• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.254-257
• /
• 1998

The twisting and the bending of extruded product are caused by the shapes of products and by the shapes of die surfaces and by the shapes of die land. Because the elliptical shape and the circular shape of the extruded product have the symmetry line of cross-section area, the twisting and the bending of product has not occurred. But the analysis by the DEFORM-3DTM show that the twisting and the bending of extruded product can be occurred by the twisting of the twisting of the die land and by the curving of the die land. The results by the analysis show that the twisting angle of the extruded procduct increases by the twisting angle of the die land and the curvature of the extruded products increases by the radius of bending of the die land.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1996년도 춘계학술대회논문집
• /
• pp.138-144
• /
• 1996

In square die extrusion, flow guide and ide land play important roles for controlling the metal flow in die design. In the present work, the flow guide and the die land are considered for the die construction. Based on ALE description , rigid-viscoplastic finite element analysid is carried out to assess the effects of process and die design parameters. The thermal state affects greatly the product quality in hot extrusion. in the present work, the temperature distribution is also analyzed in theframwork of rigid-viscoplastic finite element computation. As a computational example, hot square die extrusion with flow guide and die land has been analyzed for the profile of a H section.

• 한국정밀공학회지
• /
• 제14권3호
• /
• pp.130-136
• /
• 1997

The velocity distrubution at the exit of extrusion die depends on the width of bearing land very much. When uniform bearing land without flow guide is used, the material which is extended through the same die does not, deflect to the constant direction, but when the flow guide is equipped and then the volume compensation is done accurately, the material deflects to one constant direction. Therfore, the part of problem can be known exactly, and extrusion products of straight shape can be produced by the corrected bearing land width.

• 소성∙가공
• /
• 제18권2호
• /
• pp.156-159
• /
• 2009

Slot coating has been wide spread in photo-resist coating on the glass for liquid crystal display. Die in slot coater consists of manifold and land. Material comes in inlet of the die and flow into the manifold and then flow out through the land. The coating thickness variations along the die length depend upon inside of die design such as manifold and die land. However the coating thickness variations along the moving direction(coating direction) of the coater depend upon the operational conditions of coater as well as die lip design. The coating behaviors including atmospheric air have been investigated in this study. Die geometries considered in this study were nozzle gap and length of the die lip. Coating gap and coating speed were the variables fur coating operational conditions. When the nozzle gap and length of die lip increased climbing effect of PR on the downstream die lip was reduced. Subsequently uniformity of coating thickness improved. Uniformity of coating thickness also enhanced as coating gap and coater speed increased. The uniformity of coating gap was related to the velocity vector distributions on the coating surface.

• 소성∙가공
• /
• 제10권4호
• /
• pp.302-310
• /
• 2001

The twisting and extrusion process of the product with involute helical fin from the round billet is developed by the upper bound analysis. The twisting of extruded product is caused by the twisted inclined die surface connecting the die enterance section and the die exit section linearly. In the analysis, the internal shear surface is defined as the curved twisted plane from the twisting of die surface and the shear work is calculated by the consumption of shear energy. The increase rate of angular velocity is determined by the minimization of plastic work. The angular velocity of die exit can be controlled by the land length and the length of inclined die. The alular velocity assums to be increased linearly by the axial distance from the die enterance to the die exit. The results of the analysis show that the angular velocity of the extruded product increases with the die twisting angle, the reduction of area, and decreases with the die length, the friction constant.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.275-283
• /
• 2014

건축용 접착제로 활용되고 있는 부틸고무는 주로 시트의 형태로 사용된다. 본 연구에서는 컴퓨터 해석을 통해 부틸고무 시트 압출용 다이를 설계하였다. 압출용 다이의 내부는 크게 매니폴드와 랜드로 나뉜다. 매니폴드는 다이중앙에서 유입되는 재료가 폭 방향으로 흐름이 이루어 지도록 하는 역할을 한다. 랜드는 재료가 흐름 방향으로 균일하게 흐르게 하여 균일한 두께의 시트가 성형되도록 한다. 다이는 매니폴드와 랜드 외에도 아일랜드를 설치하여 흐름의 안정을 주도록 하는 경우가 많다. 본 연구에서는 컴퓨터 해석을 통하여 다이에서 매니폴드의 각도와 길이, 랜드 길이 그리고 아일랜드를 설계 변수로 하여 다이 출구에서 다이 폭 방향으로 균일한 흐름이 형성되도록 하는 최적의 다이형상을 연구하였다.

