• Korean Journal of Materials Research
• /
• v.5 no.2
• /
• pp.151-156
• /
• 1995

Low temperature firing $(Ba, Sr)TiO_{3}$ dielectrics were successfully prepared with lead based glass and those electrical properties were investigated. Different amount of PbO content glass materials were added to dielectrics to investigate the sinterability and its dielectric properties. Also, various compositions of ceramic capacitors were prepared to applicate in multilayer ceramic capacitors. A large amount of experiment has been done with various Pb contented glasses and different sintering temperatures. The sintering temperature of $(Ba,Sr)TiO_{3}$can be reduced from $1350^{\circ}C$to as low as $1050^{\circ}C$ with 4wt% addition of $PbO-ZnO-B_{2}O_{2}$ glass materials. Its dielectric constant at room temperature was up to 8100 with low dielectric loss, 0.005. This ceramic capacitor showed fully fired microstructures with its grain size of 1-3$\mu \textrm{m}$. The sintered body which was sintered at $1150^{\circ}C$ for 2hr with 4wt% $PbO-ZnO-B_{2}O_{2}$ glass material addition satisfied the Z5U specification of the EIAS.

• Journal of electromagnetic engineering and science
• /
• v.10 no.1
• /
• pp.28-34
• /
• 2010

This paper introduces a new U.S. ultra-wideband(UWB: 3.1~10.6 GHz) 1:2 power divider based on a single section Wilkinson type configuration. The divider provides very flat in-band power splitting, high isolation, low insertion loss, sharp roll-off bandpass filtering, and DC blocking characteristics. The circuit consists of a $\lambda$/4 Y resonator, three capacitively coupled $\lambda$/2 short-circuited lines, and a resistor between the two output ports. The circuit structure was simulated with ADS and HFSS, and realized with low-temperature co-fired ceramic(LTCC) green tape, which has a dielectric constant of 7.8. $|S_{11}|$ better than 10 dB, $|S_{21}|$ and $|S_{31}|$ less than 3.2 dB, with both $|S_{22}|$ and $|S_{32}|$ measured as better than 12 dB for the whole UWB band. Measurement results agree closely with HFSS simulation results. The power divider has a compact size of $4\times9\times0.6mm^3$.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1680-1683
• /
• 2003

To describe the performance of an antenna, some parameters are necessary. Some of the parameters are interrelate and not all of them must be specified for complete description of antenna performance. The parameters in characteristics of printed antenna for this analysis are radiation pattern, input impedance, VSWR, S parameter and electromagnetic field. In this paper we will consider two shaped of slot antennas one is triangular slot antenna and other is L - shape slot antenna for compare the radiation pattern, return loss, and VSWR. Two slot antennas are designed to have a resonant frequency at 10 GHz. The microstrip line is designed to be 50 ohms in order to match the measurement system, it has the substrate of the thickness = 1.52 mm and dielectric constant (${\varepsilon}_r$) 2.17. The problem space in the FDTD analysis are $60{\times}123{\times}100$ cells for L-shape slot antenna and $50{\times}171{\times}120$ cells for triangular slot antenna with the cell dimensions ${\Delta}x=0.152\;mm.$, ${\Delta}y={\Delta}z=0.15\;mm.$

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1324_1325
• /
• 2009

The heterolayered $BaTiO_3/(Bi_{0.5}Na_{0.5})TiO_3$ thick films were fabricated by screen printing techniques on alumina substrates electrodes with Pt. We report the improved ferroelectric properties in the heterolayered teteragonal/rhombohedral structure composed of the $BaTiO_3$ and the $(Bi_{0.5}Na_{0.5})TiO_3$ thick films. We investigated the effects of deposition conditions on the structural and electrical properties of the heterolayered BNT/BT thick films. The structural and electrical properties of the heterolayered BNT/BT thick films were studied. All PZT heterolayered thin films show dense and homogeneous structure without the presence of the rosette structure. The dielectric constant, loss and remanent polarization oft heheterolayered BNT/BT thick films were superior to those of single composition $BaTiO_3$ and $(Bi_{1/2}Na_{1/2})TiO_3$, and those values for the heterolayered BNT/BT thick films sintered at $1100^{\circ}C$ were 916, 0.79 and $12.63{\mu}C/cm^2$.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.53-60
• /
• 2004

