• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.545-549
• /
• 2006

다양한 종류의 제품을 생산하는 프레스금형의 부품 중에서 펀치와 다이플레이트를 제작하는데 주로 W-EDM을 이용한다. W-EDM전에는 기계가공으로 제작된 펀치와 다이플레이트로 제품을 생산하게 되면 생산량이 200만~230만개를 생산하고 금형수명을 다하였다. 그러나 W-EDM으로 제작된 금형으로 제품을 생산하게 되면 생산수량이 70만~80만개를 생산하고 금형수명이 다하였다. 이것은 W-EDM한 후에 발생되는 가공변질층에 기인하는 것으로 사료되므로 W-EDM전과 W-EDM후의 가공면에 대한 SEM촬영을 실시하여 가공변질층의 발생을 확인하고 이에 대한 제거 방법을 연구하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 춘계학술대회논문집
• /
• pp.75-78
• /
• 2000

There are several effective factors to influence die life in the warm forging process. For instance process design die design and die materials etc This study presented heat treatment method which could improve toughness and wear resistance simultaneously in high temperature to apply high speed tool steels like SKH51 to die material for warm forging process. To verify the feasibility of application of heat treatment method mentioned above wear test was performed under the condition of constant time in 40$0^{\circ}C$ Wear coefficient was examined to search a relation between wear amount and time for each material and heat treatment method in 30, 60, and 130 minutes. To quantify the toughness-behavior between room and high temperature impact test was performed and heat fatigue test also fulfilled to compare with the resistance of heat check in room, 200, 400, and $600^{\circ}C$ temperature. On the basis of experimental results mentioned above high speed tool steel was applied to verify appropriateness of newly proposed heat treatment method for die of rotor pole used in automobile alternator. As a result die life of high speed tool steel applied newly proposed heat treatment is longer than that of STD61.

• 소성∙가공
• /
• 제26권3호
• /
• pp.156-161
• /
• 2017

In this study, the reason of die fracture occurring in hot forging of an aluminum fixed scroll was studied, based on experiments and finite element predictions. The material is assumed to be rigid-viscoplastic, and the die is rigid for the finite element predictions. The stress in the tension at the wrap root is known to cause brittle fracture, and the increase in the tensile stress is owing to the unbalanced filling of material into the die cavities between both sides of the warp. Based on the empirical and numerical achievements, the effects of geometrical parameters of the material on the die fracture were examined to find practical measures for elongated die life. It has been shown from the parametric study that the material with the optimized trapezoidal cross-section, which can be easily made during cutting or the optimized cylindrical billet with its eccentric placement in the die cavity, can considerably reduce the magnitude of the tensile stress around the die corner fractured, indicating that economical manufacturing with reduced number of stages and elongated die life can be realized at once using the optimized practical initial material.

• 소성∙가공
• /
• 제7권3호
• /
• pp.282-290
• /
• 1998

In bulk metal forming processes prediction of tool life is very important for saving production cost and achieving good material properties. Generally the service life of tools in metal forming process is limited to a large extent by wear, fracture and plastic deformation of tools. In case of hot and warm forging processes tool life depends on wear over 70%. In this study finite element analyses are con-ducted to warm and hot forging by adopting suggested wear model. By comparison of simulation and eal profile of die suggested wear model. By comparison of simulation and real profile of die suggested model is verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.711-714
• /
• 2002

Although recent research of metallic materials in high temperature fatigue have been much accomplished, many studies about brittle material as a die steel in high temperature fatigue does not have been reported. Especially, the study on the fatigue behavior over the transformation temperature is not studied sufficiently because of its difficult analysis and experiment. Therefore, reliable results of brittle material in high temperature fatigue behavior are needed. In this paper, stress-strain curves and stress-life curves in die STD61 steel at 700 and 900 are carefully examined, as the basic experimental data are used to predict from fatigue life over 700.

