• Journal of Mechanical Science and Technology
• /
• 제14권5호
• /
• pp.569-581
• /
• 2000

A cycle simulation program is developed and its predictions are compared with the test bed measurements of a direct injection (DI) diesel engine. It is based on the mass and energy conservation equations with phenomenological models for diesel combustion. Two modeling approaches for combustion have been tested; a multi-zone model by Hiroyasu et al (1976) and the other one coupled with an in-cylinder flow model. The results of the two combustion models are compared with the measured imep, pressure trace and NOx and soot emissions over a range of the engine loads and speeds. A parametric study is performed for the fuel injection timing and pressure, the swirl ratio, and the squish area. The calculation results agree with the measured data, and with intuitive understanding of the general operating characteristics of a DI diesel engine.

• 동력기계공학회지
• /
• 제12권5호
• /
• pp.34-39
• /
• 2008

The combustion purpose of diesel engine is to reduce the emission of green gas and to produce high output. Generally, the regulation matter of emission gas is largely diveded by 'THC', 'NOx', 'CO' and 'PM'. Among those matters, the most problem is to disgorge into 'PM', the character of diesel combustion. Diesel PM can be controlled using Diesel Particulate Filter, which can effectively reduce the level of soot emissions to ambient background levels. $NO_2$ generated by the DOC is used to combust the carbon collected in the DPF at low temperature. To certificate DPF device that is suitable to domestic circumstances, it is necessary to exactly evaluate the DPF devices according to the regulation of DPF certificate test procedure fur retrofit. To do carry out the above-mentioned description the understanding of that regulation like the standard of PM reduction is needed. In this study the test procedure including test cycle and BPT test condition was examined, and also the test result for specific DPF was analyzed. In every test like field test, PM reduction efficiency test and Seoul-10 mode test, no defect was showed.

• 대한기계학회논문집B
• /
• 제34권6호
• /
• pp.615-622
• /
• 2010

본 연구에서는 중형 직분식 선박용 엔진의 성능 및 NOx 배출물 예측을 위한 0-D multi-zone 분무 연소 모델이 개발되었다. 모델은 상용 1-D 사이클 해석 프로그램 (Boost)와 연동할 수 있도록 개발되었으며, 흡배기 시스템을 포함한 엔진 전체에 대한 동시 해석이 가능하였다. 연소 모델은 Fortran90 으로 개발되었으며, AVL 에서 제공된 'user defined high pressure cycle (UDHPC) interface'를 통해 Boost 와 연동되었다. 두 가지의 인젝터(8 홀, 10 홀)에 대해 두 가지 부하에서 해석을 수행하였으며, 해석 결과는 실제 엔진의 성능 실험 결과를 잘 추종하였다.

• 한국철도학회논문집
• /
• 제8권3호
• /
• pp.260-266
• /
• 2005

The deterioration of a shunting locomotive was characterized for the lifetime assessment. The locomotive has been used for shunting works in steel making processes, and in this investigation, various types of technical evaluation methods for the locomotive parts were employed to assess the current deterioration status and to provide important clue for lifetime prediction. Unlike other rolling stocks in railway applications, the diesel shunting locomotive is composed of major components such as diesel engine, transmission, gear box, brake system, electronic devices, etc., which cover more than 70 percent of the total price of the locomotive. Therefore, in this paper, each part of major components in the diesel locomotive was analyzed in terms of the degree of deterioration. The lift-cycle-cost (LCC) analysis was performed based on the maintenance and repair history as compared with economical cost to provide the cost-effective prediction, i.e., to assess either repair for reuse or putting the locomotive out of service based on cost-effective calculation.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.824-829
• /
• 2001

The main objective of the study is to provide the criteria for determining the proper life cycle of rebuiled diesel-electric locomotive currently being operated in KNR. We predicted the most critical sections of the underframes and tested the diesel-electric locomotive vehicle to measure dynamic stresses applied to the underframes. The fileld test of the diesel-electric locomotive estimated 17.08years based on the fatigue-life estimation when they are continuously used in the present operation condition.