In this paper, the radar antenna of navigation radar on helicopter was suggested to Ka-band lens antenna. It is type of the streamlined convex lens to reduce the air resistivity when helicopter was navigated. Although aperture area is smaller than the standard antenna just like horns, the gain is higher and beamwidth is smaller than standard horns. We made the lens by using maximum flare angle of the horn and dielectric constant of the lens. As a result, when aperture diameter was 280mm and focal length was 145mm, the return loss -21.25dB, the gain was 32.2dBi, E and H beamwidth was $1.8^{\circ}$(E-plane), $1.4^{\circ}$(H-plane), nearly $1.5^{\circ}$, and side-lobe level was -18.4 dB(E-plane), -19.5dB(H-plane) lower were presented. So this suggested type can be used for the radar antenna of navigation radar on helicopter, and it will possible just a little some sidelobe suppression by using the choked horn as a feeder horn.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.458-463
• /
• 2002

Carbon nanotubes were synthesized at various conditions using Ni-catalytic thermal chemical vapor deposition method and their characteristic properties were investigated by SEM, TEM and Raman spectroscopy. Carbon nanotubes were formed on very fine Ni-catalytic particles. The carbon nanotubes synthesized by thermal decomposition of acetylene at $700^{\circ}C$ had a coiled shape, while those synthesized at $850^{\circ}C$ showed a curved and Y-shape having a bamboo-like morphology. It was found that the carbon nanotube was also made on the fine Ni-catalytic particles formed on the surface of 100~400nm sized large ones after pretreatment with $NH_3$.ber composites show the high dielectric constant and large conduction loss which is increased with anisotropy of fiber arrangement. It is, therefore, proposed that the glass and carbon fiber composites can be used as the impedance transformer (surface layer) and microwave reflector, respectively. By inserting the foam core or honeycomb core (which can be treated as an air layer) between glass and carbon fiber composites, microwave absorption above 10 dB (90% absorbance) in 4-12 GHz can be obtained. The proposed fiber composites laminates with sandwitch structure have high potential as lightweight and high strength microwave absorbers.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.7
• /
• pp.763-768
• /
• 2015

In this paper, a microstrip patch antenna with arrow and ribbon shape for WLAN was designed and manufactured. The antenna was designed on a FR-4 substrate that has a thickness of 0.8mm and a dielectric constant of 4.4. The substrate size is $50{\times}40mm^2$. A commercially available tool was used for simulation to get the optimized parameters and the optimized values were obtained by finding the parameters that act sensitively to the performance of the antenna. The proposed antenna was produced using the optimized values, and characteristics of return loss, gain and radiation pattern in WLAN bands were measured.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.8
• /
• pp.970-974
• /
• 2007

A mixer is a key component in the wireless communication systems. In this paper, we design a mixer which is used in a frequency modulated continuous wave(FMCW) radar system. The frequency sweep range of the radar is from 10 GHz to 11 GHz. The transmitted and received signals of the FMCW radar are applied to LO and RF ports of the mixer, respectively, but the frequency difference between the two signals, which is called "a beat frequency" is under a few KHz and depending on the distance to target. Thus the isolation between the LO and RF ports is very important factor to design this mixer. In this paper we propose a single balanced resistive mixer using GaAs MESFET for this application. We first design a single-ended type resistive mixer using a simulation tool, then design a balanced type to increase the LO-to-RF isolation of the mixer. We fabricated the mixer on the substrate of dielectric constant 10 and thickness 0.635 mm. The measured results show that the isolation and conversion loss of the mixer over the frequency band is 20dB and 10.5dB, respectively. The LO input power for operating the proposed mixer is +3dBm, which is lower than a general conventional mixer's LO power. The 1 dB compression point is 6dBm.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.163-166
• /
• 2005

Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.3
• /
• pp.445-450
• /
• 2017

In this paper, the directional coupler with half-power division is designed and fabricated by using the vertical coupling structure based on the CPW transmission-line. Even-mode and odd-mode of the vertical coupling structure can be analyzed by the conventional CPW-line and the CBCPW-line, respectively, with half thickness of the substrate. The directional coupler is designed by using the tefron substrate with the dielectric constant of 2.55 and the thickness of 0.76mm. Manufactured directional coupler has the center frequency of 2.45 GHz and the bandwidth of 66.1%. Also, the return loss and isolation are 19.52dB and 19.47dB, respectively, at the center frequency.