• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.466-469
• /
• 2006

We have developed the world's thinnest flexible electrophoretic displays (EPDs). The thin-film displays are 95 ..m thick, which is nearly the same thickness as a standard sheet of paper. Weighing 0.44g including external connection cables, these displays are also probably the world's lightest. We have also developed 7.1-inch-diagonal(paperback-sized) high-resolution flexible EPDs. The displays are large enough to be used as practical e-paper. More than 7 million transistors work correctly on plastic, enabling us to see 3-megapixel images. These flexible displays include active-matrix TFT devices that are fabricated using Suftla transfer technology. Suftla technology demonstrates the potential to achieve thin, flexible displays that will be used as an e-paper in the near future.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.117-120
• /
• 2000

When analyzing the scatting problem of multi-layered structures using closed-form Green's function, one of the main difficulties is that the numerical integrations for the evaluation of diagonal matrix elements converge slowly and are not so stable. Accordingly, even when the integration for the singularity of type e$\^$-jkr//${\gamma}$/, corresponding to the source dipole itself, is performed using such a mathod, this difficulty persists in the integration corresponding to the finite number of complex images. In order to resolve this difficulty, a new technique based upon the Gaussian quadrature in polar coordinates for the evaluation of the two-dimensional generalized exponential integral is presented. Stability of the algorithm and convergence is discussed. Performance is demonstrated for the example of a microstrip patch antenna.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.2
• /
• pp.63-70
• /
• 2018

In this paper, the design of a novel 6-axis compliance device with force/torque sensing capability and the experiment results on force measurement are presented. Unlike the traditional control methods using a force/torque sensor with very limited compliance, the force control method employs a compliant device to provide sufficient compliance between an industrial robot and a rigid environment for more stable force control. The proposed compliance device is designed to have a diagonal stiffness matrix at the tip and uses strain gauge measurement which is robust to dust and oil. The measurement circuit is designed with low-cost IC chips however the force resolution is 0.04N.

• The KIPS Transactions:PartA
• /
• v.8A no.3
• /
• pp.227-234
• /
• 2001

In this paper we propose a block-type parallel preconditioner for solving large sparse nonsymmetric linear systems, which we expect to be scalable. It is Multi-Color Block SOR preconditioner, combined with direct sparse matrix solver. For the Laplacian matrix the SOR method is known to have a nondeteriorating rate of convergence when used with Multi-Color ordering. Since most of the time is spent on the diagonal inversion, which is done on each processor, we expect it to be a good scalable preconditioner. We compared it with four other preconditioners, which are ILU(0)-wavefront ordering, ILU(0)-Multi-Color ordering, SPAI(SParse Approximate Inverse), and SSOR preconditiner. Experiments were conducted for the Finite Difference discretizations of two problems with various meshsizes varying up to $1025{\times}1024$. CRAY-T3E with 128 nodes was used. MPI library was used for interprocess communications, The results show that Multi-Color Block SOR is scalabl and gives the best performances.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1009-1016
• /
• 2000

This paper describes the procedure of increasing the efficiency of experimental modal analysis and updating the quality of FE model using the scaled commercial vehicle frame. In this study, it was found that the experimental modal analysis could be more efficient when the measurements were made on the areas with high kinetic energies. Such areas could be located with the aid of FE modal analysis. Also, the number of measurement points could be decided by considering the dynamic characteristics of full FE model. The correlation of FE model and experimental modal analysis was assessed by the differences between the natural frequencies and MAC matrix, which is based on normal modes. These differences of modal parameters were reduced through the sensitivity and optimization analysis of which objective function consisted of the errors of natural frequencies and the diagonal terms of MAC matrix.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.9
• /
• pp.1188-1197
• /
• 1995

This paper describes an algorithm that reduces computational requirement of the Kalman filter and estimates the signal efficiently. The reference signals are mapped onto the orthogonal wavelet transform domain so that the eigenvalue spread of its autocorrelation matrix could be smaller than that in the time domain. In the wavelet transform domain the autocorrelation matrix is nearly diagonal. Therefore, the transformed signal can be decomposed each orthogonal elements. The Kalman filter can be applied to each orthogonal elements and computational requirement is reduced. The possibility of applying the parallel Kalman filter was verified through the theory and simulation. The eigenvalue spread in the wavelet transform domain is smaller 8.35 times than that in the time domain and the computational requirement is reduced from 1.4 times to 2. 93 times than that of the conventional Kalman filter.

• Journal of the Korean Statistical Society
• /
• v.19 no.1
• /
• pp.54-70
• /
• 1990

Consider the extreme problem : min$(\mu-y)'(\mu-y)$ subject to $A\mu \geq 0$, where A is an $n \times p$ matrix, which often occurs in solving the maximum likelihood estimator with ordered restrictions in parameter space. In case the matrix AA' has all non-positive off-diagonal elements, some propositions in this paper guarantee that the above extreme solutions are achieved at most at n sweep out steps in Gaussian eliminations. Some typicla examples of Sweep-the-Negatives method are given.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.201-206
• /
• 2000

In this work transfer function synthesis method based on FRF data of each substructure is investigated for a complex structure composed of many substructures. Though the transfer function synthesis method has superiority to analyze the characteristics of interfaces among substructures effectively, many problems arise in the computation process, especially matrix inversion process. Due to computational problems, the error between the data obtained by test and the predictions through computations is inevitable. So in this paper, computational aspects in the transfer function synthesis method are examined through a steering system problem of passenger car. For the FBS method, frequency response functions of 3 substructures are measured experimentally. Effects of several parameters such as matrix inversion method, connection conditions between substructures and off-diagonal terms on system response are studied numerically.

• Kyungpook Mathematical Journal
• /
• v.58 no.4
• /
• pp.589-597
• /
• 2018

For $A,B{\in}M_2(\mathbb{C})$, let the Jordan product be AB + BA and G(A) the eigenvalue inclusion set, the Gershgorin set of A. Characterization is obtained for maps ${\phi}:M_2(\mathbb{C}){\rightarrow}M_2(\mathbb{C})$ satisfying $$G[{\phi}(A){\phi}(B)+{\phi}(B){\phi}(A)]=G(AB+BA)$$ for all matrices A and B. In fact, it is shown that such a map has the form ${\phi}(A)={\pm}(PD)A(PD)^{-1}$, where P is a permutation matrix and D is a unitary diagonal matrix in $M_2(\mathbb{C})$.

• The Korean Journal of Applied Statistics
• /
• v.20 no.2
• /
• pp.323-332
• /
• 2007

We present a new type of portmanteau test in the frequency domain which is derived from the discrete cosine transform(DCT). For the stationary time series, DCT coefficients are asymptotically independent and their variances are expressed by linear combinations of autocovariances. The covariance matrix of DCT coefficients for white noises is diagonal matrix whose diagonal elements is the variance of time series. A simple way to test the independence of time series is that we divide DCT coefficients into two or three parts and then compare sample variances. We also do this by testing the slope in the linear regression model of which the response variables are absolute values or squares of coefficients. Simulation results show that the proposed tests has much higher powers than Ljung-Box test in most cases of our experiments.