• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 C
• /
• pp.1829-1831
• /
• 2005

Ferroelectric $Bi_{3.25}Nd_{0.75}Ti_3O_{12}$(BNdT) thin films were proposed for capacitor of FeRAM. The BNdT thin films were grown on Pt/Ti $SiO_2/P-Si(100)$ substrates by the RF magnetron sputtering deposition. The dielectric properties of the BNdT were investigated by varying post-annealing temperatures. Increasing post-annealing temperature, the (117) peak was increased. An increase of rod type grains of BNdT films with increasing post-annealing temperature was observed by the Field Emission Scanning Electron Microscopy(FE-SEM). The dielectric constant and dielectric loss of the BNdT thin films with post-annealing temperature of $700^{\circ}C$ were 418 and 0.37, respectively.

• 한국전기전자재료학회논문지
• /
• 제13권1호
• /
• pp.28-32
• /
• 2000

Structural and electrical properties of (Ba, Sr)TiO\ulcorner (BST) thin films prepared by pulsed laser depositon were investigated to verify the influences of post-annealing in oxygen ambient. Increase of post-anneal-ing time in oxygen ambient resulted in not only grain growth but also improvement of crystallinity of BST films. Although the post-annealing in oxygen ambient resulted in the increase of surface roughness, it assisted the dielectric constant increase by eliminating oxygen vacancies. The electrical property enhancement including high dielectric constant and low leakage current density was associated with introducing high pressure of oxygen during the post-annealing.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.547-549
• /
• 2001

The dielectric constants and dielectric losses of ZrTiO$_4$thin films deposited by DC magnetron reactive sputtering were investigated. The paraelectric properties were measured in the 100kHz range. As the deposition temperature increased (up to 67$0^{\circ}C$), the dielectric losses (tan$\delta$) decreased (down to 0.017$\pm$0.007), while the dielectric constants ($\varepsilon$) were in the range of 35$\pm$7. Post annealing at 80$0^{\circ}C$ in oxygen for 2h reduced tan$\delta$ down to 0.005$\pm$0.001, higher than those of well-sintered bulk ZrTiO$_4$.

• 대한전자공학회논문지SD
• /
• 제41권8호
• /
• pp.37-44
• /
• 2004

본 논문에서는 RF 부품 수동소자 중 가장 기본적인 요소가 되는 전송선로를 DAML(Dtelectric-supported Airbridge Microstrip Line) 형태의 새로운 구조로 제안하였으며, DAMS(Micro Electro Mechanical System) 기술 중 표면 마이크로머싱닝(surface micromachining) 기법을 이용하여 구현하였다. 제안된 구조는 마이크로스트립 라인(microstrip line)의 응용 형태로서 기존의 신호선(signal line)과 ground 사이에 유전체 지지대(dielectric post)를 사용하였고, 신호선을 공중으로 띄우면서 넓은 범위의 임피던스에서 유전체 손실(dielectric loss)을 최소화하였다. 본 논문에서 제작된 전송선로는 10 ㎛의 신호선의 높이와 10 ㎛ × 10 ㎛의 지지대(Post) 면적과 9 ㎛의 지지대(post)의 높이와 5 mm의 길이로 제작되었다. 50 GHz에서 일반적인 마이크로스티립(microstrip) 전송선의 손실이 약 7.5 dB/cm 이상 되는 것과 비교하여 본 논문에서 제안한 구조에서는 50 GHz에서 전송선의 손실이 약 1.1 dB/cm가 되는 것을 얻었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.57-60
• /
• 2003

This paper explained electric field distribution's characteristics of dielectric pellets with a shape of ball to voltage. When discharge gap of electrode and input voltage are each 20[mm], 10000[V], the electric field simulation results of dielectric pellets with a shape of ball with relative dielectric constant of several kind measured stronger electric field near electric pellets with a shape of ball of ${\phi}5$[mm] than $1{\phi}$[mm] and $3.33{\phi}$[mm] at atmosphere. And the maximum electric field of dielectric pellets with a shape of ball over ${\phi}5$[mm] increased about 5[%] to maximum electric field of electric pellets with a shape of ball ${\phi}5$[mm]. And the result of simulation, when relative dielectric constant of dielectric pellets with a shape of ball is 100, it measured about 90[%] of maximum electric field of dielectric pellets with a shape of ball with relative dielectric constant over 1000.

• 한국통신학회논문지
• /
• 제11권1호
• /
• pp.48-52
• /
• 1986

유전체 공진기를 실제로 사용할 때 발생하는 여러가지 영향을 고려한 원통형 유전체공진기의 공진주파수 및 field계수를 결정하기 위한 보다 효율적인 수치해석법과 컴퓨터프로그램을 개발했다. 이 새로운 해석법에는 차폐금속면, 마이크로스트림 substrate, 유전체지지대 및 유전체공진기의 제작시 발생되는 허용오차를 보상하기 위한 유전체 post 등의 영향이 고려됐다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.313-316
• /
• 1997

The effects of aromatic curing agent of MDA contents and post curing conditions on dielectric deterioration characteristics of DGEBA/MDA/SN system were investigated. The dielectric properties were measured by using needle-plane electrode geometry under the commercial AC high electric field application. As the curing agent content increased, the dielectric breakdown strength increased and then decreased slightly. All the trees initiated from the tip of needle electrode and the shape of the tree in this system was a dendrite type.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제36회 동계학술대회 초록집
• /
• pp.171.1-171.1
• /
• 2009

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.621-624
• /
• 1998

This paper presents a new configuration of dielectric bandpass filter using the comb-line filter design theory. This filter is composed of a homogeneous dielectric monoblock $(\varepsilonr=35.5)$ with two metal post and a dielectric sheet $(\varepsilonr=9.8).$ In this structure, the RF leakage is suppressed without other shield housing. For the fabricated filter, insertion loss value in the passband region was 0.9dB(Max.) and return loss value was 19dB(Min). Also, this filter has a attenuation pole in the stopband.

• 센서학회지
• /
• 제28권6호
• /
• pp.360-365
• /
• 2019

A polyvinylidene fluoride (PVDF)-based film speaker is successfully fabricated with enhanced bass sound by incorporating buckled nanospring carbon nanotubes (NS-CNTs) as fillers. Various concentrations up to 1-7 wt% of uniformly dispersed buckled NS-CNTs are loaded to increase the beta (β)-phase fraction, crystallinity, and dielectric constant of the speaker, and this results in the bass part enhancement of about 19 dB full scale (dBFS) at 7 wt% filler loading of the piezoelectric film speaker.