• 한국정밀공학회지
• /
• 제15권11호
• /
• pp.83-92
• /
• 1998

In this paper, an experimental study has been carried out to develop an aluminum forged piston which has good mechanical properties. Through the experiment, the cavity filling, microstructure and mechanical properties of the final product are investigated with respect to chosen process parameters, which are die shape, heat-treatment condition and preform shape. The mechanical properties of the forged piston are compared with these of the cast piston. As the results, an appropriate die-shape is obtained to produce a perfect piston. The suitable heat-treatment condition and preform-shape are found to good hardness and minute microstructure in the forged piston. And we could obtain the mechanical properties(tensile strength, elongation and hardness) of the forged piston are superior to these of the cast piston.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.1-16
• /
• 2023

전기차용 전력변환모듈의 성능향상 요구와 종래의 Si 전력반도체의 한계 극복을 위해 차세대 전력반도체인 wide-bandgap (WBG) 기반 전력반도체로의 전환이 가속화되고 있다. WBG 전력반도체로의 전환을 위해 전력변환모듈 패키징 소재 역시 높은 고온 내구성을 요구받고 있다. 전력변환모듈 패키징 공정 중 하나인 Ag 소결 다이접합 기술은 종래의 고온용 Pb 솔더링의 대체 기술로 주목받고 있다. 본 논문에서는 Ag 소결 다이접합 기술 관련 최신 연구동향에 대해 소개하고자 한다. 소결 다이접합 공정 조건에 따른 접합부 특성을 비교하고 Ag 소결층의 3차원 이미지 구현에 따른 다공성 Ag 소결 접합부의 물성 측정 방법론에 대해 고찰하였다. 또한 열충격 및 파워사이클 신뢰성 평가 연구동향을 분석하였다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.230-238
• /
• 1999

This paper describes a research work of developing computer-aided design of lead frame, semiconductor, with blanking operation which is very precise for progressive working. Approach to the system is based on the knowledge-based rules. Knowledge for the system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. This system has been written in AutoLISP on the AutoCAD using a personal computer and in I-DEAS Drafting Programming Language on the I-DEAS Master Series Drafting with Workstation, HP9000/715(64) and tool kit on the ESPRIT. Transference of data among AutoCAD, I-DEAS Master Series Drafting, and ESPRIT is accomplished by DXF(drawing exchange format) and IGES(initial graphics exchange specification) methods. This system is composed of six modules, which are input and shape treatment, production feasibility check, strip-layout, die-layout, modelling, and post-processor modules. The system can design process planning and Die design considering several factors and generate NC data automatically according to drawings of die-layout module. As forming process of high precision product and die design system using 2-D geometry recognition are integrated with technology of process planning, die design, and CAE analysis, standardization of die part in die design and process planning of high pression product for semiconductor lead frame is possible to set. Results carried out in each module will provide efficiencies to the designer and the manufacturer of lead frame, semiconductor.

• Design & Manufacturing
• /
• 제2권3호
• /
• pp.45-50
• /
• 2008

In the electronic products, connector which play a role of board-to-board connection is an essential part. The manufacture process of this connector involves slitting and bending stage. Recently, manufacturing the connector is becoming more and more difficult as miniaturization of the electronic products. In this study, FEM analysis was performed on slitting and bending process for connector terminal with micro width in order to predict the cause of inaccurate dimension of connector terminal which occurs in actual industrial spot.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 박판성형기술의 진보
• /
• pp.25-36
• /
• 1994

The sheet metal forming process is one of the most important manufacturing processes in the modern industry. From the view point of mechanics involved, it is very difficult to predict whether a newly designed sheet metal part can be formed without defects such as fracture, wrinkling and surface unevenness, etc. In order to reduce the effort taken in the trial-and-error process and to control the process effectively, a systematic method for process modeling is to required. The aim of sheet forming simulation through the process modeling is to reduce the lead time for die disign and manufacture by process modeling is to reduce the lead time for die design and manufacture by means of investigating the deformation mechanics and the mutual interaction between the process parameters. In this paper, the necessity, the present status, and the future technology about CAE of sheet forming simulation have been discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.158-161
• /
• 2005

