• 한국정보통신학회논문지
• /
• 제8권4호
• /
• pp.886-893
• /
• 2004

본 논문에서는 트랜지스터를 이용해서 이득을 갖는 능동 대역 통과 필터, 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기를 설계 제작하였다. 제안된 능동 공진 발진기는 ISM 대역의 국부 발진기로 사용 가능하도록 5.5GHz의 발진주파수를 갖도록 설계하였다. 설계된 능동 공진 발진기는 유전율 3.38, 유전체 두께 0.508mm, 금속 두께 0.018mm인 기판 위에 구현하였다. 이득을 갖는 능동 대역 통과 필터를 이용한 능동 공진 발진기는 5.6GHz의 발진주파수와 -2Bm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -81dBc/Hz이다. 부성저항 특성을 갖는 능동 공진기를 이용한 능동 공진 발진기는 5.8GHZ의 발진주파수와- 4dBm의 출력과 100kHz 옵셋에서의 위상잡음 특성은 -91dBc/Hz이다.

• 한국IT서비스학회지
• /
• 제13권1호
• /
• pp.135-146
• /
• 2014

In this paper, an antenna has been proposed for the operation of mobile devices such as Zigbee. The presented rectenna operates at ISM (Industrial Scientific Medical) band of 2.45 GHz and consists of $2{\times}2$ array patch antenna and Villard voltage double rectifier circuit for high conversion efficiency. $2{\times}2$ array patch antenna is fabricated in FR4 substrate having thickness of 1.6mm and dielectric constant of 4.7. The proposed $2{\times}2$ array patch antenna resonates at 2.56GHz with return loss of 38.36dB, VSWR of 1.0244, and its impedance is matched to $50{\Omega}$. The fabricated rectenna has maximum conversion efficiency of 59.8% at an input power lever of 15dBm and load resistance of $500{\Omega}$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.82-85
• /
• 2002

In recent years, the tantalum nitride(TaN) thin-film has been developed for the electronic resistor and capacitor. In this papers, this study presents the surface profile and sheet-resistance property relationship of reactive-sputtered TaN thin film resistor processed by buffer of Ti and Cr on alumina substrate. The TCR properties of the TaN films were discussed in terms of reactive gas ratio, ratio of nitrogen, crystallization and thin films surface morphology due to annealing temperature. It is clear that the TaN thin-films resistor electrical properties are low TCR related with it's buffer layer condition. Ti buffer layer thin film resistor having a good thermal stability and lower TCR properties then Cr buffer expected for the application to the dielectric material of passive component.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.123.2-123.2
• /
• 2016

Mg alloys have been developed for automobile and mobile equipments because of their low density of $1.7g/cm^3$. One of the main problems of Mg alloys is their poor corrosion resistance which has limited their wide applications. Plasma electrolytic oxidation (PEO) method is one of the promising surface treatment methods for Mg alloys. In this presentation, experimental data about the effects of solution composition and form of current are presented and discussed in view of dielectric breakdown and reformation of PEO films The role of various anions of phosphate, silicate, fluoride, carbonate and hydroxide ions is discussed in view of film breakdown and reformation of PEO films.

• 한국진공학회지
• /
• 제4권4호
• /
• pp.380-385
• /
• 1995

AI-1%Si 박막배선에서 수명의 길이 의존성 및 EM에 대한 저항성을 절연보호막 및 온도에 대하여 관찰하였고 ICB증착된 Cu박막배선의 EM에 대한 저항성을 측정하여 진공 열증착된 Cu 박막배선과 비교하였다. 첫째, 절연보호막 처리된 AI-1%Si 박막배선에서 길이가 200$\mu$m에서 1200$\mu$m로 증가함에 따라 전류인가에 의한 평균 수명과 활성화에너지값이 감소하다가 임계길이서부터는 모두 포화되는 것으로 나타났다. 절연보호막 물질에 상관 없이 고온으로 갈수록 임계길이가 짧아지며 그것을 넘는 영역에서는 길에에 대한 의존성이 약해져 임계길이 이상을 갖는 박막배선인 경우 평균수명 및 활성화 에너지값은 길이보다 막특성에 의존하는 것으로 사료된다. 둘째, ICB 증착된 Cu 박막배선의 d.c.인가에 따른 평균 수명은 진공 열층착된 Cu 박막배선보다 길게 나왔으며 e.ectromigration에 대한 활성화 에너지값도 1.70eV로 1.33eV보다 높게 측정되어 EM에 대한 저항성이 증가한 것으로 나타났다.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2007년도 춘계학술대회
• /
• pp.251-251
• /
• 2007

• 한국전기전자재료학회논문지
• /
• 제16권12호
• /
• pp.1136-1141
• /
• 2003

The primary insulation materials used in an oil filled transformer are kraft paper, wood, porcelain and oil. Modern transformers use chemically treated paper to improve its tensile strength and resistance to aging caused by immersion in oil. But these insulation papers are mainly aged by thermal stress. Over the life time of the insulation paper and oil, it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper used in the layer insulation. We made two aging cells in which insulation papers and mineral oil are conducted to test thermal properties. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.406-409
• /
• 2002

The primary insulation system used in an oil-filled transformer is Kraft paper, wood, porcelain and, of course, oil. Modern transformers use paper that is chemically treated to improve its tensile strength properties and resistance to aging caused by immersion in oil. These insulation papers are mainly aged to thermal stress. Over the course of the insulation paper and oil's life it is exposed to high temperatures, oxygen and water. Its interaction with the steel of the tank and core plus the copper and aluminium of the windings will eventually cause the chemical properties of the oil to decay. High temperature have an effect on mechanical strength of cellulous paper using the layer insulation. We made two aging cell in which thermal aging tests of insulation papers and mineral oil are conducted. It is measured dielectric strength, number of acid, moisture, etc. of insulation paper and oil aged in the aging cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.543-546
• /
• 2004

Bias and frequency-dependent impedance is a technique for the investigation of complex conductivity. At low frequency, complex impedance is dominated by resistive component, and at high frequency by capacitive component. We are going to present the results of the bias and frequency-dependent complex impedance in the device structure of $ITO/Alq_3/Al$ in the temperature range between 10K and 300k. And we will show to change radius of Cole-Cole plot. It will be decrease resistance by temperature. Also equivalent electrical circuit and dielectric relaxation can be accomplished by using the complex impedance analysis.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 1993

This Paper studies on thermal oxidation of alumina filled epoxy network polymer used in Extra-High voltage application. The thermal oxidation of surface has investigated by yellow index variation and various electrical properties which are surface resistivity, tracking resistance and AC dielectric strength are estimated by yellow index.