• 한국공작기계학회논문집
• /
• 제11권4호
• /
• pp.82-88
• /
• 2002

Copper bus-bar is made by drawing process and used in many part of industry. Ohen design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper it is analyzed to determine shrink fit value by shrink fit analysis program which is used with APDL/UIDL language in a commercial FEM package, ANSYS. The shrink fit analysis has been developed that enables optimal desist of the dies taking into account the elastic deflections. Elastic deflection is generated in shrink fitting the die inserts and that caused by the stresses generated using DEFORM software for drawing process analysis. This data can be processed as load input data fir a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 철학연구
• /
• 제126권
• /
• pp.1-23
• /
• 2013

오늘날 지구촌에서 풀어야 할 가장 긴박한 문제 가운데 하나는 생태계 위기의 문제이다. 생태계 위기를 해결하는 방법 가운데 하나는 대지와 인간 몸의 생태학적 연결고리를 찾고 그 생태학적 균형을 찾는 일이다. 이를 위해 이 글은 대지와 인간의 관계, 대지와 인간 몸의 관계를 생명의 '살림'이라는 개념을 중심으로 살펴보았다. 이 글은 '생태학적 살림'이라는 개념 아래 인간과 대지의 관계(에쿠멘 윤리), '대지살림', '몸살림'의 문제 등을 차례로 논의하며 생태학적 생명회복의 문제를 다루었다. 21세기의 생태학적 불균형은 인간의 거처(에쿠멘)로서의 대지에 대한 인간의 관계가 건강하게 유지되고 있지 못하다는 것을 의미한다. 에쿠멘 윤리의 요청은 우리에게 대지와 인간의 관계를 건강하게 살려내는 살림살이가 필요하다는 것을 말한다. 제3장에서는 생태학적 대지살림의 개념을 중심으로 대지가 단순히 소유적 경제적 가치가 아니라 우주적 생명회로 안에 있는 생명공동체라는 사실을 논의했다. 제4장에서는 생태학적 몸살림의 개념을 중심으로 인간의 몸이 어떻게 우주적 생명순환과정에 참여하는가를 논의했다. 대지생명에 대한 망각증과 몸의 생태계의 훼손을 겪고 있는 오늘날 우리는 의식이나 생활방식을 전환할 필요가 있으며, 생태학적 생명살림운동을 실천해야 할 것이다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 제4회 압출 및 인발가공 심포지엄
• /
• pp.45-53
• /
• 2001

Copper bus-bar is made by drawing process and used in many part of industry. When design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper, to determine shrink fit value is analyzed by automatic shrink fit analysis program, APDL/UIDL language in a commercial FEM package, ANSYS, has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for drawing process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.166-171
• /
• 2001

Copper bus-bar is made by drawing process and used in many part of industry. When design drawing die for copper bus-bar, design factor is focused on the deformation of die-land by drawing force and shrink fit. In this paper, to determine shrink fit value is analyzed by automatic shrink fit analysis program, APDL/UIDL language in a commercial FEM package, ANSYS, has been developed that enables optimal design of the dies taking into account the elastic deflections generated in shrink fitting the die inserts and that caused by the stresses generated in the process and by using DEFORM software for drawing process analysis. This data can be processed as load input data for a finite element die-stress analysis. Process simulation and stress analysis are thus combined during the drawing die design. The stress analysis of the dies is used to determine optimized dimension of die-land.