• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.566-569
• /
• 2002

The $(Sr_{0.9}Ca_{0.1})TiO_3$(SCT) thin films are deposited on Pt-coated electrode (Pt/TiN/$SiO_2$/Si) using RF sputtering method. The maximum dielectric constant of SCT thin film is obtained by annealing at $600[^{\circ}C]$. The temperature properties of the dielectric loss have a value within 0.02 in temperature ranges of $-80{\sim}+90[^{\circ}C]$. The capacitance characteristics had a stable value within ${\pm}4[%]$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz].

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.55-59
• /
• 2005

The ($Sr_{1-x}Ca_{x})Ti_{3}$(SCT) thin film are deposited on Pt-coated electrode (Pt/TiN/$SiO_{2}$/Si) using RF sputtering method. The maximum dielectric constant of SCT thin film is obtained by annealing at 600[$^{\circ}C$]. The temperature properties of the dielectric loss have a value within 0.02 in temperature lunges of -80 $\∼$ +90[$^{\circ}C$]). The capacitance characteristics had a stable value within ${\pm}4\%$. The drastic decrease of dielectric constant and increase of dielectric loss in SCT thin films is observed above 200[kHz).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.63-65
• /
• 1989

Piezoelectric BaTiO$_3$-polymer composite were investigated for dielectric and piezoelectric properties with the barium titanate active particle size. Under the condition of the same density and ceramic volume ratio of composite, the dielectric and piezoelectric constant of composite are increasing as the ceramic particle size in composite are increasing. The surface layer model was quoted to explain these phenomena in our system and experimentally confirmed. The connectivity parameter of modified cube model of composite was calculated from the dielectric constant variation as their particle size. The connectivity parameter X and Y were 77.8% and 98.9% respectively. It means that the barium titanate particle distribution in composite nearly approach to the parallel mode. It was experimentally confirmed that the surface layer has low dielectric and nonferroelectric properties. Dielectric constant and thickness of surface layer were calculated from the equivalent circuit of composite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1989년도 춘계학술대회 논문집
• /
• pp.105-106
• /
• 1989

The effects of pyrochlore phase and micostructure on the dielectric properties. such as dielectric constant, dissipation factor, diffusensess coefficient and dielectric hysteresis characteristics, of Lead magnesium niobate(PMN) ceramics have been studied as a function of the amount of excess MgO. The pyrochlore phase in PMN was completely eliminated with the addition of 5 m/o excess MgO. Also, the dielectric constant and remanent polarization increased with increase in grain size, density and then decreased with grain growth inhibitation for further addition of excess MgO. The diffuseness coefficient showed a tendency nearly reverse to that for the dielectric constant and remanent polarization change.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.51-53
• /
• 2005

This study was to measure the minuteness structure, dielectric properties of 0.03PCW-0.07PNN-0.9PZT ceramics according to sintering temperature manufacture the specimens with a general method. The results of this study were gotten such as follows. The crystal structure of ceramic changed the rombohedral structure into teteragonal structure according to rising sintering temperature in XRD. Dielectric constant at $20^{\circ}C$ showed its maximum value 510.599 in specimens sintered at $1100^{\circ}C$ and dielectric loss showed its minimum value 7.43% in specimens sintered at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of frequency showed its minimum value 0.029/kHz at $1100^{\circ}C$. The variation rate of dielectric constant according to the change of temperature showed its minimum value $1.40/^{\circ}C$ at $1500^{\circ}C$.

• The Korean Journal of Ceramics
• /
• 제4권4호
• /
• pp.286-291
• /
• 1998

Dielectric properties of $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$, ceramics prepared by the columbite precursor method have been investigated as a function of the sintering temperature in the range of 1000∼$1250^{\circ}C$. The $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$ ceramics show typical relaxor ferroelectric behavior. As the sintering temperature increased, the dielectric constant increased and the phase transition temperature shifted to lower temperature. The TCK(temperature coefficient of dielectric constant) and VRK (variation rate of dielectric constant) increased with increasing sintering temperature. The $Pb(Mg_{1/3}Nb_{2/3})O_{3}-PbTiO_{3}$ compositions sintered at $1250^{\circ}C$ appear to be suitable for ferroelectric bolometer.

• 대한전기학회논문지
• /
• 제45권1호
• /
• pp.81-85
• /
• 1996

Microwave dielectric properties of 0.15(B $a_{x}$S $r_{0.05}$)O-0.15(S $m_{2}$(1-y)N $d_{2y}$) $O_{3}$-0.7Ti $o_{2}$(x=o.9~0.1[mol.], y=6[m/o]) ceramics were investigated with BaO compositional ratio. Sintered density and resistivity of specimens were independent on the BaO compositional ratio. In the specimen with x=0.975[mol.], dielectric constant, quality factor and temperature coefficient of resonant frequency had good values of 76.52, 3001(at 3[GHz]) and +0.71[ppm/.ceg. C], respectively. By comparing with the stoichiometric compositions of 78.14, 2938(at 3[GHz])+14.19[ppm/.ceg. C], dielectric constant and quality factor showed similar properties, but the temperature coefficient of resonant frequency was highly improved. (author). refs., figs., tabs.s.s.

