• 제목/요약/키워드: Diagonal measurement

검색결과 58건 처리시간 0.028초

실내 이동로봇의 UKF 위치 추정 및 성능 평가 (UKF Localization of a Mobile Robot in an Indoor Environment and Performance Evaluation)

  • 한준희;고낙용
    • 한국지능시스템학회논문지
    • /
    • 제25권4호
    • /
    • pp.361-368
    • /
    • 2015
  • 본 논문은 실내 환경에서 이동로봇의 위치추정을 위해 무향 칼만 필터(UKF, Unscented Kalman Filter)를 적용하는 방법을 기술한다. 위치 추정을 위해 적용한 무향 칼만 필터 방법은 측정 거리에 따라 오차 공분산 값을 조절하는 새로운 측정 불확실성 모델을 제안한다. 또한 이 방법은 속도정보의 불확실성 및 측정 불확실성에 관한 오차 공분산 행렬의 비 대각 성분을 '0'이 아닌 값으로 설정한다. 이 방법은 100*40m 의 실내 작업환경에서 외수용성 센서로서 레이저영역측정기(Laser range finder)를 가진 차륜형 이동로봇을 이용한 실험을 통하여 평가한다. 이 실험에서는 적응적 불확실성 모델을 사용하지 않는 보통의 방법과 제안된 방법의 추정성능을 비교한다. 또한 이 실험은 오차 공분산의 비 대각성분을 '0'이 아닌 값으로 설정하여 추정 성능이 개선되는 것을 확인한다. 이 논문은 이동로봇의 위치추정을 위한 실용적인 UKF 방법을 구현하고 그 성능을 평가 하는 것을 주요 내용으로 한다.

최소거리법에 의한 온라인 편평도 측정시스템 개발 (On line flatness calibration of engineering surfaces using minimum separation technique)

  • 박희재
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1991년도 추계학술대회 논문집
    • /
    • pp.105-109
    • /
    • 1991
  • A computer aided flatness calibration system has been developed. Rectangular grids based measurement procedure is proposed with closing error technique. giving advantages over conventional diagonal measurement procedures (‘Union Jack’). A new analysis technique has been developed for flatness evaluation called ‘ETT(Enclose Tilt technique)’, enabling minimum separation definition which is acknowledged as standard term for flatness definition. Practical assessment shows the performance of the developed system.

  • PDF

스캐닝 방식 XY 스테이지의 운동오차 분석 (The Analysis of Motion Error in Scanning Type XY Stage)

  • 황주호;박천홍;이찬홍;김동익;김승우
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2004년도 추계학술대회 논문집
    • /
    • pp.1380-1383
    • /
    • 2004
  • The scanning type XY stage is frequently used these days as precision positioning system in equipment for semiconductor or display element. It is requested higher velocity and more precise accuracy for higher productivity and measuring performance. The position accuracy of general stage is primarily affected by the geometric errors caused by parasitic motion of stage, misalignments such as perpendicular error, and thermal expansion of structure. In the case of scanning type stage, H type frame is usually used as base stage which is driven by two actuators such as linear motor. In the point view of scanning process, the stage is used in moving motion. Therefore, dynamic variation is added as significant position error source with other parasitic motion error. Because the scanning axis is driven by two actuators with two position detectors, 2 dimensional position errors have different characteristic compared to general tacked type XY stage. In this study 2D position error of scanning stage is analyzed by 1D heterodyne interferometer calibrator, which can measure 1D linear position error, straightness error, yaw error and pitch error, and perpendicular error. The 2D position error is evaluated by diagonal measurement (ISO230-6). The yaw error and perpendicular error are compensated on the base stage of scanning axis. And, the horizontal straightness error is compensated by cross axis compensation. And, dynamic motion error in scanning motion is analyzed.

  • PDF

외란 관측기를 이용한 시각구동 방법의 구현 (Experiments on a Visual Servoing Approach using Disturbance Observer)

  • 이준수;서일홍
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권10호
    • /
    • pp.1311-1316
    • /
    • 1999
  • A visual servoing method has been proposed based on disturbance observer to eliminate the effect of the off-diagonal component of image feature Jacobian, since performance indices such as measurement sensitivity of visual features, sensitivity of the control to noise and controllability could be improved when an image feature Jacobian was given as a block diagonal matrix. In this paper, experimental results of disturbance observer-based visual servoing are discussed where Samsung FARAMAN-AS1 6-axis industrial robot manipulator is employed. Also, the feature saturator is proposed to stabilize the disturbance observer loop by saturating the differential changes of the image features.

