 하중으로 보았으나 향후 연구에 있어서는 지진하중의 동적 특성을 회전체에 적응하는 새로운 해석적 방법의 개발이 필요할 것으로 사료된다.

발전소 폐열을 이용한 농업시설용 히트펌프시스템의 난방 성능 분석 (Heating Performance Analysis of the Heat Pump System for Agricultural Facilities using the Waste Heat of the Thermal Power Plant as Heat Source)

  • 강연구;강석원;백이;김영화;장재경;유영선
    • 생물환경조절학회지
    • /
    • 제26권4호
    • /
    • pp.317-323
    • /
    • 2017
  • 쓰레기 소각장이나 산업체의 폐열을 농업에 활용한 사례는 몇몇 있었다. 그러나 온배수를 농업에 활용한 사례는 전무하였으며, 치어, 종패 등을 양식하는 수산업이 대부분이었다. 본 연구에서는 화력발전소의 온배수(폐열)를 열원으로 이용하는 120 RT 규모의 냉난방시스템을 제주특별자치도 서귀포시 안덕면 소재의 $5,280m^2$ 아열대 작물(망고) 재배온실에 설치, 10월에서 다음해 2월까지 약 5개월 동안 난방을 실시하여 난방에너지 비용 절감 효과 등 분석하였다. 난방에너지 비용 절감효과는 면세경유에 대하여 87%이였으며, 또한 발전소의 온배수를 에너지원으로 재활용함으로서 62%의 이산화탄소 배출 저감 효과를 얻었다. 본 연구를 계기로 2015년에 해수가 수열에너지 분야로 재생에너지에 포함되었다. 해수의 표층의 열을 히트펌프를 사용하여 변환시켜 얻은 에너지라는 수열에너지 분야의 기준과 범위를 볼 때, 이는 온배수가 재생에너지에 포함되었다고 말해도 과언이 아닐 것으로 사료된다. 그 이유는 온배수도 해수임에도 불구하고 온도가 일반 해수보다 $7{\sim}8^{\circ}C$ 높아, 일반 해수를 히트펌프의 열원으로 이용하는 것보다 온배수를 열원으로 이용했을 때 히트펌프의 성능이 높기 때문이다. 또한 같은 해 농식품부의 폐열 재이용 시설 지원 사업이 발표되어, 발전소 온배수뿐만 아니라 산업체와 소각장의 폐열을 농업에 활용하면 지원을 받을 수 있게 되었다. 이 사업에 의하여 2015년 당진시, 하동군, 제주시, 곡성군이 선정되었으며, 2016년 태안군, 서귀포시 등이 선정되어, 2016년 말 곡성군과 제주시가 공사를 완료, 농업에 폐열을 활용하고 있으며(제주시는 발전소, 곡성군은 산업체 폐열을 이용하고 있음), 기타 지역은 추진 중이다.

함정의 통합 전력시스템 구성에 관한 연구 (A study on the arrangement of integrated power system for warship)

  • 백현민;정균식;이명호;최재성
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권9호
    • /
    • pp.1070-1074
    • /
    • 2014
  • IEEE 1662(2009)에 따르면 통합 전력 시스템(이하 IPS)은 함정의 모든 동력기관(Prime mover)이 전력만을 생산하고 생산된 전력을 통합하여 추진과 무기체계, 함정 내 소요처에 공급하는 체계를 말한다. IPS의 특징은 원동기 배치의 유연성, 원동기와 추진기의 기계적인 분리, 에너지전환 및 전달의 여유 증가 그리고 미래 전자무기의 사용을 위하여 재분배가 가능한 전력의 유연성들이다. IPS는 동력기관이 최적부하에서 운전될 수 있도록 전력생산단계를 다양하게 가질 수 있다. 본 연구는 IPS의 원동기 구성 방식에 따른 적합성을 정량적으로 평가할 수 있는 평가 인자와 평가 방법에 대한 연구이다. 즉, 구축함급 함정에 발전용 디젤 기관과 발전용 가스터빈 기관으로 구성되는 IPS를 운용할 경우를 가상하여, IPS 동력 시스템의 다양한 구성 방법들의 특징을 비교 분석하여 평가함으로써 IPS를 최적화할 수 있는 방안에 관하여 연구하였다. 평가 인자는 동력 시스템의 최적화 대상인 전투 능력과 경제성 두 요소를 고려하여 검토하였다.