• 한국산업정보학회논문지
• /
• 제12권3호
• /
• pp.1-9
• /
• 2007

본 논문에서는 주화나 메달의 제조 공정에서 극인의 수명을 향상시키는 제조 조건에 대하여 연구하였다. 먼저, 경계요소법을 이용하여 응력의 주요 집중부를 찾아내어 실제 압인 실험에서 극인의 최초 균열 위치가 일치하는지를 검증하여 이를 금형의 수명을 측정하는 기준으로 사용하였다. 주화생산 조건의 요소 중, 완제품인 주화의 정해진 규격과 문양의 심도를 만족하는 범위 내에서 압인 공정의 주요 변수인 압인력과 칼라 및 소전의 크기 변화에 따른 금형의 수명을 비교하였다. 그 결과, 칼라와 소전의 직경을 조절하고 이 조건에 적합한 압인력을 사용하면 실험 대상 주화에서 극인의 수명이 최대 60% 증가하는 효과를 볼 수 있음을 보였다.

• 한국기계가공학회지
• /
• 제19권5호
• /
• pp.82-90
• /
• 2020

Due to the complicated shape of the spider, the production method was changed from cold to warm forging. Finite element analysis was performed to predict the forging load and shape using the enclosed hydraulic die set. As the forging load increases due to the spider die volume, die stress analyses were performed to optimize the die design in order to reduce the die stress in various conditions. Large deformation while producing the complicated forging parts induces high forging load, which is one of the main parameters of the forging surface defects. The forging process was analyzed to find out the root cause of the surface defects generated during the spider production for various parameters, thereby revealing that the radius of die in the defect zone influenced the air trap depth, being the root cause of the surface defect. It was verified that die life was increased and the surface defect was eliminated by changing the die design during the mass production test.

• 한국정밀공학회지
• /
• 제13권8호
• /
• pp.80-87
• /
• 1996

The present paper will give some results of the fatigue behavior of typical axi-symmetric forward extrusion die. The extrusion process is analyzed by rigid-plastic FEM and the deformation analysis of extrusion die is conducted by elasto-plastic FEM. To approach the crack problem LEFM (Linear Elastic Fracture Mechanics) is introduced. Using special element in order to conside the sigularity of stress/ strain in the vicinity of the crack tip, stress intensity factor and the effective stress intensity factor is calculated. Applying proper fatigue crack propagation criterion such as Paris/Erdogan fatigue law and maximum principal criterion to these data, then, the angle and the direction of fatigue crack propagation is simulated. In result, it is proved that the simulated fatigue crack propagates in the zigzag path along the radial direction and fatigue life of the extrusion die is evaluated by using the computed crack growth rate.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.405-408
• /
• 2003

Generally, the life of casting mold is limited by fatigue fracture or dimensional inaccuracy originated from wear in high temperature. Although recent research of metallic materials in high temperature fatigue have been much accomplished, many studies on brittle material as a die steel in high temperature fatigue does not have been reported. Especially, the study on the fatigue behavior over the transformation temperature is not studied sufficiently because of its difficult analysis and experiment. Therefore, reliable results of brittle material in high temperature fatigue behavior are needed. In this paper, stress-strain curves and stress-life curves in die STD61 steel are carefully examined between room temperature and 90$0^{\circ}C$, as the basic experimental data are used to predict from fatigue life of casting mold.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2007년도 추계학술발표논문집
• /
• pp.337-340
• /
• 2007

냉간단조금형(Cold Forging Die)의 다이블록(Dieblock)을 제작하는 방법 중의 하나로, 다이블록 제작용 재료를 면가공 하여 다이블록 상면(上面)을 마스터펀치(Master Punch)인 호브(Hob)로 압입(Indentaion) 시켜 절삭가공((Cutting Work)이 아닌 다이호빙(Die Hobbing) 방법으로 임프레션(Impression)을 성형하여 제작하고 있다. 이 방법에 의하여 다이블록의 재료를 합금공구강(Alloy Tool Steel)인 SKD11을 사용하여 제작하고, 스테인리스판(Stainless Sheet Metal)을 제품 재료로 하여 냉간단조가공(Cold Forging Work)을 하였더니 6,000 스트로크(Stroke)에서 금형수명(Die Life)을 다 하였다. 본 논문에서는 다이블록 재료를 고속도공구강(High Speed Tool Steel)인 SKH51로 교체 제작하고, 탄소강(Carbon Steel)인 S45C를 제품 재료로 하여 냉간단조가공을 수행 하였더니 21,000 스트로크에서 금형수명을 다하고 종료 되어 종래의 방법과 비교 검토 하였을 때 350%의 금형수명 연장 효과를 얻게 되었다.