• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.165-170
• /
• 2000

In this paper, a general approach to structural analysis of forging die sets is presented and the related design system, AFDEX/DIE, is introduced. Structural analysis of die sets is conducted by the finite element method considering both contact problem and shrink fit. In the approach, amount of shrink fit is controlled by thermal load, i.e., temperature difference between die insert and shrink rings. The loading conditions are extracted automatically from the simulation results obtained by a rigie-thermoviscoplatic finite element method. Typical application examples are given, which show the applicability of the approach and the related program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.6
• /
• pp.560-565
• /
• 2005

This paper deals with the development of manually operated die used for the manufacture of octagonal boxes into two sets of automated die. In particular, theoctagonal boxes are used fur the switch boxes intended fur the cable conduit of buildings or f3r wiring connection. Manufacturing these boxes requires forming the materials using the primary press before they undergo 2nd through 6th processing by the press machine including the four sides of the octagonal outlet box and bending. Such complicated process hikes up labor cost, slows down production, and results in defect rate of $10\%$ or higher; hence the overall rise in manufacturing cost. Moreover, workers avoid this type of work due to the roar and vibration coming from the press and the risk of accident. To eliminate such phenomenon, a CAM die made by integrating five sets of die into one set of die and an automatic conveyor system were developed. As a result, unmanned work was realized with only two units of press and two sets of die; thus solving the problem of work being avoided and saving on manufacturing cost.

• 한국금형공학회:학술대회논문집
• /
• 2008.06a
• /
• pp.197-202
• /
• 2008

With the growth of electrical power needs, demand of the knife-type switches in the distribution boards is increasing. We have developed a knife-type switch which is not currently produced in Korea. The switch was desinged and a comprehensive tooling for it was also accomplished. A total of two sets of injection molds and three sets of press dies were designed and manufactured. The parts for knife switches were produced using the tools. Finally, the parts were assembled together and the switch is now under the test phase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.5
• /
• pp.2009-2014
• /
• 2012

It is very important to minimize the die roll height of gear, in order to maximize the shear cutting surface(tooth surface) of fine blanking. In this paper, the fine blanking tool sets were manufactured in order to study the die roll height according to V-ring position and die chamfer shape. They were constituted of the various die inserts and guide plate inserts with different die chamfer shape and different V-ring distance. The fine blanking experiment was conducted with the fine blanking tool sets and the die roll height of the gear samples was measured. It should be noted that die roll height on the fine blanked gear increased with increasing the V-ring distance and die chamfer angle.

• Transactions of Materials Processing
• /
• v.15 no.5 s.86
• /
• pp.373-381
• /
• 2006

The key technologies necessary to develop and utilize a double-action link-type hydraulic die set for the enclosed die forging are presented in this paper. Various die sets for the enclosed die forging are investigated and the technologies necessary to develop and to utilize a double-action link-type hydraulic die set are introduced in detail with emphasis on the mechanism of the die set and its kinematical behaviors, the force transmission mechanism, the criterion on the enclosed die forging and its application, the forming load prediction and the stress distribution of the link. A double-action link-type hydraulic die set is developed and it is applied to the enclosed die forging of a bevel gear.

• Transactions of Materials Processing
• /
• v.9 no.5
• /
• pp.533-538
• /
• 2000

This study has been carried out to develop a CRT die using hot forging. The conventional CRT die made by casting has defects such as void and inclusion. These defects of the cast die make micro-spots on the surface of the CRT which affect the quality of the final product. So, a hot forging process is developed to avoid these defects of CRT die by the model material test and the rigid-plastic FEM. Firstly, model material tests are carried out with plasticine billets in order to investigate the material flow pattern in the die cavity and to get the reasonable initial values for designing the preform in the FE simulation. And then a finite element analysis has been performed to Predict the preform and the forging load of a CRT die. We also suggest an integrated die-set which combines two die-sets into one die-set to save manufacturing time and cost in case of similar die-size.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.86-89
• /
• 1999

Structural analysis of die set in cold forging is conducted by the finite element method and the results are introduced in this paper. The problem formulation is introduced in detail. In the approach, amount of shrink fit is controlled by thermal load, i.e., temperature difference between die insert and shrink fits. The loading conditions are extracted automatically from a forging simulator. An application example is given.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.94-99
• /
• 2001

Theoretical analysis using finite element method are peformed in order to clarify the formation of the flare-shape defect for multi-step tube sinking process. The parameters of concern were the friction between the tube and the die, and geometrical parameters, such as the die inclination angle, the diameters of the die entrance and exit, and the curvature at the corner of the die exit. The effect of the curvature at the comer of the die exit is dominant for determining the flare-shape defect. In order to minimize the flare-shape defect the curvature at the corner of the die exit should be increased up to a certain level(120mm). Using three-step tube sinking die sets which have different curvatures at the comer of the die exit, several numbers of tests were performed and its results are compared with that of theoretical analysis.

• Transactions of Materials Processing
• /
• v.11 no.3
• /
• pp.223-230
• /
• 2002

Matched die forming technology has been used widely as a sheet metal forming method for a long time. This conventional method, however, needs a high cost and long delivery time to prepare a set of matched dies or, in many cases, several sets of dies. For more than ten years, some alternative methods using single die or non-matched dies have been developed and applied practically in various fields of industry. Elasto-forming, fluid forming, hydro-forming, and blow forming are some examples of these new methods. Recently, a dieless sheet forming technology using a reconfigurable matrix of punch elements has been developed, and started to be used in some industries such as aircraft and railroads. A new concept of dieless forming technology has also been proposed to overcome the drawback of the conventional dieless forming technology.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2001.01a
• /
• pp.224-229
• /
• 2001

When a semiconductor package is assembled, various materials such as die attach adhesive, lead frame, EMC (Epoxy Molding Compound), and gold wire are used. For better preconditioning performance, the combination between the packaging materials by studying the compatibility of their properties as well as superior packaging material selection is important. But it is not an easy task to find proper packaging material sets, since a variety of factors like package design, substrate design, substrate size, substrate treatment, die size, die thickness, die passivation, and customer requirements should be considered. This research applies case-based reasoning(CBR) technique to solve this problem, utilizing prior cases that have been experienced. Our particular interests lie in building decision support model to aid the selection of proper die attach adhesive. The preliminary results show that this approach is promising.