• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.718-723
• /
• 2004

Crystal structure of $(Ba-{1-x}La_x)[Mg_\frac{1+x}{3}}Nb_\frac{{2-x}{3}}]O_3$ (BLMN) ceramics with 0\leq1x \geq was investigated using synchrotron X-ray powder diffraction (XRD) and high reso(B $a_{l-x}$L $a_{x}$)[M $g_{(1+x)}$3/N $b_{(2-x)/3}$］ $O_3$lution transmission electron microscopy (HRTEM). When the La content, x, is above 0.1, the 1:2 ordered hexagonal structure found in Ba($Mg_\frac{1}{3}Nb_\frac{2}{3}})O_3$(BMN) was transformed into 1:1 ordered cubic structure. The 1:1 ordered cubic structure was maintained up to x=0.7. When x exceeded 0.7, however, BLMN was transformed into 1:1 ordered structure which has cation displacement and in-phase and anti-phase tilt of octahedra.

• 한국전기전자재료학회논문지
• /
• 제23권2호
• /
• pp.118-123
• /
• 2010

The eco-friendly technologies have been extended as matter of international concern due to various diseases and syndromes according to an environmental pollution. In this study, we have manufactured a ceramic cluster with thick film type for anion generation equipment which is maximized anion but minimized ozone contents generated. To develop the formulation of ceramic cluster, we conducted the $Mg_2SiO_4$ powders doped with 10 vol% glass frits as Na-Zn-B-O system and sintered at $1050^{\circ}C$ for 2 hours in air for starting materials and investigated the matching properties between the Ag-Pd electrode and the starting materials. The sintered sample for the composition of cluster has 6.7 of dielectric constant and 32 kV/mm of withstand voltage. The yield of anions was measured according to an electrode pattering, discharge gap between electrode, and thickness of electrode protective layer in the cluster of thick film type. We have manufactured the ceramic clusters with optimized thick film structure that have an anion over a hundred particles and the ozone of 0.6 ppb generated.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.333-334
• /
• 2006

The objective of this study is to fabricate a piezoelectric composite consisting of a piezoelectric ceramic and a high toughness material and to evaluate their electromechanical properties for high force actuator applications. The mixture of the piezoelectric material, PMNZT, and high toughness material, $ZrO_2$, exhibited high piezoelectric properties as well as good mechanical fracture resistance. Up to 2 vol% of $ZrO_2$ in PMNZT matrix, piezoelectric $d_{33}$ coefficient was above 400 pC/N, being 80% of that for the original PMNZT, and the toughness showed twice of the PMNZT. When the volume fraction of the $ZrO_2$ was above 5%, however, the piezoelectric coefficient became abruptly decreased and it approached 20% of value for the PMNZT.

• 한국재료학회지
• /
• 제11권2호
• /
• pp.146-150
• /
• 2001

마이크로파 유전체의 품질계수 측정에 사용되는 cavity resonator 방법에 대하여 실제 측정 결과와 전자기 시뮬레이션엔 의한 결과를 비교하였다. 시뮬레이션 기법을 이용하여 마이크로파 유전체의 산란계수 $S_{12}$ 를 실제로 측정한 간과 시뮬레이션에 의해 구해진 값을 비교하였으며 마이크로파 유전체 내부에 기공이 있는 경우와 유전율이 다른 이차상이 존재할 때 마이크로파 품질계수가 어떻게 변화하는지를 검토하였다. 시뮬레이션을 통하여 기본 공진 모드인 $TE_{01\delta}$모드를 쉽게 찾을 수 있었으며 기공 및 이차상에 의한 품질계수의 저하를 정성적으로 확인할 수 있었다

• 한국재료학회지
• /
• 제7권3호
• /
• pp.251-264
• /
• 1997

공진 주파수 온도 계수($\tau$$_{f}$)가 큰 음의 값을 가지는 (Li$_{1}$2Nd$_{1}$2)TiO$_{3}$(LNT) 고주파 유전체를 125$0^{\circ}C$에서 140$0^{\circ}C$까지의 온도에서 2시간동안 소결을 하였고 소결후에는 소결온도보다 약간 낮은 120$0^{\circ}C$에서 5시간 동안 annealing을 실시를 하였다. 그리고 열처리에 의한 상, 미세구조의 변화를 X-ray, SEM을 통해서 분석하였으며, 열처리가 고주파 유전물성에 대해 미치는 영향에 대해서도 고찰하였다. 130$0^{\circ}C$에서 135$0^{\circ}C$ 근방에서 소결시킨 재료는 Annealing효과에 의해 소결체에 균일한 입도 분포가 증진되었고 체적 밀도가 향상되었으며, 열처리 효과에 의해 품질계수(Q)값이 향상되었고 유전상수($\varepsilon$$_{r}$)는 약간 감소하였으며 공진주파수 온도계수($\tau$$_{f}$)는 더 큰 음의 값을 가지게 되었다. 그러나 135$0^{\circ}C$이상에서 소결한 경우에는 비정상적인 입자 성장에 의해 밀도가 감소되며, 이에 따라 고주파 유전특성이 전반적으로 저하되었다.었다.

