• 한국결정성장학회지
• /
• 제17권6호
• /
• pp.251-255
• /
• 2007

높은 유전상수와 낮은 유전손실을 가지는 $(1-x)BCB-xBNT(BaNd_2Ti_4O_{12})$ (x=20, 30, 40, 50 vol%) 복합 재료를 제작하였다. 제작된 film의 유전 상수와 유전 손실은 1 MHz에서 측정되었고, DSC와 같은 열분석을 통하여 그 경화거동을 관찰하고, BNT의 함량과 film의 경화 거동이 유전특성에 어떠한 영향을 미치는지에 대하여 조사하였다. 충진제로 사용된 BNT가 $20{\sim}50vol%$까지 증가함에 따라 그 복합체의 유전상수는 증가, 유전 손실($tan{\delta}$)은 감소하였고, BCB-BNT 복합체의 유전 상수와 유전 손실($tan{\delta}$)은 경화 반응에 거의 영향을 받지 않는다. 그러나 경화 온도가 증가함에 따라 TCC(Temperature Characteristics of Coefficient)가 감소하는 것으로 복합체의 경화는 $250^{\circ}C$ 이상에서 가장 안정하다는 것을 확인하였다.

• 마이크로전자및패키징학회지
• /
• 제21권4호
• /
• pp.111-115
• /
• 2014

다마신 구리 배선에서의 동적인 전기장에 따른 절연체 파괴거동을 연구하였다. DC, 단극성, 및 이극성 펄스 조건 중에서 절연체의 수명은 이극성 펄스 조건에서 가장 길었다. DC 및 단극성 펄스 조건에서는 절연체에 가해지는 전기장의 방향이 바뀌지 않지만 이극성 펄스 조건에서는 전기장의 방향이 반복적으로 180도 바뀌기 때문에, 이극성 펄스 조건에서는 절연체의 구리오염이 억제되고, 이로 인해서 절연체 수명이 이극성 펄스 조건에서 가장 긴 것으로 판단된다. 단극성 펄스 조건에서 펄스 주파수가 커질수록 DC 조건보다 절연체의 수명이 증가하였다. 이는 절연체 수명에 구리오염 뿐만 아니라 내재적인 절연파괴현상이 상당한 영향을 미치며, 절연체 분자결합파괴가 일어날 확률은 펄스 폭이 좁아질수록 감소한다고 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.33-33
• /
• 2007

In PDP industry, the dielectrics and barrier ribs have been required with low dielectric constant, low melting point and Pb-free composition due to the low power consumption, low signal delay time and the environment restriction. We were studied with $B_2O_3-Al_2O_3$-SrO glass systems about optical, thermal and dielectric properties. The glass forming region of the $B_2O_3-Al_2O_3$-SrO glass systems was narrow due to the amount of the glass former $(B_2O_3)$. The glass transition temperature (Tg) of the glasses was at $550{\sim}590^{\circ}C$. The glasses have 6~8 for the dielectric constant. Furthermore, the transmittance of the glasses was over 80% on the range of the visible ray. From the results, the glasses of the $B_2O_3-Al_2O_3$-SrO glass systems should enable to be a good candidate of the PDP devices for information display with low dielectric constant. The aim of this study is to give a fundamental result of new glass system for low dielectric constant in the information display.

• 한국세라믹학회지
• /
• 제43권3호
• /
• pp.156-161
• /
• 2006

Impedance spectroscopy was applied to the initial hydration of calcium phosphate bone cements in order to investigate the electrical/dielectric properties. Hydration or equivalently setting was monitored as a function of the amount of water and initial powder characteristics. Higher amounts of water produced more open microstructures, leading to higher conductivity and enhanced dielectric constant. The effects of the initial characteristics in the powder were investigated using bone cement powder prepared with and without granulation. Granulated powder exhibited a significant change in resistance and produced a higher dielectric constant than those of conventional powder. Through a simplified modeling, the effects of thickness in reaction products and pore sizes were estimated by the frequency-dependent impedance measurements. Furthermore, impedance spectroscopy was proven to be a highly reliable tool for evaluating the continuous change in pore structure occurring in calcium phosphate bone cements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.185-187
• /
• 1993

0.15BaO-$0.15Sm_2O_3-0.7TiO_2$, ceramics were fabricated by mixed-oxide method. Microwave dielectric properties were investigated with sintering temperature and annealing time. In the specimen sintered at 1350[$^{\circ}C$], dielectric constant, quality factor and temperature coefficient of resonant frequency had a good values of 80.19, 2006 (at 4.6851[GHz]), -27.54[ppm/$^{\circ}C$], respectively. Increasing the annealing time, dielectric constant was almost constant and quality factor was increased. Temperature coefficient of resonant frequency was minimum value (-1.28[ppm/$^{\circ}C$]) at 4 [hr] annealed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.799-802
• /
• 2002

For purer images in plasma display panel, a new dielectric compositions containing neodymium oxide were studied. In the present study, Pb-based compositions were used as mother glasses (PbO-$B_2O_3-SiO_2Nd_2O_3$) and thermal, dielectric, and optical properties were measured. As a result the new dielectric with a rare-earth oxide made selectively visible light penetrated and showed especially noticeable absorption properties at 585 nm that is surely related to the erroneous gas from Ne discharge. Thus, this light purple colored glass composition will help PDP to come true to get better imaging process.