In this paper, the precision electric discharge machining technology, the powder electric discharge machining technology, is applied to making a cold forging die for making the helical type of clutch gear. Various working conditions are investigated with emphasis on reduction of the electrode wear and enhancement of the surface roughness. Through the research work, the key technology of making the helical gear forging dies is achieved.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.62-65
• /
• 2009

There have been strong demands for micro size screw with high precision due to miniaturization and integration trends for electronic products such as Hard Disk Drives. The thread rolling process for screw manufacturing are lower unit cost, reduced material utilization, and superior mechanical properties compared to the machining process. But little work has been done on the thread rolling of micro size screw. In this paper, we investigate thread rolling process using Finite Element Analysis (FEA) and parameter study for screw manufacturing. And we also carried out compression tests to obtain the material property and to implement into the FE tool for the numerical simulation. In case that parameter of relative position oldies is half length of pitch for maintaining the continuous thread profiles, we found that shear friction factor was 0.9 during the thread rolling process using FEA. We are trying to develop the thread rolling process using the FE-simulation to manufacture screws which have been commonly produced from the industrial level fabrication at present.

• Design & Manufacturing
• /
• 제6권2호
• /
• pp.59-63
• /
• 2012

In various industries, tactile recognition has been one of the important ways in displaying information because peoples like to touch and feel. Especially, how much the tactile information is efficiently recognizable is crucial for visually impaired persons in their daily lifes. However, existing design guidelines are insufficient to lead good tactile recognition. In this study, an experiment was performed to investigate proper tactile shapes (relievo / intaglio vs. filled / unfilled), sizes and depths for efficient tactile recognition. Moreover, this study scrutinized whether the recognition speed or error was varied depending on the type of displayed symbols (open vs. closed types) in tactile. The experimental results revealed that the 'relieve-filled' shape type was more rapidly recognizable than the other shapes, and the 'closed' type symbols (e.g., ${\square }$. ${\bigcirc}$) were more robustly recognizable than the 'open' type symbols (e.g, +, ^). Several design guidelines were presented based on the results. These guidelines can be applied to the design of tactile buttons in the devices that users should control them without visual attention, such as car steering wheels or MP3 players.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.118-121
• /
• 2004

Manufacturing process for milli components has recently gained researcher's focus with the increasing tendency toward highly integrated and micro-scaled parts for electronic devices. The milli-components cannot be formed by the conventional manufacturing process since the parts require higher dimensional accuracy than the conventional ones. In order to enhance the forming accuracy and productivity, various forming procedures proposed and studied by many researchers. In this paper, forming analysis of milli-components has been studied with a new micro-former. In modeling of progressive dies, multi-stage forming sequence has been analyzed with finite element analysis by LS-DYNA3D. The analysis proposes the sequential die and part shapes with the corresponding punch force and dimensional accuracy. The analysis also considers the effect of elastic dies on the dimensional accuracy of the formed parts. The analysis result demonstrates that the elastic analysis in the milli-forming process is indispensable fur accurate forming analysis. The analysis procedure in the paper will provide good information in design of a new micro-former and milli-component.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권3호
• /
• pp.45-50
• /
• 2005

This paper proposed an efficient manufacturing system using the OMM (on-machine measurement) system. The OMM system is software-based 3D modeler for inspection on machine, and it is interfaced with machine tools via RS232C. The software is composed of two inspection modules; one is touch probe operating module, and the other is laser displacement sensor operating module. The module for touch probe needs the inspection feature extracted from CAD data. The touch probe moves to workpiece by three operating modes as follows: manual, general and automatic mode. The operating module of the laser displacement sensor is used to inspect profiles and very small holes. An advantage of this inspection method is the ability to execute on-line inspection during machining or afterward. The efficiency of proposed system which can predict and define the machining errors of each process was verified, so the developed system was applied to inspect a mold-base (cavity, core).