• Advances in materials Research
• /
• 제2권2호
• /
• pp.119-131
• /
• 2013

Impedance and electrical conduction studies of $Ba(Nd_{1/2}Nb_{1/2})O_3$ ceramic prepared using conventional high temperature solid-state reaction technique are presented. The crystal symmetry, space group and unit cell dimensions were estimated using Rietveld analysis. X-ray diffraction analysis indicated the formation of a single-phase cubic structure with space group $Pm\bar{3}m$. Energy dispersive X-ray analysis and scanning electron microscopy studies were carried to study the quality and purity of compound. The circuit model fittings were carried out using the impedance data to find the correlation between the response of real system and idealized model electrical circuit. Complex impedance analyses suggested the dielectric relaxation to be of non-Debye type and negative temperature coefficient of resistance character. The correlated barrier hopping model was employed to successfully explain the mechanism of charge transport in $Ba(Nd_{1/2}Nb_{1/2})O_3$. The ac conductivity data were used to evaluate the density of states at Fermi level, minimum hopping length and apparent activation energy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.189-189
• /
• 2008

Due to the environmental issue vast research is going on to replace the widely used lead contented piezoelectric materials. Bismuth sodium titanate (abbreviated as BNT) based bismuth sodium titanate-barium titanate (abbreviated as BNBT) ceramic was prepared by using modified method rather than conventional mixed oxide method. This modification was made to improve the properties of BNT based ceramic. In this procedure $BaTiO_3$ (abbreviated as BT) was prepared using conventional mixed oxide method. Analytical grade raw materials of $BaCO_3$ and $TiO_2$ were weighted and ball milled using ethanol medium. The mixed slurry was dried and sieved under 80 mesh. Then the powder was calcined at $1100^{\circ}C$ for 2 hours. This calcined BT powder was used in the preparation of BNBT. Stoichiometric amount of $Bi_2O_3$, $Na_2CO_3$, $TiO_2$ and BT were weighted and mixed by using ball mill. The used calcination temperature was $850^{\circ}C$ for 2 hours. Calcined powder was taken for another milling step. BNBT disks were pressed to 15 mm of diameter and then cold isostatical press (CIP) was used. Pressed samples were sintered at $1150^{\circ}C$ for 2 hours. The SEM microstructure analysis revealed that the grain shape of the sintered ceramic was polyhedral and grain boundary was well matched where as the sample prepared by conventional method showed irregular arrangement and grain boundary not well matched. And sintered density was better (5.78 g/cc) for the modified method. It was strongly observed that the properties of BNBT ceramic near MPB composition was found to be improved by the modified method compare to the conventional mixed oxide method. The piezoelectric constant dB of 177.33 pC/N, electromechanical coupling factor $k_p$ of 33.4%, dielectric constant $K_{33}^T$ of 688.237 and mechanical quality factor $Q_m$ of 109.37 was found.

• 한국세라믹학회지
• /
• 제39권1호
• /
• pp.26-32
• /
• 2002

유전율(${\varepsilon}_r$) 126, $Q{\cdot}f_{0}(GHz)$값은 2240, 공진주파수의 온도계수(${\tau}_f$) $+68\;ppm/^{\circ}C$의 특성을 갖는 $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 첨가하였을 때의 마이크로파 유전특성의 변화에 대해 고찰하였다. 유전율(${\varepsilon}_r$)은 5wt% $Nd_2O_3$ 첨가시 131로 가장높은 값을 나타내었으며, 이후 첨가량이 증가함에 따라 유전율은 감소함을 보였다. $Q{\cdot}f_{0}(GHz)$값은 9wt% $Nd_2O_3$ 첨가시까지 입계의 치밀화 등에 의해 3533까지 증가하다가 이후 l8wt% $Nd_2O_3$첨가시까지는 비정상적 입계성장의 영향으로 감소함을 보이고, 25 wt% 이상 첨가시에는 제2상인 $Nd_2Ti_2O_7$상의 영향으로 다시 증가함을 보였다. 공진주파수의 온도계수($({\tau}_f$)는 $Nd_2O_3$첨가에 따라 최초의 $+68\;ppm/^{\circ}C$에서 30wt% $Nd_2O_3$ 첨가시 $-46\;ppm/^{\circ}C$까지 변화함을 알 수 있었다. $0.3CaTiO_3-0.7(Li_{1/2}Nd_{1/2})TiO_3에\;Nd_2O_3$를 9wt% 첨가하여 $1425^{\circ}C$에서 3시간동안 소결한 시편에서 유전율(${\varepsilon}_r$)은 108, $Q{\cdot}f_{0}(GHz)$값은 3533, 공진주파수의 온도계수(${\varepsilon}_f$)가 $+6\;ppm/^{\circ}C$인 우수한 마이크로파 유전특성을 얻을 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.143-148
• /
• 2001