• 한국진공학회지
• /
• 제7권4호
• /
• pp.368-373
• /
• 1998

초고집적 회로의 미세화에 따라 다층배선에서 기생저항(parasitic resistance)과 정전 용량의 증가는 RC시정수(time constant)의 증가로 인하여 소자의 동작속도를 제한하고 있 다. 이로 인하여 발생되는 배선지연의 문제를 해결하기 위하여 매우 낮은 유전상수를 갖는 층간 절연물질이 필요하다. 이러한 저유전상수 층간절연물질로서 현재 유기계 물질중의 하 나인 a-C:F이 주목받고 있는 물질이다. 본 연구에서는 ECRCVD를 이용하여 a-C:F박막과 Si기판사이의 밀착력을 향상시키기 위하여 a-C:H박막을 500$\AA$증착한 후 a-C:F을 증착전력 500W에서 원료가스의 유량비($C_2F_6, CH_4/(C_2F_6+CH_4)$))를 0~1.0까지 변화시키면서 상온에서 증착하 였다. a-C:F박막의 특성은 SEM, FT0IR, XPS, C-V meter와 AFM등을 이용하여 두께, 결 합상태, 유전상수, 표면형상 및 표면 거칠기를 관찰하였다. a-C:F박막에서 불소함량은 가스 유량비가 1.0일 경우에는 최대 약31at.%정도 검출되었으며, 가스 유량비가 증가됨에 따라 증 가하였다. 또한 유전상수는 a-C:H의 유전상수 $\varepsilon$=3.8에서 $\varepsilon$=2.35까지 감소하였다. 이는 영 구 쌍극자 모멘트가 1.5인 C-H결합은 감소하고 영구 쌍극자 모멘트가 0.6, 0.5인 CF, CF2결 합이 증가하였기 때문이다. 하지만 $400^{\circ}C$에서 질소분위기로 1시간 동안 furnace열처리 후에 가스유량비가 1.0인 a-C:F박막에서 불소의 함량이 감소하여 C-F결합이 줄어들었다. 이로 인하여 유전상수가 열처리전의 2.7에서 열처리후 3.2까지 상승하였다.

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.87-96
• /
• 2004

폴리머/세라믹 복합체는 유기기판용 내장형 커패시터의 가장 유망한 재료다. 폴리머/세라믹 복합체의 유효유전상수를 예측하는 것은 복합재료의 설계에 있어 매우 중요하다. 본 논문에서는 크기가 다른 5가지 $BaTiO_3$ 분말을 이용하여 분말함량에 따른 에폭시/$BaTiO_3$ 복합 내장형 커패시터 필름의 유전상수를 측정하였다. 그 측정 결과를 여러 가지 이론식들에 최소 자승법을 이용해 fitting하여 폴리머/세라믹 복합체의 유효유전상수를 예측하는데 가장 유용한 식을 찾고 BaTiO$_3$ 분말의 유전상수를 추정하고자 하였다. Lichtenecker식과 Jayasundere-Smith식이 에폭시/$BaTiO_3$ 복합 내장형 커패시터 필름의 유전상수 예측에 유용한 것으로 나타났다. 피팅을 통해 계산된 $BaTiO_3$ 분말의 유전상수는 분말의 크기에 따라 100 에서 600 사이였는데 이는 다결정 세라믹 $BaTiO_3$의 유전상수보다 작은 값이다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권11호
• /
• pp.603-608
• /
• 2000

$(Ba, Sr)TiO_{3}$[BST] thin films were fabricated on the Pt/TiO$_2$/SiO$_2$/Si substrate by the RF sputtering. The structure and dielectric properties of the BST thin films with the substrate temperature were investigated. Increasing the substrate temperature, The BST phase increased and barium multi titanate phases decreased. Increasing the frequency, the dielectric constant decreased and the dielectric loss increased. The dielectric constant and dielectric loss of the BST thin films deposited at 50$0^{\circ}C$ were 300 and 0.018, respectively at 1 kHz. The leakage current density of the BST thin films deposited at 50$0^{\circ}C$ was $10^{-9}$ A/$\textrm{cm}^2$ with applied voltage of 3V. Because of the high dielectric constant(300), low dielectric loss(0.018) and low leakage current($10^{-9}$ A/$\textrm{cm}^2$), BST thin films deposited at 50$0^{\circ}C$ is expecting for the application of DRAM.