  • PDF

병원의 서비스개선 우선순위 설정을 위한 IPA 적용 (An application of Important-Performance Analysis to set the service improvement priority in hospital)

  • 윤경일
    • 한국병원경영학회지
    • /
    • 제14권2호
    • /
    • pp.21-40
    • /
    • 2009
  • The importance-performance analysis (IPA) is a widely used analytical technique that produces a priority of managerial attention for the customer satisfaction. This study attempted to compare various different approaches of IPA such as direct and indirect measurement of importance, and traditional four quadrants grid model and diagonal grid model of IPA. Data on 17 inpatient service quality attributes were collected from 234 inpatients of a general hospital. Eight IPA grids were produced to compare the result of each model. Based on the study results the strength and weakness of each model were discussed, and a set of recommendations for practical application of the IPA in hospital settings was suggested.

  • PDF

외란관측기를 이용한 시각구동 방법의 구현 (Experiments on a Visual Servoing Approach using Disturbance Observer)

  • 이준수;서일홍;유범재;오상록
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 G
    • /
    • pp.3077-3079
    • /
    • 1999
  • A visual servoing method has been proposed based on disturbance observer to eliminate the effect of the off-diagonal component of image feature Jacobian, since performance indices such as measurement sensitivity of visual features, sensitivity of the control to noise and controllability could be improved when an image feature Jacobian was given as a block diagonal matrix. In this paper, experimental results of disturbance observer-based visual servoing are discussed where Samsung FARAMAN-ASl 6-axis industrial robot manipulator is employed. Also, the feature saturator is proposed to stabilized the disturbance observer loop by saturating the differential changes of the image features.

  • PDF

다축대각단조(MADF) 가공한 구리의 기계적 성질 (Mechanical Properties of OFC Copper Fabricated by Multi-Axial Diagonal Forging (MADF))

  • 권상철;김순태;김다빈;이재근;서승재;윤태식;정효태
    • 소성∙가공
    • /
    • 제27권4호
    • /
    • pp.250-256
    • /
    • 2018
  • Oxygen-free copper (OFC) was prepared as a 90 mm cube and then processed with Multi-Axial Diagonal Forging - Initialization of Prior manufacturing History (MADF). The MADF process has been newly developed as a severe plastic deformation method. The MADF process consists of upset forging with a thickness reduction of 30% and diagonal forging with a diagonal angle of $135^{\circ}$. 1 cycle process consists of a 12 passes forging process. In order to analyze the characteristic changes according to the number of iterations, 1, 2, and 3 cycles of the MADF process were performed. The OFC specimens were MADF processed without surface cracks up to 3 cycles. The microstructure, hardness and tensile test of processed materials were analyzed to study the change of material properties according to the amount of MADF process. The results showed that the MADF process effectively refined the microstructure and increased the strength of OFC. In the case of specimens processed for more than 2 cycles, the grains of all measurement regions were refined to be less than $7{\mu}m$ of grain size. The 1 cycle MADF processed OFC showed the highest mechanical properties with the hardness of 132 HV and tensile strength of 395 MPa. Hardness and strength seemed to be saturated when processed over 2 cycles.

연삭가공 중인 피스톤 링 그루브의 실시간 연삭폭 측정법 개발 (Real-time measurement of the width of piston ring groove on the grinding process)

  • 김병창
    • 한국기계가공학회지
    • /
    • 제13권2호
    • /
    • pp.28-34
    • /
    • 2014
  • A non-contact type measurement system is specially devised to measure the width of a piston ring groove in the grinding process. This system comprises a line camera with an imaging lens, collimated white light source, and a one axis translation stage. When the measurement system movesalong the diagonal direction of the cylinder, the line camera captures an image. By analyzing such images, the width of the piston ring groove can be determined. The experimental results prove that the proposed system is useful, especially as a monitoring system in grinding piston ring grooves on cylinders with accuracy of several micrometers in an area of dozens of millimeters.