• International Journal of Automotive Technology
• /
• 제5권3호
• /
• pp.165-172
• /
• 2004

Phenomenological models for direct injection diesel engine emissions including NO, soot, and HC were implemented into a full engine cycle simulation and validated with experimental data obtained from representative heavy-duty DI diesel engines. The cycle simulation developed earlier by Jung and Assanis (2001) features a quasi-dimensional, multi-zone, spray combustion model to account for transient spray evolution, fuel-air mixing, ignition and combustion. In this study, additional models for HC emissions were newly implemented and the models for NO, soot, and HC emissions were validated against experimental data. It is shown that the models can predict the emissions with reasonable accuracy. However, additional effort may be required to enhance the fidelity of models across a wide range of operating conditions and engine types.

• 한국분무공학회지
• /
• 제12권1호
• /
• pp.65-70
• /
• 2007

This paper is to investigate the characteristics of exhaust emissions and nano-particle emission from diesel passenger vehicle according to using biodiesel fuel as an alternative fuel. In this work, the particulate matters (PM) of exhaust emissions in diesel engine were investigated by number of particles and mass measurement. The mass of the total PM was measured using the standard gravimetric measurement method, the total number concentrations were measured on a ECE15+EUDC driving cycle using Condensation Particle Counter (CPC). Total PM emission was reduced $2{\sim}38%$ and number concentration was reduced $1{\sim}27%$ according to increasing blended ratio of biodiesel with diesel fuel. Total PM emission was reduced more than particle number emission because volatile particles were measured in total PM but were not measured in particle number emissions.

• 한국소음진동공학회논문집
• /
• 제24권5호
• /
• pp.407-413
• /
• 2014

The diesel engine and reduction gear combination is one of the common propulsion system in a naval vessel. Since the diesel engine has torsional vibration caused by reciprocating motion of the mass and gas pressure force of the cylinder, high cycle torsional fatigue can be occurred. Therefore, ROK navy restricts the maximum stress of the propulsion shaft according to MIL G 17859D. In this paper, the root cause for the failure of the diesel engine and reduction gear connecting shaft occurred in typical naval vessel is investigated based on the measured bending and torsional moment according to MIL G 17859D procedure.

• 한국대기환경학회지
• /
• 제26권5호
• /
• pp.499-506
• /
• 2010

Recently, a great deal of attention have been directed to the use of alternative fuels as a means to reduce vehicular emissions. As one of the promising alternative fuels, bio-diesel has advantages of a wide adaptability without retrofit of diesel engine. It is also effective enough to reduce CO, THC, $SO_x$, polycyclic aromatic hydrocarbons (PAHs) and PM. In this study, we investigated the emission characteristics of biofuels between different operating conditions, i.e., engine speed (1,400 rpm and 2,300 rpm), engine load (10% and 100%), bio-diesel blending (BD0, BD5 and BD20), and recirculation (EGR) rate of exhaust gas (0% and 20%). Relative performance of the system was evaluated mainly for the greenhouse gases ($CH_4$, $N_2O$ and $CO_2$). In addition, emission characteristics of ND-13 mode were also tested against both greenhouse gases and other airborne pollutants under emission regulation. The relative composition of bio-diesel has shown fairly clear effects on the emission quantities of CO, THC, and PM emission, although it was not on $NO_x$ and greenhouse gases. EGR rate has shown trade-off characteristics between $NO_x$ and PM.

• 청정기술
• /
• 제14권2호
• /
• pp.144-151
• /
• 2008

천연가스로부터 합성가스를 거쳐 제조되는 디메틸에테르가 디젤 대체연료로서 가지는 환경적 가치를 평가하기 위하여 전과정평가를 실시하였다. 전과정평가를 위한 시스템 경계 안에는 디젤과 디메틸에테르 두 물질에 대한 원료 물질의 획득부터 연소를 통한 최종 소비까지의 과정이 포함되었다. 디젤과 디메틸에테르 각각에 대한 목록분석을 실시한 결과 천연자원의 소모와 대기오염물질의 배출이 두 물질과 관련된 가장 중요한 환경오염인자라는 것을 알 수 있었다. 두 물질에 대한 영향평가의 결과로부터 인간의 건강과 생태계 보전이라는 측면에서는 디메틸에테르가 환경적으로 우수하지만 천연자원의 고갈이라는 측면에서는 디젤이 보다 우수함을 알 수 있었다. 목록분석과 영향평가의 결과를 바탕으로 디젤 대체연료로서 디메틸에테르가 가지는 환경적 가치를 제고하기 위한 방안을 제시하였다.