PbWO$_4$ can be densified at 85$0^{\circ}C$ and it shows fairy good microwave dielectric properties; dielectric constant($\varepsilon$$_{r}$) of 21.5, quality factor(Q $\times$f$_{0}$) of 37,224 GHz, and temperature coefficient of resonant frequency($\tau$/suf f/) of -31ppm/$^{\circ}C$. Due to its low sintering temperature, PbWO$_4$ can be used as a multilayered chip component at microwave frequency with high electrical performance by using high conductive electrode metals such as Ag and Cu. However, in order to use this material for microwave communication devices, the $\tau$$_{f}$ of PbWO$_4$ must be stabilized to near zero with high Q$\times$f$_{0}$. In present study, PbWO$_4$ was modified by adding TiO$_2$, B$_2$O$_3$, and CuO in order to improve the microwave dielectric properties without increasing the sintering temperature. The addition of TiO$_2$ increased the $\tau$$_{f}$ and $\varepsilon$$_{r}$, due to its high rr(200ppm/$^{\circ}C$) and $\varepsilon$$_{r}$(100). However, the addition of TiO$_2$ reduced the Q$\times$f$_{0}$ value. When the mot ratio of PbWO$_4$ and TiO$_2$ was 0.913:7.087, near zero $\tau$$_{f}$(0.2ppm/$^{\circ}C$) was obtaibed with $\varepsilon$$_{r}$=22.3, and Q$\times$f/$_{0}$=21,443GHz. With this composition, various amount of B$_2$O$_3$ and CuO were added in order to improve the quality factor. The addition, of B$_2$O$_3$ decreased the $\varepsilon$$_{r}$. However, increased Q$\times$f$_{0}$ and $\tau$$_{f}$. When 2.5 wt% of B$_2$O$_3$ was added to the 0.913PbWO$_4$-0.087TiO$_2$ ceramic, $\tau$$_{f}$ =8.2, $\varepsilon$$_{r}$=20.3, Q$\times$f$_{0}$=54784 GHz. When CuO added to the 0.913PbWO$_4$-0.087TiO$_2$ ceramic, $\tau$$_{f}$ was continuously decreased. And $\varepsilon$$_{r}$ . and Q$\times$f$_{0}$ were increased up to 1.0 wt% then decreased. At 0.1 wt% of CuO addition, the 0.913PbWO$_4$-7.087Ti0$_2$ Ceramic Showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$=4.4ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32,932 GHz.> 0/=32,932 GHz.X>=32,932 GHz.> 0/=32,932 GHz.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.577-582
• /
• 2003

공침전물을 원료로 사용한 수열합성법을 통해 저온에서 미립의 BaTiO$_3$ 분말을 합성하였다. 출발물질로는 BaCl$_2$와 TiCl$_4$ 의 수용액을 사용하였다 이들의 혼합용액을 제조한 다음 과산화물 형태의 침전을 얻기 위해 과산화수소수($H_2O$$_2$)를 첨가하였으며 이렇게 준비된 용액을 암모니아수에 적하하여 공침전물을 얻었다. 이 과산화공침전물을 수열합성의 원료로 사용하였으며 반응온도와 시간 및 pH를 달리하면서 합성하였다. pH 13 이상이 요구되어 강염기인 KOH나 NaOH를 사용하는 일반적인 수열합성법과 달리 암모나아수로도 얻을 수 있는 pH 12 이하에서 perovskite BaTiO$_3$가 합성되었으며, 11$0^{\circ}C$ 이상에서 균일하고 미세한 BaTiO$_3$ 분말을 합성할 수 있었다. 13$0^{\circ}C$ 이상에서 얻은 분말의 경우 합성시간과 관계없이 일정한 물성을 보여주었다. 이렇게 합성된 분말은 76 $m^2$/g의 높은 비표면적을 보였으며 20 nm 이하의 미세한 일차입자들이 약하게 결합된 응집체를 이루고 있었다. 수열합성분말을 이용하여 l150~120$0^{\circ}C$의 온도범위에서 소결한 시편의 소결특성 및 유전 물성을 평가하였다.