수도권 지역에서 기상-대기질 모델링을 위한 VOC와 PM2.5의 화학종 분류 및 시간분배계수 산정 (Estimation of Chemical Speciation and Temporal Allocation Factor of VOC and PM2.5 for the Weather-Air Quality Modeling in the Seoul Metropolitan Area)

  • 문윤섭
    • 한국지구과학회지
    • /
    • 제36권1호
    • /
    • pp.36-50
    • /
    • 2015
  • 본 연구의 목적은 휘발성 유기화합물(VOC)과 먼지(PM)의 배출원 프로파일로부터 화학종 분류를 할당하고, 성김 행렬 조작자 핵심 배출량 시스템(SMOKE) 내에 배출원 분류코드에 따른 배출원 프로파일의 화학종 분류와 시간분배계수를 수정하는 것이다. 기솔린, 디젤 증기, 도장, 세탁, LPG 등과 같은 VOC 배출원 프로파일로부터 화학 종 분류는 탄소 결합 IV (CBIV) 화학 메커니즘과 주 규모 대기오염연구센터 99 (SAPRC99) 화학 메커니즘을 위해 각각 12종과 34종을 포함한다. 또한 토양, 도로먼지, 가솔린, 디젤차, 산업기원, 도시 소각장, 탄 연소 발전소, 생체 연소, 해안 등과 같은 PM2.5 배출원 프로파일로부터 화학종 분류는 미세 먼지, 유기탄소, 원소 탄소, 질산염과 황산염의 5종으로 할당하였다. 게다가 점 및 선 배출원의 시간 프로파일은 2007년 수도권 지역에서의 굴뚝 원격감시시스템(TMS)과 시간별 교통 흐름 자료로부터 구하였다. 특별히 점 배출원에 있어 오존 모델링을 위한 시간분배계수는 굴뚝 원격감시시스템 자료의 $NO_X$ 배출량 인벤토리에 근거하여 추정하였다.

디메틸에테르 합성 반응의 실험적 연구 (Experimental Study on the Synthesis of Dimethyl Ether)

  • 최창우;조원일;백영순;노경호
    • 공업화학
    • /
    • 제17권2호
    • /
    • pp.125-131
    • /
    • 2006
  • 디메틸에테르(이하 DME)는 환경에 친화적인 새로운 청정에너지이다. 또한 DME는 다양한 에너지원으로부터 제조 되어지며, 그 에너지원으로는 천연가스, 석탄, 바이오매스, 폐플라스틱 등이 있다. 이런 DME는 LPG와 매우 유사한 성질을 특징으로 가지고 있다. 이러한 결과로 DME는 LPG, 연료전지, 발전연료, 특히 디젤의 대체 연료로 고려되고 있으며, 2010년 대체 에너지로 기대되고 있다. DME 직접합성반응의 반응속도를 측정하기 위하여 서로 다른 조건인 온도 $220{\sim}280^{\circ}C$, 합성가스 비율 1.2~3.0에서 실험을 수행하였다. 모든 실험은 혼성촉매를 사용하여 수행하였으며, 혼성촉매는 메탄올 합성 촉매와 메탄올 탈수촉매가 포함되어 있다. 반응속도는 랭미어-힌쉘우드 타입의 반응 메커니즘을 따르며, 메탄올 합성반응, 메탄올 탈수반응, 수성가스 전환반응, 이 세 가지 반응의 메커니즘을 고려하였다. 각 반응의 반응속도는 촉매상의 표면반응과 수소와 메탄올, 그리고 물의 해리흡작으로 결정하였다.

원자력 추진 잠수함의 특성과 농축우라늄 사용 (The characteristics of nuclear powered submarine and the use of enriched uranium)

  • 장준섭
    • Strategy21
    • /
    • 통권41호
    • /
    • pp.261-293
    • /
    • 2017
  • Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.