• 한국전기전자재료학회논문지
• /
• 제35권1호
• /
• pp.1-10
• /
• 2022

Two-dimensional materials have shown a great promise for the next-generation electronic materials due to their unique optical, physical, and chemical properties that are distinct from their bulk counterparts. Their atomic-level thickness, the feature for flexible tenability, and exposed huge surface allow various approaches for high-performance nanoscale devices. Especially, this review highlights the recent progress on two-dimensional dielectric nanosheets, which are obtained by cheap and massproducible solution-based exfoliation process, accompanied by the preparation methods, various deposition methods, and the characteristics of devices using a dielectric nanosheet thin films. We also present a perspective on the advantages offered by this two-dimensional dielectric nanosheets for the upcoming future nanoelectonics.

• 한국세라믹학회지
• /
• 제40권4호
• /
• pp.346-349
• /
• 2003

Microwave dielectric characteristics and physical properties of the new Zr$_{1-x}$ (Bn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ (0.2$\leq$x$\geq$ 1.0) system have been investigated as a function of the amount of Bn$_{1}$3/Nb$_{2/3}$ $O_2$substitution. With increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content (x), two phase regions were observed: $\alpha$-Pb $O_2$ solid solution (x<0.4), mixture of the rutile type Zn$_{1}$3/Nb$_{2/3}$Ti $O_4$ and the $\alpha$-Pb $O_2$ solid solution (x$\geq$0.4). In the$\alpha$-Pb $O_2$solid solution region below x<0.4, the Q.f$_{0}$ value sharply increased and the Temperature Coefficient of the Resonant Frequency(TCF) decreased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ contents while dielectric constant (K) showed nearly same value. In the mixture region above x$\geq$4, the dielectric constant and TCF increased with increasing Bn$_{1}$3/Nb$_{2/3}$ $O_2$ content. Zr$_{1-x}$ (Zn$_{1}$3/Nb$_{2/3}$)xTi $O_4$ materials have excellent microwave dielectric properties with K=44.0, Q.f$_{0}$ : 41000 GHz and TCF =-3.0 ppm/$^{\circ}C$ at x=0.35.=0.35. x=0.35.=0.35.

• 한국세라믹학회지
• /
• 제36권12호
• /
• pp.1350-1355
• /
• 1999

Sintering characteristics and dielectric properties of low temperature sinterable Glass/Ceramic dielectric materials were investigated. The dielectric materials which were developed for microwave frequency applications consist of SiO2-TiO2-Bi2O3-RO system(RO:BaO-CaO-SrO) crystallizable glass and Al2O3 as a ceramic filler. Sintering experiments showed that no more densification occurred above 80$0^{\circ}C$ and bulk density and shrinkage depended on Al2O3 content only. Results of dielectric measurements showed that $\varepsilon$r Q$\times$f and $\tau$f of the material containing 30wt% Al2O3 were 17.3, 600 and +23 ppm respectively. Those values for 45 and 60wt% Al2O3 samples were 11.6, 1400, +0.7 ppm and 7.2, 2000, -8.5 ppm, repectively. The results clearly showed that the Glas/Ceramic materials of present experiment decreased in $\varepsilon$r and increased in $\times$f value and changed from positive to negative value in $\tau$f value with the increasement of Al2O3 content.

• 한국재료학회지
• /
• 제13권4호
• /
• pp.259-265
• /
• 2003

For the aim of thin microwave absorbers used in mobile telecommunication frequency band, this study proposed a high permittivity dielectrics(λ/4 spacer) coated with ITO thin films of 377 $\Omega$/sq(impedance transformer). High frequency dielectric properties of ferroelectric ceramics, electrical properties of ITO thin films and microwave absorbing properties of ITO/dielectrics were investigated. Ferroelectric materials including $BaTiO_3$(BT), 0.9Pb($Mg_{1}$3/Nb$_{2}$3/)$O_3$-0.1 $PbTiO_3$(PMN-PT), 0.8 Pb (Mg$_{1}$3/$Nb_{2}$3/)$O_3$-0.2 Pb($Zn_{1}$3$_Nb{2}$3/)$O_3$(PMN-PZN) were prepared by ceramic processing for high permittivity dielectrics,. The ferroelectric materials show high dielectric constant and dielectric loss in the microwave frequency range. The microwave absorbance (at 2 ㎓) of BT, 0.9PMN-0.1PT, and 0.8PMN-0.2PZN were found to be 60%(at a thickness of 3.5 mm), 20% (2.5 mm), and 30% (2.5 mm), respectively. By coating the ITO thin films on the ferroelectric substrates with λ/4 thickness, the microwave absorbance is greatly improved. Particularly, when the surface resistance of ITO films is closed of 377 $\Omega$/sq, the reflection loss is reduced to -20 ㏈(99% absorbance). This is attributed to the wave impedance matching controlled by ITO thin films at a given thickness of high permittivity dielectrics of λ/4 (3.5 mm for BT, 2.5 mm for PMN-PT and PMN-PZN at 2 ㎓). It is, therefore, successfully proposed that the ITO/ferroelectric materials with controlled surface resistance and high dielectric constant can be useful as a thin microwave absorbers in mobile telecommunication frequency band.